acrn-users@lists.projectacrn.org | ACRN on CoffeeLake

Home Messages Hashtags Subgroups

Date Date 1 - 9 of 9

ACRN on CoffeeLake

Rajagopal Aravindan #436 Hello Victor, W.r.t the subject, we were able to get ACRN to boot into SOS. However, when trying to start UOS we run into the below error GVT: open /sys/kernel/gvt/control/create_gvt_instance failed GVT: init failed : No such file or directory pci pci-gvt init failed I guess its related to graphics virtualization but not able to get past that. Any inputs on this, please ? PFB (my signature) the board & sdc xmls. Thanks, Rajagopal board.xml <acrn-config board="acer"> <BIOS_INFO> BIOS Information Vendor: Acer Version: P21-A1E Release Date: 04/12/2019 BIOS Revision: 5.12 </BIOS_INFO> <BASE_BOARD_INFO> Base Board Information Manufacturer: Acer Product Name: H310CH5-M23 Version: P21-A1E </BASE_BOARD_INFO> <PCI_DEVICE> 00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 08) 00:02.0 VGA compatible controller: Intel Corporation 8th Gen Core Processor Gaussian Mixture Model Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] 00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model Region 0: Memory at df12f000 (64-bit, non-prefetchable) [disabled] [size=4K] 00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller Region 0: Memory at df110000 (64-bit, non-prefetchable) [size=64K] 00:14.2 Signal processing controller: Intel Corporation 200 Series PCH Thermal Subsystem Region 0: Memory at df12e000 (64-bit, non-prefetchable) [size=4K] 00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1 Region 0: Memory at df12d000 (64-bit, non-prefetchable) [size=4K] 00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode] Region 0: Memory at df128000 (32-bit, non-prefetchable) [size=8K] Region 1: Memory at df12c000 (32-bit, non-prefetchable) [size=256] Region 5: Memory at df12b000 (32-bit, non-prefetchable) [size=2K] 00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 (rev f0) 00:1f.0 ISA bridge: Intel Corporation Device a2ca 00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller Region 0: Memory at df124000 (32-bit, non-prefetchable) [disabled] [size=16K] 00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio Region 0: Memory at df120000 (64-bit, non-prefetchable) [size=16K] Region 4: Memory at df100000 (64-bit, non-prefetchable) [size=64K] 00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller Region 0: Memory at df12a000 (64-bit, non-prefetchable) [size=256] 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Region 2: Memory at df004000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at df000000 (64-bit, non-prefetchable) [size=16K] </PCI_DEVICE> <PCI_VID_PID> 00:00.0 0600: 8086:3e1f (rev 08) 00:02.0 0300: 8086:3e91 00:08.0 0880: 8086:1911 00:14.0 0c03: 8086:a2af 00:14.2 1180: 8086:a2b1 00:16.0 0780: 8086:a2ba 00:17.0 0106: 8086:a282 00:1c.0 0604: 8086:a294 (rev f0) 00:1f.0 0601: 8086:a2ca 00:1f.2 0580: 8086:a2a1 00:1f.3 0403: 8086:a2f0 00:1f.4 0c05: 8086:a2a3 01:00.0 0200: 10ec:8168 (rev 15) </PCI_VID_PID> <WAKE_VECTOR_INFO> #define WAKE_VECTOR_32 0xB65B0F0CUL #define WAKE_VECTOR_64 0xB65B0F18UL </WAKE_VECTOR_INFO> <RESET_REGISTER_INFO> #define RESET_REGISTER_ADDRESS 0xCF9UL #define RESET_REGISTER_SPACE_ID SPACE_SYSTEM_IO #define RESET_REGISTER_VALUE 0x6U </RESET_REGISTER_INFO> <PM_INFO> #define PM1A_EVT_SPACE_ID SPACE_SYSTEM_IO #define PM1A_EVT_BIT_WIDTH 0x20U #define PM1A_EVT_BIT_OFFSET 0x0U #define PM1A_EVT_ADDRESS 0x1800UL #define PM1A_EVT_ACCESS_SIZE 0x2U #define PM1B_EVT_SPACE_ID SPACE_SYSTEM_IO #define PM1B_EVT_BIT_WIDTH 0x0U #define PM1B_EVT_BIT_OFFSET 0x0U #define PM1B_EVT_ADDRESS 0x0UL #define PM1B_EVT_ACCESS_SIZE 0x2U #define PM1A_CNT_SPACE_ID SPACE_SYSTEM_IO #define PM1A_CNT_BIT_WIDTH 0x10U #define PM1A_CNT_BIT_OFFSET 0x0U #define PM1A_CNT_ADDRESS 0x1804UL #define PM1A_CNT_ACCESS_SIZE 0x2U #define PM1B_CNT_SPACE_ID SPACE_SYSTEM_IO #define PM1B_CNT_BIT_WIDTH 0x0U #define PM1B_CNT_BIT_OFFSET 0x0U #define PM1B_CNT_ADDRESS 0x0UL #define PM1B_CNT_ACCESS_SIZE 0x2U </PM_INFO> <S3_INFO> #define S3_PKG_VAL_PM1A 0x5U #define S3_PKG_VAL_PM1B 0U #define S3_PKG_RESERVED 0x0U </S3_INFO> <S5_INFO> #define S5_PKG_VAL_PM1A 0x7U #define S5_PKG_VAL_PM1B 0U #define S5_PKG_RESERVED 0x0U </S5_INFO> <DRHD_INFO> #define DRHD_COUNT 2U #define DRHD0_DEV_CNT 0x1U #define DRHD0_SEGMENT 0x0U #define DRHD0_FLAGS 0x0U #define DRHD0_REG_BASE 0xFED90000UL #define DRHD0_IGNORE true #define DRHD0_DEVSCOPE0_TYPE 0x1U #define DRHD0_DEVSCOPE0_ID 0x0U #define DRHD0_DEVSCOPE0_BUS 0x0U #define DRHD0_DEVSCOPE0_PATH 0x10U #define DRHD1_DEV_CNT 0x2U #define DRHD1_SEGMENT 0x0U #define DRHD1_FLAGS 0x1U #define DRHD1_REG_BASE 0xFED91000UL #define DRHD1_IGNORE false #define DRHD1_DEVSCOPE0_TYPE 0x3U #define DRHD1_DEVSCOPE0_ID 0x2U #define DRHD1_DEVSCOPE0_BUS 0xf0U #define DRHD1_DEVSCOPE0_PATH 0xf8U #define DRHD1_DEVSCOPE1_TYPE 0x4U #define DRHD1_DEVSCOPE1_ID 0x0U #define DRHD1_DEVSCOPE1_BUS 0x0U #define DRHD1_DEVSCOPE1_PATH 0xf8U </DRHD_INFO> <CPU_BRAND> "Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz" </CPU_BRAND> <CX_INFO> {{SPACE_FFixedHW, 0x00U, 0x00U, 0x00U, 0x00UL}, 0x01U, 0x01U, 0x00U}, / C1 / {{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1816UL}, 0x02U, 0x97U, 0x00U}, / C2 / {{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1819UL}, 0x03U, 0x40AU, 0x00U}, / C3 / </CX_INFO> <PX_INFO> {0xE10UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002400UL, 0x002400UL}, / P0 / {0xD48UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002200UL, 0x002200UL}, / P1 / {0xC80UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002000UL, 0x002000UL}, / P2 / {0xBB8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001E00UL, 0x001E00UL}, / P3 / {0xB54UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001D00UL, 0x001D00UL}, / P4 / {0xA8CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001B00UL, 0x001B00UL}, / P5 / {0x9C4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001900UL, 0x001900UL}, / P6 / {0x8FCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001700UL, 0x001700UL}, / P7 / {0x834UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001500UL, 0x001500UL}, / P8 / {0x76CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001300UL, 0x001300UL}, / P9 / {0x6A4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001100UL, 0x001100UL}, / P10 / {0x5DCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x000F00UL, 0x000F00UL}, / P11 / {0x578UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000E00UL, 0x000E00UL}, / P12 / {0x4B0UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000C00UL, 0x000C00UL}, / P13 / {0x3E8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000A00UL, 0x000A00UL}, / P14 / {0x320UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000800UL, 0x000800UL}, / P15 / </PX_INFO> <CLOS_INFO> clos supported by cache:False clos max:0 </CLOS_INFO> <SYSTEM_RAM_INFO> 00001000-00057fff : System RAM 00059000-0009dfff : System RAM 00100000-3fffffff : System RAM 40400000-ae6bafff : System RAM ae6bd000-b58b7fff : System RAM b6540000-b6549fff : System RAM b6ffe000-b6ffefff : System RAM 100000000-23effffff : System RAM </SYSTEM_RAM_INFO> <BLOCK_DEVICE_INFO> /dev/sda3: TYPE="ext4" /dev/sda4: TYPE="ext4" </BLOCK_DEVICE_INFO> <TTYS_INFO> seri:/dev/ttyS0 type:portio base:0x3F8 irq:4 </TTYS_INFO> <AVAILABLE_IRQ_INFO> 3, 5, 6, 7, 10, 11, 12, 13, 14, 15 </AVAILABLE_IRQ_INFO> <TOTAL_MEM_INFO> 7975552 kB </TOTAL_MEM_INFO> <CPU_PROCESSOR_INFO> 0, 1, 2, 3 </CPU_PROCESSOR_INFO> </acrn-config> sdc.xml <?xml version='1.0' encoding='utf-8'?