Hi

The dd issue is for acrn boot or native boot?

Please  boot into native and try it again.

Thanks!

 

BR.

Fuzhong

From: acrn-users@... <acrn-users@...> On Behalf Of siming
Sent: Friday, July 31, 2020 11:34 AM
To: acrn-users@...
Subject: [acrn-users] GPT ERROR when write preempt img to sata on NUC7i5BNB

 

Hi,

    My board is NUC7i5BNB, with two disks: an NVMe disk for the Clear Linux-based Service VM and a SATA disk for the RTVM.Accoring to https://projectacrn.github.io/1.6/getting-started/rt_industry.html#install-and-launch-the-preempt-rt-vm, when I write preempt img to sata, there is always have gpt errors. I have chaged another sata disk, but it's the same error.

root@nuc-acrn /home/acrn # dd if=./preempt-rt-32680.img of=/dev/sda bs=4M oflag=sync status=progress iflag=fullblock seek=0 conv=notrunc

9122611200 bytes (9.1 GB, 8.5 GiB) copied, 124 s, 73.5 MB/s

2186+1 records in

2186+1 records out 

9169755648 bytes (9.2 GB, 8.5 GiB) copied, 126.281 s, 72.6 MB/s

[  171.967643] GPT:Primary header thinks Alt. header is not at the end of the disk.

[  171.967982] GPT:17909678 != 234441647

[  171.968146] GPT:Alternate GPT header not at the end of the disk.

[  171.968406] GPT:17909678 != 234441647

[  171.968616] GPT: Use GNU Parted to correct GPT errors.

[  171.968864]  sda: sda1 sda2 sda3

then I run the launch_hard_rt_vm.sh, it cannot create VM from Hypervisor.

root@nuc-acrn /home/acrn # ./launch_hard_rt_vm.sh

cpu1 online=1 

[ 1525.901370] smpboot: CPU 1 is now offline

[ 1525.902204] vhm: try to offline cpu 1 with lapicid 2

cpu2 online=1 

[ 1525.916019] smpboot: CPU 2 is now offline

[ 1525.917264] vhm: try to offline cpu 2 with lapicid 1

cpu3 online=1 

[ 1525.929538] smpboot: CPU 3 is now offline

[ 1525.930969] vhm: try to offline cpu 3 with lapicid 3

[ 1525.935378] ata1.00: disabled

[ 1525.938524] sd 0:0:0:0: [sda] Synchronizing SCSI cache

[ 1525.939206] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 1525.941643] sd 0:0:0:0: [sda] Stopping disk

[ 1525.941888] sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 1525.956762] pci-stub 0000:00:17.0: claimed by stub

pm by vuart node-index = 1 

SW_LOAD: get ovmf path /usr/share/acrn/bios/OVMF.fd, size 0x200000 

vm_create: hard_rtvm 

[ 1525.981345] vhm_dev_open: opening device node

VHM api version 1.0 

[ 1525.982333] vhm: failed to create VM from Hypervisor !

[ 1526.483047] vhm: failed to create VM from Hypervisor !

[ 1526.983377] vhm: failed to create VM from Hypervisor !

[ 1527.483702] vhm: failed to create VM from Hypervisor !

[ 1527.984028] vhm: failed to create VM from Hypervisor !

[ 1528.484363] vhm: failed to create VM from Hypervisor !

[ 1528.984686] vhm: failed to create VM from Hypervisor !

[ 1529.485021] vhm: failed to create VM from Hypervisor !

[ 1529.985346] vhm: failed to create VM from Hypervisor !

[ 1530.485672] vhm: failed to create VM from Hypervisor !

failed to create VM hard_rtvm 

vm_create failed

[ 1530.994415] vhm: freed vm

Thanks!

ZS

 

 

Please set boot order to Built-in shell;

then type fs1: ENTER

cd EFI/BOOT ENTER

run BOOTX64.EFI

It will boot from native.

 

BR.

Fuzhong

From: acrn-users@... <acrn-users@...> On Behalf Of siming
Sent: Friday, July 31, 2020 2:10 PM
To: acrn-users@...
Subject: Re: [acrn-users] GPT ERROR when write preempt img to sata on NUC7i5BNB

 

thanks for the responds.I did the dd comond in the acrn boot. 

After I install the service VM with./acrn_quick_setup.sh ,I cannot boot into Clear-linux-native-5.5.11-922. The HDMI is nothing out when I choose this.

    Clear Linux OS(acrn)

    Clear Linux OS(Clear-linux-iot-lts2018-sos-4.19.97-104)

    Clear Linux OS(Clear-linux-native-5.5.11-922)

Did I miss something in the set up of the service vm?

thanks

 

在 2020-07-31 12:58:21，"Liu, Fuzhong" <fuzhong.liu@...> 写道：

Hi

The dd issue is for acrn boot or native boot?

Please  boot into native and try it again.

Thanks!

 

BR.

Fuzhong

From: acrn-users@... <acrn-users@...> On Behalf Of siming
Sent: Friday, July 31, 2020 11:34 AM
To: acrn-users@...
Subject: [acrn-users] GPT ERROR when write preempt img to sata on NUC7i5BNB

 

Hi,

    My board is NUC7i5BNB, with two disks: an NVMe disk for the Clear Linux-based Service VM and a SATA disk for the RTVM.Accoring to https://projectacrn.github.io/1.6/getting-started/rt_industry.html#install-and-launch-the-preempt-rt-vm, when I write preempt img to sata, there is always have gpt errors. I have chaged another sata disk, but it's the same error.

root@nuc-acrn /home/acrn # dd if=./preempt-rt-32680.img of=/dev/sda bs=4M oflag=sync status=progress iflag=fullblock seek=0 conv=notrunc

9122611200 bytes (9.1 GB, 8.5 GiB) copied, 124 s, 73.5 MB/s

2186+1 records in

2186+1 records out 

9169755648 bytes (9.2 GB, 8.5 GiB) copied, 126.281 s, 72.6 MB/s

[  171.967643] GPT:Primary header thinks Alt. header is not at the end of the disk.