> <acrn-config board="acer" scenario="sdc"> <vm id="0"> <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order> <name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name> <uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid> <guest_flags desc="Select all applicable flags for the VM" multiselect="true"> <guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag> </guest_flags> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution." /> <memory> <start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa> <size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size> </memory> <os_config> <name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name> <kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type> <kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod> <bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs> </os_config> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id> </vuart> <pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num> <pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs> <board_private> <rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs> <console desc="ttyS console for Linux kernel">/dev/ttyS0</console> <bootargs desc="Specify kernel boot arguments"> rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3 i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1 </bootargs> </board_private> </vm> <vm id="1"> <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order> <uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid> <guest_flags desc="Select all applicable flags for the VM" multiselect="true"> <guest_flag /> </guest_flags> <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU."> <pcpu_id>1</pcpu_id> <pcpu_id>2</pcpu_id> <pcpu_id>3</pcpu_id> </vcpu_affinity> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution." /> <epc_section desc="epc section"> <base desc="SGX EPC section base, must be page aligned">0</base> <size desc="SGX EPC section size in Bytes, must be page aligned">0</size> </epc_section> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." >INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id> </vuart> </vm> <vm configurable="0" desc="specific for Kata" id="2"> <load_order configurable="0" desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM.">POST_LAUNCHED_VM</load_order> <uuid configurable="0" desc="vm uuid">a7ada506-1ab0-4b6b-a0da-e513ca9b8c2f</uuid> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos> <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU."> <pcpu_id>3</pcpu_id> </vcpu_affinity> <epc_section desc="epc section"> <base desc="SGX EPC section base, must be page aligned">0</base> <size desc="SGX EPC section size in Bytes, must be page aligned">0</size> </epc_section> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base configurable="0" desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">COM1_BASE</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base configurable="0" desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">COM2_BASE</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id> </vuart> </vm> </acrn-config> Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails."
More All Messages By This Member
Victor Sun #437 Hi Rajagopal, Please post your UOS launch script. BR, Victor On 11/21/2019 1:41 PM, Rajagopal Aravindan via Lists.Projectacrn.Org wrote: toggle quoted message Show quoted text Hello Victor, W.r.t the subject, we were able to get ACRN to boot into SOS. However, when trying to start UOS we run into the below error GVT: open /sys/kernel/gvt/control/create_gvt_instance failed GVT: init failed : No such file or directory pci pci-gvt init failed I guess its related to graphics virtualization but not able to get past that. Any inputs on this, please ? PFB (my signature) the board & sdc xmls. Thanks, Rajagopal board.xml <acrn-config board="acer"> <BIOS_INFO> BIOS