[  171.967982] GPT:17909678 != 234441647

[  171.968146] GPT:Alternate GPT header not at the end of the disk.

[  171.968406] GPT:17909678 != 234441647

[  171.968616] GPT: Use GNU Parted to correct GPT errors.

[  171.968864]  sda: sda1 sda2 sda3

then I run the launch_hard_rt_vm.sh, it cannot create VM from Hypervisor.

root@nuc-acrn /home/acrn # ./launch_hard_rt_vm.sh

cpu1 online=1 

[ 1525.901370] smpboot: CPU 1 is now offline

[ 1525.902204] vhm: try to offline cpu 1 with lapicid 2

cpu2 online=1 

[ 1525.916019] smpboot: CPU 2 is now offline

[ 1525.917264] vhm: try to offline cpu 2 with lapicid 1

cpu3 online=1 

[ 1525.929538] smpboot: CPU 3 is now offline

[ 1525.930969] vhm: try to offline cpu 3 with lapicid 3

[ 1525.935378] ata1.00: disabled

[ 1525.938524] sd 0:0:0:0: [sda] Synchronizing SCSI cache

[ 1525.939206] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 1525.941643] sd 0:0:0:0: [sda] Stopping disk

[ 1525.941888] sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 1525.956762] pci-stub 0000:00:17.0: claimed by stub

pm by vuart node-index = 1 

SW_LOAD: get ovmf path /usr/share/acrn/bios/OVMF.fd, size 0x200000 

vm_create: hard_rtvm 

[ 1525.981345] vhm_dev_open: opening device node

VHM api version 1.0 

[ 1525.982333] vhm: failed to create VM from Hypervisor !

[ 1526.483047] vhm: failed to create VM from Hypervisor !

[ 1526.983377] vhm: failed to create VM from Hypervisor !

[ 1527.483702] vhm: failed to create VM from Hypervisor !

[ 1527.984028] vhm: failed to create VM from Hypervisor !

[ 1528.484363] vhm: failed to create VM from Hypervisor !

[ 1528.984686] vhm: failed to create VM from Hypervisor !

[ 1529.485021] vhm: failed to create VM from Hypervisor !

[ 1529.985346] vhm: failed to create VM from Hypervisor !

[ 1530.485672] vhm: failed to create VM from Hypervisor !

failed to create VM hard_rtvm 

vm_create failed

[ 1530.994415] vhm: freed vm

Thanks!

ZS

 

 

 

 

Hi

Could you please double check if it can native boot from sda?

1. set boot order to Built-in shell;
2. type fs0: ENTER
3. cd EFI/BOOT ENTER
4. run BOOTX64.EFI

BR.

Fuzhong

 

 

From: acrn-users@... <acrn-users@...> On Behalf Of siming
Sent: Saturday, August 1, 2020 9:50 AM
To: acrn-users@...
Subject: Re: [acrn-users] GPT ERROR when write preempt img to sata on NUC7i5BNB

 

thanks for the direction, the dd commond works fine in the native boot, but the launch rt vm still failed (in acrn boot).

I tried two way to launch the vm, the difference is "-s 2 " of the acrn-dm.

# diff launch_hard_rt_vm1.sh launch_hard_rt_vm2.sh 

<    -s 2,passthru,00/17/0 \

---

>    -s 2,virtio-blk,/dev/sda \

 

launch_hard_rt_vm1.sh error log:

modify_bar_registration: bypass for pci-passthru 0:2.0

[   41.557774] Unknown IOCTL 0x43000055

pci passthru init failed

mngr_client_new: Failed to accept from fd 35, err: Invalid argument

Stop listening 35...

Stop polling 35...

Unable to init vdev (22)

 

launch_hard_rt_vm2.sh error log:

polling 35...

pci init hostbridge

pci init virtio-blk

acrn-dm: Could not open backing file: /dev/sdaListening 35...

: No such file or directory

Could not open backing filepci virtio-blk init failed

mngr_client_new: Failed to accept from fd 35, err: Invalid argument

Stop listening 35...

 

my sata info:

$ lsblk

NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT

sda           8:0    0 111.8G  0 disk 

├─sda1        8:1    0   510M  0 part 

├─sda2        8:2    0    33M  0 part 

└─sda3        8:3    0     8G  0 part 

nvme0n1     259:0    0 238.5G  0 disk 

├─nvme0n1p1 259:1    0   142M  0 part 

├─nvme0n1p2 259:2    0   244M  0 part [SWAP]

└─nvme0n1p3 259:3    0 238.1G  0 part /

$ lspci -nn | grep SATA

00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] [8086:9d03] (rev 21)

 

The attachment is the error logs and the launch script. 

 

Best Regards

 

在 2020-07-31 15:47:15，"Liu, Fuzhong" <fuzhong.liu@...> 写道：

Please set boot order to Built-in shell;

then type fs1: ENTER

cd EFI/BOOT ENTER

run BOOTX64.EFI

It will boot from native.

 

BR.

Fuzhong

From: acrn-users@... <acrn-users@...> On Behalf Of siming
Sent: Friday, July 31, 2020 2:10 PM
To: acrn-users@...
Subject: Re: [acrn-users] GPT ERROR when write preempt img to sata on NUC7i5BNB

 

thanks for the responds.I did the dd comond in the acrn boot. 

After I install the service VM with./acrn_quick_setup.sh ,I cannot boot into Clear-linux-native-5.5.11-922. The HDMI is nothing out when I choose this.

    Clear Linux OS(acrn)

    Clear Linux OS(Clear-linux-iot-lts2018-sos-4.19.97-104)

    Clear Linux OS(Clear-linux-native-5.5.11-922)

Did I miss something in the set up of the service vm?

thanks

 

在 2020-07-31 12:58:21，"Liu, Fuzhong" <fuzhong.liu@...> 写道：

Hi

The dd issue is for acrn boot or native boot?

Please  boot into native and try it again.

Thanks!

 

BR.

Fuzhong

From: acrn-users@... <acrn-users@...> On Behalf Of siming
Sent: Friday, July 31, 2020 11:34 AM
To: acrn-users@...
Subject: [acrn-users] GPT ERROR when write preempt img to sata on NUC7i5BNB

 

Hi,

    My board is NUC7i5BNB, with two disks: an NVMe disk for the Clear Linux-based Service VM and a SATA disk for the RTVM.Accoring to https://projectacrn.github.io/1.6/getting-started/rt_industry.html#install-and-launch-the-preempt-rt-vm, when I write preempt img to sata, there is always have gpt errors. I have chaged another sata disk, but it's the same error.

root@nuc-acrn /home/acrn # dd if=./preempt-rt-32680.img of=/dev/sda bs=4M oflag=sync status=progress iflag=fullblock seek=0 conv=notrunc

9122611200 bytes (9.1 GB, 8.5 GiB) copied, 124 s, 73.5 MB/s

2186+1 records in

2186+1 records out 

9169755648 bytes (9.2 GB, 8.5 GiB) copied, 126.281 s, 72.6 MB/s

[  171.967643] GPT:Primary header thinks Alt. header is not at the end of the disk.

[  171.967982] GPT:17909678 != 234441647

[  171.968146] GPT:Alternate GPT header not at the end of the disk.

[  171.968406] GPT:17909678 != 234441647

[  171.968616] GPT: Use GNU Parted to correct GPT errors.

[  171.968864]  sda: sda1 sda2 sda3

then I run the launch_hard_rt_vm.sh, it cannot create VM from Hypervisor.

root@nuc-acrn /home/acrn # ./launch_hard_rt_vm.sh

cpu1 online=1 

[ 1525.901370] smpboot: CPU 1 is now offline

[ 1525.902204] vhm: try to offline cpu 1 with lapicid 2

cpu2 online=1 

[ 1525.916019] smpboot: CPU 2 is now offline

[ 1525.917264] vhm: try to offline cpu 2 with lapicid 1

cpu3 online=1 

[ 1525.929538] smpboot: CPU 3 is now offline

[ 1525.930969] vhm: try to offline cpu 3 with lapicid 3

[ 1525.935378] ata1.00: disabled

[ 1525.938524] sd 0:0:0:0: [sda] Synchronizing SCSI cache

[ 1525.939206] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 1525.941643] sd 0:0:0:0: [sda] Stopping disk

[ 1525.941888] sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 1525.956762] pci-stub 0000:00:17.0: claimed by stub

pm by vuart node-index = 1 

SW_LOAD: get ovmf path /usr/share/acrn/bios/OVMF.fd, size 0x200000 

vm_create: hard_rtvm 

[ 1525.981345] vhm_dev_open: opening device node

VHM api version 1.0 

[ 1525.982333] vhm: failed to create VM from Hypervisor !

[ 1526.483047] vhm: failed to create VM from Hypervisor !

[ 1526.983377] vhm: failed to create VM from Hypervisor !

[ 1527.483702] vhm: failed to create VM from Hypervisor !

[ 1527.984028] vhm: failed to create VM from Hypervisor !

[ 1528.484363] vhm: failed to create VM from Hypervisor !

[ 1528.984686] vhm: failed to create VM from Hypervisor !

[ 1529.485021] vhm: failed to create VM from Hypervisor !

[ 1529.985346] vhm: failed to create VM from Hypervisor !

[ 1530.485672] vhm: failed to create VM from Hypervisor !

failed to create VM hard_rtvm 

vm_create failed

[ 1530.994415] vhm: freed vm

Thanks!

ZS

 

 

 

 

 

 

I have boot from sata by choose sata in the boot menu:

UEFI:SATA PORT 0 : OS Bootloader

the systen works well, system info :

root@clr-preempt-rt~#: uname -a

Linux clr-preempt-rt 4.19.94-20.iot-lts2018-preempt-rt #1 SMP PREEMPT RT Thu Jan 23 15:05:47 PST 2020 x86_64 GNU/Linux

在 2020-08-03 07:10:44，"Liu, Fuzhong" <fuzhong.liu@...> 写道：

Hi

Could you please double check if it can native boot from sda?

1. set boot order to Built-in shell;
2. type fs0: ENTER
3. cd EFI/BOOT ENTER
4. run BOOTX64.EFI

BR.

Fuzhong

 

 

From: acrn-users@... <acrn-users@...> On Behalf Of siming
Sent: Saturday, August 1, 2020 9:50 AM
To: acrn-users@...
Subject: Re: [acrn-users] GPT ERROR when write preempt img to sata on NUC7i5BNB

 

thanks for the direction, the dd commond works fine in the native boot, but the launch rt vm still failed (in acrn boot).

I tried two way to launch the vm, the difference is "-s 2 " of the acrn-dm.

# diff launch_hard_rt_vm1.sh launch_hard_rt_vm2.sh 

<    -s 2,passthru,00/17/0 \

---

>    -s 2,virtio-blk,/dev/sda \

 

launch_hard_rt_vm1.sh error log:

modify_bar_registration: bypass for pci-passthru 0:2.0

[   41.557774] Unknown IOCTL 0x43000055

pci passthru init failed

mngr_client_new: Failed to accept from fd 35, err: Invalid argument

Stop listening 35...

Stop polling 35...

Unable to init vdev (22)

 

launch_hard_rt_vm2.sh error log:

polling 35...

pci init hostbridge

pci init virtio-blk

acrn-dm: Could not open backing file: /dev/sdaListening 35...

: No such file or directory

Could not open backing filepci virtio-blk init failed

mngr_client_new: Failed to accept from fd 35, err: Invalid argument

Stop listening 35...

 

my sata info:

$ lsblk

NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT

sda           8:0    0 111.8G  0 disk 

├─sda1        8:1    0   510M  0 part 

├─sda2        8:2    0    33M  0 part 

└─sda3        8:3    0     8G  0 part 

nvme0n1     259:0    0 238.5G  0 disk 

├─nvme0n1p1 259:1    0   142M  0 part 

├─nvme0n1p2 259:2    0   244M  0 part [SWAP]

└─nvme0n1p3 259:3    0 238.1G  0 part /

$ lspci -nn | grep SATA

00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] [8086:9d03] (rev 21)

 

The attachment is the error logs and the launch script. 

 

Best Regards

 

在 2020-07-31 15:47:15，"Liu, Fuzhong" <fuzhong.liu@...> 写道：

Please set boot order to Built-in shell;

then type fs1: ENTER

cd EFI/BOOT ENTER

run BOOTX64.EFI

It will boot from native.

 

BR.

Fuzhong

From: acrn-users@... <acrn-users@...> On Behalf Of siming
Sent: Friday, July 31, 2020 2:10 PM
To: acrn-users@...
Subject: Re: [acrn-users] GPT ERROR when write preempt img to sata on NUC7i5BNB

 

thanks for the responds.I did the dd comond in the acrn boot. 

After I install the service VM with./acrn_quick_setup.sh ,I cannot boot into Clear-linux-native-5.5.11-922. The HDMI is nothing out when I choose this.

    Clear Linux OS(acrn)

    Clear Linux OS(Clear-linux-iot-lts2018-sos-4.19.97-104)

    Clear Linux OS(Clear-linux-native-5.5.11-922)

Did I miss something in the set up of the service vm?

thanks

 

在 2020-07-31 12:58:21，"Liu, Fuzhong" <fuzhong.liu@...> 写道：

Hi

The dd issue is for acrn boot or native boot?

Please  boot into native and try it again.

Thanks!

 

BR.

Fuzhong

From: acrn-users@... <acrn-users@...> On Behalf Of siming
Sent: Friday, July 31, 2020 11:34 AM
To: acrn-users@...
Subject: [acrn-users] GPT ERROR when write preempt img to sata on NUC7i5BNB

 

Hi,

    My board is NUC7i5BNB, with two disks: an NVMe disk for the Clear Linux-based Service VM and a SATA disk for the RTVM.Accoring to https://projectacrn.github.io/1.6/getting-started/rt_industry.html#install-and-launch-the-preempt-rt-vm, when I write preempt img to sata, there is always have gpt errors. I have chaged another sata disk, but it's the same error.

root@nuc-acrn /home/acrn # dd if=./preempt-rt-32680.img of=/dev/sda bs=4M oflag=sync status=progress iflag=fullblock seek=0 conv=notrunc

9122611200 bytes (9.1 GB, 8.5 GiB) copied, 124 s, 73.5 MB/s

2186+1 records in

2186+1 records out 

9169755648 bytes (9.2 GB, 8.5 GiB) copied, 126.281 s, 72.6 MB/s

[  171.967643] GPT:Primary header thinks Alt. header is not at the end of the disk.

[  171.967982] GPT:17909678 != 234441647

[  171.968146] GPT:Alternate GPT header not at the end of the disk.

[  171.968406] GPT:17909678 != 234441647

[  171.968616] GPT: Use GNU Parted to correct GPT errors.

[  171.968864]  sda: sda1 sda2 sda3

then I run the launch_hard_rt_vm.sh, it cannot create VM from Hypervisor.

root@nuc-acrn /home/acrn # ./launch_hard_rt_vm.sh

cpu1 online=1 

[ 1525.901370] smpboot: CPU 1 is now offline

[ 1525.902204] vhm: try to offline cpu 1 with lapicid 2

cpu2 online=1 

[ 1525.916019] smpboot: CPU 2 is now offline

[ 1525.917264] vhm: try to offline cpu 2 with lapicid 1

cpu3 online=1 

[ 1525.929538] smpboot: CPU 3 is now offline

[ 1525.930969] vhm: try to offline cpu 3 with lapicid 3

[ 1525.935378] ata1.00: disabled

[ 1525.938524] sd 0:0:0:0: [sda] Synchronizing SCSI cache

[ 1525.939206] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 1525.941643] sd 0:0:0:0: [sda] Stopping disk

[ 1525.941888] sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

[ 1525.956762] pci-stub 0000:00:17.0: claimed by stub

pm by vuart node-index = 1 

SW_LOAD: get ovmf path /usr/share/acrn/bios/OVMF.fd, size 0x200000 

vm_create: hard_rtvm 

[ 1525.981345] vhm_dev_open: opening device node

VHM api version 1.0 

[ 1525.982333] vhm: failed to create VM from Hypervisor !

[ 1526.483047] vhm: failed to create VM from Hypervisor !

[ 1526.983377] vhm: failed to create VM from Hypervisor !

[ 1527.483702] vhm: failed to create VM from Hypervisor !

[ 1527.984028] vhm: failed to create VM from Hypervisor !

[ 1528.484363] vhm: failed to create VM from Hypervisor !

[ 1528.984686] vhm: failed to create VM from Hypervisor !

[ 1529.485021] vhm: failed to create VM from Hypervisor !

[ 1529.985346] vhm: failed to create VM from Hypervisor !

[ 1530.485672] vhm: failed to create VM from Hypervisor !

failed to create VM hard_rtvm 

vm_create failed

[ 1530.994415] vhm: freed vm

Thanks!

ZS

 

 

 

 

 

 

 

Hi Siming

Narrow down your issue here:  

As mentioned in below doc; please modify the script to use the virtio device.

https://projectacrn.github.io/1.6/getting-started/rt_industry.html#install-and-launch-the-preempt-rt-vm

5 Modify the script to use the virtio device.

# NVME pass-through

#echo ${passthru_vpid["nvme"]} > /sys/bus/pci/drivers/pci-stub/new_id

#echo ${passthru_bdf["nvme"]} > /sys/bus/pci/devices/${passthru_bdf["nvme"]}/driver/unbind

#echo ${passthru_bdf["nvme"]} > /sys/bus/pci/drivers/pci-stub/bind

/usr/bin/acrn-dm -A -m $mem_size -s 0:0,hostbridge \

   --lapic_pt \

   --rtvm \

   --virtio_poll 1000000 \

   -U 495ae2e5-2603-4d64-af76-d4bc5a8ec0e5 \

   -s 2,virtio-blk,/dev/sda \

   -s 3,virtio-console,@stdio:stdio_port \

   $pm_channel $pm_by_vuart \

   --ovmf /usr/share/acrn/bios/OVMF.fd \

   hard_rtvm

 

}

 

The reason about below error log for virtio-blk on your side is: your run sata passthrough script before; just reboot can fix it

>>>         acrn-dm: Could not open backing file: /dev/sdaListening 35...

>>> 

>>>         : No such file or directory

 

It is successful log on my side:

root@clr-sos/home/acrn # ./launch_hard_rt_vm.sh

cpu1 online=1

cpu2 online=1

cpu3 online=1

pm by vuart node-index = 1

SW_LOAD: get ovmf path /usr/share/acrn/bios/OVMF.fd, size 0x200000

vm_create: hard_rtvm

VHM api version 1.0

vm_setup_memory: size=0x40000000

open hugetlbfs file /run/hugepage/acrn/huge_lv1/hard_rtvm/495AE2E526034D64AF76D4BC5A8EC0E5

open hugetlbfs file /run/hugepage/acrn/huge_lv2/hard_rtvm/495AE2E526034D64AF76D4BC5A8EC0E5

level 0 free/need pages:0/1 page size:0x200000

level 1 free/need pages:0/1 page size:0x40000000

to reserve more free pages:

to reserve pages (+orig 0): echo 1 > /sys/kernel/mm/hugepages/hugepages-1048576kB/nr_hugepages

to reserve pages (+orig 0): echo 1 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages

now enough free pages are reserved!

 

try to setup hugepage with:

        level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0

        level 1 - lowmem 0x40000000, biosmem 0x0, highmem 0x0

total_size 0x180000000

 

mmap ptr 0x0x7f2717719000 -> baseaddr 0x0x7f2740000000

mmap 0x40000000@0x7f2740000000

touch 1 pages with pagesz 0x40000000

mmap 0x200000@0x7f283fe00000

touch 1 pages with pagesz 0x200000

 

really setup hugepage with:

        level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0

        level 1 - lowmem 0x40000000, biosmem 0x0, highmem 0x0

vm_init_vdevs

pm_by_vuart_init idx: 1, path: /dev/ttyS1

polling 35...

Listening 35...

pci init hostbridge

pci init virtio-blk

pci init virtio-console

tpm: init_vtpm2:Invalid socket path!

                                    /tmp/dm.XtXd2gw     24:     Device (PCI0)

                                                                             Warning  3073 -        Multiple types ^  (Device object requires either a _HID or _ADR, but not both)

 

                        /tmp/dm.XtXd2gw    110:     Processor (CPU0, 0x00, 0x00000000, 0x00) {}

                                                                                               Warning  3168 -                          ^ Legacy Processor() keyword detected. Use Device() keyword instead.

 

                                                  /tmp/dm.XtXd2gw    111:     Processor (CPU1, 0x01, 0x00000000, 0x00) {}

                                                                                                                         Warning  3168 -                          ^ Legacy Processor() keyword detected. Use Device() keyword instead.

 

                                                                            acrn_sw_load

                                                                                        SW_LOAD: partition blob /usr/share/acrn/bios/OVMF.fd size 2097152 copy to guest 0xffe00000

                        SW_LOAD: build e820 9 entries to addr: 0x7f27400ef008

SW_LOAD: entry[0]: addr 0x0000000000000000, size 0x00000000000a0000,  type 0x1

SW_LOAD: entry[1]: addr 0x00000000000a0000, size 0x0000000000060000,  type 0x2

SW_LOAD: entry[2]: addr 0x0000000000100000, size 0x000000003ff00000,  type 0x1

SW_LOAD: entry[3]: addr 0x0000000040000000, size 0x0000000040000000,  type 0x2

SW_LOAD: entry[4]: addr 0x0000000080000000, size 0x0000000008000000,  type 0x2

SW_LOAD: entry[5]: addr 0x00000000db000000, size 0x0000000004000000,  type 0x2

SW_LOAD: entry[6]: addr 0x00000000df000000, size 0x0000000001000000,  type 0x2

SW_LOAD: entry[7]: addr 0x00000000e0000000, size 0x0000000020000000,  type 0x2

SW_LOAD: entry[8]: addr 0x0000000100000000, size 0x0000000040000000,  type 0x2

SW_LOAD: ovmf_entry 0xfffffff0

                              add_cpu

                                     [    1.428076] Loaded X.509 cert 'Build time autogenerated kernel key: 7d0d4348a2d53344b884032935610ca63fc3911b'

[    1.429742] zswap: loaded using pool lzo/zbud

[    1.430841] Btrfs loaded, crc32c=crc32c-intel

[    1.431928] md: Skipping autodetection of RAID arrays. (raid=autodetect will force)

[    1.457635] EXT4-fs (vda3): mounted filesystem with ordered data mode. Opts: (null)

[    1.458872] VFS: Mounted root (ext4 filesystem) on device 253:3.

[    1.462339] devtmpfs: mounted

[    1.463642] Freeing unused kernel image memory: 1224K

[    1.464638] Write protecting the kernel read-only data: 24576k

[    1.467056] Freeing unused kernel image memory: 2008K

[    1.468548] Freeing unused kernel image memory: 1128K

[    1.469452] Run /sbin/init as init process

[    1.620880] systemd[1]: systemd 244 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR -SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)

[    1.623862] systemd[1]: Detected virtualization acrn.

[    1.624544] systemd[1]: Detected architecture x86-64.

[    1.630657] systemd[1]: Set hostname to <clr-preempt-rt>.

[    1.822797] systemd[1]: Created slice system-getty.slice.

[    1.824261] systemd[1]: Created slice system-serial\x2dgetty.slice.

[    1.825647] systemd[1]: Created slice User and Session Slice.

[    1.826651] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.

[    1.827832] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[    1.829366] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.

[    1.830668] systemd[1]: Reached target Local Encrypted Volumes.

[    1.831537] systemd[1]: Reached target Remote File Systems.

[    1.832266] systemd[1]: Reached target Slices.

[    1.835095] systemd[1]: Listening on Process Core Dump Socket.

[    1.836157] systemd[1]: Listening on initctl Compatibility Named Pipe.

[    1.840333] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.

[    1.841799] systemd[1]: Listening on Journal Socket (/dev/log).

[    1.843022] systemd[1]: Listening on Journal Socket.

[    1.843918] systemd[1]: Listening on Network Service Netlink Socket.

[    1.845108] systemd[1]: Listening on udev Control Socket.

[    1.845942] systemd[1]: Listening on udev Kernel Socket.

[    1.848537] systemd[1]: Starting Create list of static device nodes for the current kernel...

[    1.850115] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.

[    1.857603] systemd[1]: Starting Journal Service...

[    1.858787] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.

[    1.868541] systemd[1]: Starting Remount Root and Kernel File Systems...

[    1.874521] systemd[1]: Starting Apply Kernel Variables...

[    1.888076] systemd[1]: Starting udev Coldplug all Devices...

[    1.908507] systemd[1]: Starting udev Kernel Device Manager...

[    1.929253] systemd[1]: Started Create list of static device nodes for the current kernel.

[    1.947839] systemd[1]: Started Remount Root and Kernel File Systems.

[    1.950075] systemd[1]: Started Apply Kernel Variables.

[    1.954582] systemd[1]: Reached target Local File Systems (Pre).

[    1.965499] systemd[1]: Starting Load/Save Random Seed...

[    1.989257] systemd[1]: Started Load/Save Random Seed.

[    2.128280] systemd[1]: Started udev Coldplug all Devices.

[    2.792368] systemd[1]: Started Journal Service.

[    2.810609] systemd-journald[217]: Received client request to flush runtime journal.

[    3.369201] Adding 33788k swap on /dev/vda2.  Priority:-2 extents:1 across:33788k FS

 

clr-preempt-rt login: root

Password:

Last login: Tue Aug  4 09:29:38 on tty1

root@clr-preempt-rt ~ #

root@clr-preempt-rt ~ # uname -a

Linux clr-preempt-rt 4.19.94-20.iot-lts2018-preempt-rt #1 SMP PREEMPT RT Thu Jan 23 15:05:47 PST 2020 x86_64 GNU/Linux

root@clr-preempt-rt ~ #

 

If you really want to passthrough SATA SSDto RTVM, please use acrn-kernel:

https://github.com/projectacrn/acrn-kernel

 

BR.

Fuzhong

 

From: acrn-users@... <acrn-users@...> On Behalf Of siming
Sent: Monday, August 3, 2020 3:04 PM
To: acrn-users@...
Subject: Re: [acrn-users] GPT ERROR when write preempt img to sata on NUC7i5BNB

 

My environment is build according to the doc https://projectacrn.github.io/1.6/getting-started/rt_industry.html

Board NUC7i5BNB, with two disks: an NVMe disk and a SATA disk

# uname -a

Linux nuc-acrn 4.19.97-104.iot-lts2018-sos #1 SMP PREEMPT Wed Jan 22 14:37:18 PST 2020 x86_64 GNU/Linux

# cat /etc/os-release 

BUILD_ID=32680

# acrn-dm -v

DM version is: 1.6-unstable-2020w12.5.140000p_273 (daily tag:acrn-2020w12.5.140000p), build by mockbuild@2020-03-20 01:28:15

Thanks.

在 2020-08-03 14:43:42，"Yin, Fengwei" <fengwei.yin@...> 写道：

>Hi Siming,

> 

>On 8/3/2020 2:23 PM, siming wrote:

>> Hi Fengwei,

>> I have tried two ways to boot preempt uos, but no success. There were 

>> error logs in the previousemail.

>So you saw "pci passthru fail" when you use your launch_hard_rt_vm1.sh?

>Could you please share the whole launch_hard_rt_vm1.sh script?

> 

>Also the version of acrn hypervisor, acrn-dm and SOS kernel version

>could help here. Thanks.

> 

> 

>Regards

>Yin, Fengwei

> 

>>> 

>>>     <    -s 2,*passthru*,00/17/0 \

>>> 

>>>     ---

>>> 

>>>     >    -s 2*,virtio-blk*,/dev/sda \

>>> 

>> 

>> Best Regards.

>> 

>> 

>> 

>> 

>> At 2020-08-03 10:23:11, "Yin, Fengwei" <fengwei.yin@...> wrote:

>> 

>>     Hi Siming,

>> 

>>     I suppose you need passthru the SATA controller to your second VM.

>>     Not using virtio block

>> 

>>     based /dev/sda.

>> 

>> 

>>     Regards

>>     Yin, Fengwei

>>     ------------------------------------

>> 

>>     On 8/3/20 8:52 AM, siming wrote:

>>>     I have boot from sata by choose sata in the boot menu:

>>>     UEFI:SATA PORT 0 : OS Bootloader

>>>     the systen works well, system info :

>>>     root@clr-preempt-rt~#: uname -a

>>>     Linux clr-preempt-rt 4.19.94-20.iot-lts2018-preempt-rt #1 SMP

>>>     PREEMPT RT Thu Jan 23 15:05:47 PST 2020 x86_64 GNU/Linux

>>> 

>>> 

>>> 

>>> 

>>>     在 2020-08-03 07:10:44，"Liu, Fuzhong" <fuzhong.liu@...> 写道：

>>> 

>>>         Hi

>>> 

>>>         Could you please double check if it can native boot from sda?

>>> 

>>>          1. set boot order to Built-in shell;

>>>          2. type fs0: ENTER

>>>          3. cd EFI/BOOT ENTER

>>>          4. run BOOTX64.EFI

>>> 

>>>         BR.

>>> 

>>>         Fuzhong

>>> 

>>>         *From:*acrn-users@...

>>>         <acrn-users@...> *On Behalf Of *siming

>>>         *Sent:* Saturday, August 1, 2020 9:50 AM

>>>         *To:* acrn-users@...

>>>         *Subject:* Re: [acrn-users] GPT ERROR when write preempt img

>>>         to sata on NUC7i5BNB

>>> 

>>>         thanks for the direction, the dd commond works fine in the

>>>         native boot, but the launch rt vm still failed (in acrn boot).

>>> 

>>>         I tried two way to launch the vm, the difference is "-s 2 " of

>>>         the acrn-dm.

>>> 

>>>         # diff launch_hard_rt_vm1.sh launch_hard_rt_vm2.sh

>>> 

>>>         <   -s 2,*passthru*,00/17/0 \

>>> 

>>>         ---

>>> 

>>>         >   -s 2*,virtio-blk*,/dev/sda \

>>> 

>>>         *launch_hard_rt_vm1.sh error log:*

>>> 

>>>         modify_bar_registration: bypass for pci-passthru 0:2.0

>>> 

>>>         [  41.557774] Unknown IOCTL 0x43000055

>>> 

>>>         pci passthru init failed

>>> 

>>>         mngr_client_new: Failed to accept from fd 35, err: Invalid

>>>         argument

>>> 

>>>         Stop listening 35...

>>> 

>>>         Stop polling 35...

>>> 

>>>         Unable to init vdev (22)

>>> 

>>>         *launch_hard_rt_vm2.sh error log:*

>>> 

>>>         polling 35...

>>> 

>>>         pci init hostbridge

>>> 

>>>         pci init virtio-blk

>>> 

>>>         acrn-dm: Could not open backing file: /dev/sdaListening 35...

>>> 

>>>         : No such file or directory

>>> 

>>>         Could not open backing filepci virtio-blk init failed

>>> 

>>>         mngr_client_new: Failed to accept from fd 35, err: Invalid

>>>         argument

>>> 

>>>         Stop listening 35...

>>> 

>>>         my sata info:

>>> 

>>>         $ lsblk

>>> 

>>>         NAME       MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT

>>> 

>>>         sda          8:0    0 111.8G  0 disk

>>> 

>>>         ├─sda1       8:1    0   510M  0 part

>>> 

>>>         ├─sda2       8:2    0    33M  0 part

>>> 

>>>         └─sda3       8:3    0     8G  0 part

>>> 

>>>         nvme0n1    259:0    0 238.5G  0 disk

>>> 

>>>         ├─nvme0n1p1 259:1    0   142M  0 part

>>> 

>>>         ├─nvme0n1p2 259:2    0   244M  0 part [SWAP]

>>> 

>>>         └─nvme0n1p3 259:3    0 238.1G  0 part /

>>> 

>>>         $ lspci -nn | grep SATA

>>> 

>>>         00:17.0 SATA controller [0106]: Intel Corporation Sunrise

>>>         Point-LP SATA Controller [AHCI mode] [8086:9d03] (rev 21)

>>> 

>>>         The attachment is the error logs and the launch script.

>>> 

>>>         Best Regards

>>> 

>>>         在2020-07-31 15:47:15，"Liu, Fuzhong" <fuzhong.liu@...

>>>         <mailto:fuzhong.liu@...>> 写道：

>>> 

>>>             Please set boot order to Built-in shell;

>>> 

>>>             then type fs1: ENTER

>>> 

>>>             cd EFI/BOOT ENTER

>>> 

>>>             run BOOTX64.EFI

>>> 

>>>             It will boot from native.

>>> 

>>>             BR.

>>> 

>>>             Fuzhong

>>> 

>>>             *From:*acrn-users@...

>>>             <mailto:acrn-users@...>

>>>             <acrn-users@...

>>>             <mailto:acrn-users@...>> *On Behalf Of

>>>             *siming

>>>             *Sent:* Friday, July 31, 2020 2:10 PM

>>>             *To:* acrn-users@...

>>>             <mailto:acrn-users@...>

>>>             *Subject:* Re: [acrn-users] GPT ERROR when write preempt

>>>             img to sata on NUC7i5BNB

>>> 

>>>             thanks for the responds.I did the dd comond in the acrn boot.

>>> 

>>>             After I install the service VM with./acrn_quick_setup.sh

>>>             ,I cannot boot into /Clear-linux-native-5.5.11-922/. The

>>>             HDMI is nothing out when I choose this.

>>> 

>>>             /  Clear Linux OS(acrn)/

>>> 

>>>             /  Clear Linux OS(Clear-linux-iot-lts2018-sos-4.19.97-104)/

>>> 

>>>             /  Clear Linux OS(Clear-linux-native-5.5.11-922)/

>>> 

>>>             Did I miss something in the set up of the service vm?

>>> 

>>>             thanks

>>> 

>>>             在2020-07-31 12:58:21，"Liu, Fuzhong"

>>>             <fuzhong.liu@... <mailto:fuzhong.liu@...>> 写道：

>>> 

>>>                 Hi

>>> 

>>>                 The dd issue is for acrn boot or native boot?

>>> 

>>>                 Please  boot into native and try it again.

>>> 

>>>                 Thanks!

>>> 

>>>                 BR.

>>> 

>>>                 Fuzhong

>>> 

>>>                 *From:*acrn-users@...

>>>                 <mailto:acrn-users@...>

>>>                 <acrn-users@...

>>>                 <mailto:acrn-users@...>> *On Behalf

>>>                 Of *siming

>>>                 *Sent:* Friday, July 31, 2020 11:34 AM

>>>                 *To:* acrn-users@...

>>>                 <mailto:acrn-users@...>

>>>                 *Subject:* [acrn-users] GPT ERROR when write preempt

>>>                 img to sata on NUC7i5BNB

>>> 

>>>                 Hi,

>>> 

>>>                   My board is NUC7i5BNB, with two disks: an NVMe disk

>>>                 for the Clear Linux-based Service VM and a SATA disk

>>>                 for the RTVM.Accoring to

>>>                 https://projectacrn.github.io/1.6/getting-started/rt_industry.html#install-and-launch-the-preempt-rt-vm,

>>>                 when I write preempt img to sata, there is always have

>>>                 gpt errors. I have chaged another sata disk, but it's

>>>                 the same error.

>>> 

>>>                 |root@nuc-acrn /home/acrn # dd

>>>                 if=./preempt-rt-32680.img of=/dev/sda bs=4M oflag=sync

>>>                 status=progress iflag=fullblock seek=0 conv=notrunc|

>>> 

>>>                 |9122611200 bytes (9.1 GB, 8.5 GiB) copied, 124 s, 73.5

>>>                 MB/s|

>>> 

>>>                 |2186+1 records in|

>>> 

>>>                 |2186+1 records out |

>>> 

>>>                 |9169755648 bytes (9.2 GB, 8.5 GiB) copied, 126.281 s,

>>>                 72.6 MB/s|

>>> 

>>>                 |[  171.967643] GPT:Primary header thinks Alt. header

>>>                 is not at the end of the disk.|

>>> 

>>>                 |[  171.967982] GPT:17909678 != 234441647|

>>> 

>>>                 |[  171.968146] GPT:Alternate GPT header not at the end

>>>                 of the disk.|

>>> 

>>>                 |[  171.968406] GPT:17909678 != 234441647|

>>> 

>>>                 |[  171.968616] GPT: Use GNU Parted to correct GPT errors.|

>>> 

>>>                 |[  171.968864]  sda: sda1 sda2 sda3|

>>> 

>>>                 then I run the launch_hard_rt_vm.sh, it cannot create

>>>                 VM from Hypervisor.

>>> 

>>>                 |root@nuc-acrn /home/acrn # ./launch_hard_rt_vm.sh|

>>> 

>>>                 |cpu1 online=1 |

>>> 

>>>                 |[ 1525.901370] smpboot: CPU 1 is now offline|

>>> 

>>>                 |[ 1525.902204] vhm: try to offline cpu 1 with lapicid 2|

>>> 

>>>                 |cpu2 online=1 |

>>> 

>>>                 |[ 1525.916019] smpboot: CPU 2 is now offline|

>>> 

>>>                 |[ 1525.917264] vhm: try to offline cpu 2 with lapicid 1|

>>> 

>>>                 |cpu3 online=1 |

>>> 

>>>                 |[ 1525.929538] smpboot: CPU 3 is now offline|

>>> 

>>>                 |[ 1525.930969] vhm: try to offline cpu 3 with lapicid 3|

>>> 

>>>                 |[ 1525.935378] ata1.00: disabled|

>>> 

>>>                 |[ 1525.938524] sd 0:0:0:0: [sda] Synchronizing SCSI cache|

>>> 

>>>                 |[ 1525.939206] sd 0:0:0:0: [sda] Synchronize Cache(10)

>>>                 failed: Result: hostbyte=DID_BAD_TARGET

>>>                 driverbyte=DRIVER_OK|

>>> 

>>>                 |[ 1525.941643] sd 0:0:0:0: [sda] Stopping disk|

>>> 

>>>                 |[ 1525.941888] sd 0:0:0:0: [sda] Start/Stop Unit

>>>                 failed: Result: hostbyte=DID_BAD_TARGET

>>>                 driverbyte=DRIVER_OK|

>>> 

>>>                 |[ 1525.956762] pci-stub 0000:00:17.0: claimed by stub|

>>> 

>>>                 |pm by vuart node-index = 1 |

>>> 

>>>                 |SW_LOAD: get ovmf path /usr/share/acrn/bios/OVMF.fd,

>>>                 size 0x200000 |

>>> 

>>>                 |vm_create: hard_rtvm |

>>> 

>>>                 |[ 1525.981345] vhm_dev_open: opening device node|

>>> 

>>>                 |VHM api version 1.0 |

>>> 

>>>                 |[ 1525.982333] vhm: failed to create VM from Hypervisor !|

>>> 

>>>                 |[ 1526.483047] vhm: failed to create VM from Hypervisor !|

>>> 

>>>                 |[ 1526.983377] vhm: failed to create VM from Hypervisor !|

>>> 

>>>                 |[ 1527.483702] vhm: failed to create VM from Hypervisor !|

>>> 

>>>                 |[ 1527.984028] vhm: failed to create VM from Hypervisor !|

>>> 

>>>                 |[ 1528.484363] vhm: failed to create VM from Hypervisor !|

>>> 

>>>                 |[ 1528.984686] vhm: failed to create VM from Hypervisor !|

>>> 

>>>                 |[ 1529.485021] vhm: failed to create VM from Hypervisor !|

>>> 

>>>                 |[ 1529.985346] vhm: failed to create VM from Hypervisor !|

>>> 

>>>                 |[ 1530.485672] vhm: failed to create VM from Hypervisor !|

>>> 

>>>                 |failed to create VM hard_rtvm |

>>> 

>>>                 |vm_create failed|

>>> 

>>>                 |[ 1530.994415] vhm: freed vm|

>>> 

>>>                 Thanks!

>>> 

>>>                 ZS

>>> 

>>> 

>>> 

>> 

> 

>