Information Vendor: Acer Version: P21-A1E Release Date: 04/12/2019 BIOS Revision: 5.12 </BIOS_INFO> <BASE_BOARD_INFO> Base Board Information Manufacturer: Acer Product Name: H310CH5-M23 Version: P21-A1E </BASE_BOARD_INFO> <PCI_DEVICE> 00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 08) 00:02.0 VGA compatible controller: Intel Corporation 8th Gen Core Processor Gaussian Mixture Model Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] 00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model Region 0: Memory at df12f000 (64-bit, non-prefetchable) [disabled] [size=4K] 00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller Region 0: Memory at df110000 (64-bit, non-prefetchable) [size=64K] 00:14.2 Signal processing controller: Intel Corporation 200 Series PCH Thermal Subsystem Region 0: Memory at df12e000 (64-bit, non-prefetchable) [size=4K] 00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1 Region 0: Memory at df12d000 (64-bit, non-prefetchable) [size=4K] 00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode] Region 0: Memory at df128000 (32-bit, non-prefetchable) [size=8K] Region 1: Memory at df12c000 (32-bit, non-prefetchable) [size=256] Region 5: Memory at df12b000 (32-bit, non-prefetchable) [size=2K] 00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 (rev f0) 00:1f.0 ISA bridge: Intel Corporation Device a2ca 00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller Region 0: Memory at df124000 (32-bit, non-prefetchable) [disabled] [size=16K] 00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio Region 0: Memory at df120000 (64-bit, non-prefetchable) [size=16K] Region 4: Memory at df100000 (64-bit, non-prefetchable) [size=64K] 00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller Region 0: Memory at df12a000 (64-bit, non-prefetchable) [size=256] 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Region 2: Memory at df004000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at df000000 (64-bit, non-prefetchable) [size=16K] </PCI_DEVICE> <PCI_VID_PID> 00:00.0 0600: 8086:3e1f (rev 08) 00:02.0 0300: 8086:3e91 00:08.0 0880: 8086:1911 00:14.0 0c03: 8086:a2af 00:14.2 1180: 8086:a2b1 00:16.0 0780: 8086:a2ba 00:17.0 0106: 8086:a282 00:1c.0 0604: 8086:a294 (rev f0) 00:1f.0 0601: 8086:a2ca 00:1f.2 0580: 8086:a2a1 00:1f.3 0403: 8086:a2f0 00:1f.4 0c05: 8086:a2a3 01:00.0 0200: 10ec:8168 (rev 15) </PCI_VID_PID> <WAKE_VECTOR_INFO> #define WAKE_VECTOR_32 0xB65B0F0CUL #define WAKE_VECTOR_64 0xB65B0F18UL </WAKE_VECTOR_INFO> <RESET_REGISTER_INFO> #define RESET_REGISTER_ADDRESS 0xCF9UL #define RESET_REGISTER_SPACE_ID SPACE_SYSTEM_IO #define RESET_REGISTER_VALUE 0x6U </RESET_REGISTER_INFO> <PM_INFO> #define PM1A_EVT_SPACE_ID SPACE_SYSTEM_IO #define PM1A_EVT_BIT_WIDTH 0x20U #define PM1A_EVT_BIT_OFFSET 0x0U #define PM1A_EVT_ADDRESS 0x1800UL #define PM1A_EVT_ACCESS_SIZE 0x2U #define PM1B_EVT_SPACE_ID SPACE_SYSTEM_IO #define PM1B_EVT_BIT_WIDTH 0x0U #define PM1B_EVT_BIT_OFFSET 0x0U #define PM1B_EVT_ADDRESS 0x0UL #define PM1B_EVT_ACCESS_SIZE 0x2U #define PM1A_CNT_SPACE_ID SPACE_SYSTEM_IO #define PM1A_CNT_BIT_WIDTH 0x10U #define PM1A_CNT_BIT_OFFSET 0x0U #define PM1A_CNT_ADDRESS 0x1804UL #define PM1A_CNT_ACCESS_SIZE 0x2U #define PM1B_CNT_SPACE_ID SPACE_SYSTEM_IO #define PM1B_CNT_BIT_WIDTH 0x0U #define PM1B_CNT_BIT_OFFSET 0x0U #define PM1B_CNT_ADDRESS 0x0UL #define PM1B_CNT_ACCESS_SIZE 0x2U </PM_INFO> <S3_INFO> #define S3_PKG_VAL_PM1A 0x5U #define S3_PKG_VAL_PM1B 0U #define S3_PKG_RESERVED 0x0U </S3_INFO> <S5_INFO> #define S5_PKG_VAL_PM1A 0x7U #define S5_PKG_VAL_PM1B 0U #define S5_PKG_RESERVED 0x0U </S5_INFO> <DRHD_INFO> #define DRHD_COUNT 2U #define DRHD0_DEV_CNT 0x1U #define DRHD0_SEGMENT 0x0U #define DRHD0_FLAGS 0x0U #define DRHD0_REG_BASE 0xFED90000UL #define DRHD0_IGNORE true #define DRHD0_DEVSCOPE0_TYPE 0x1U #define DRHD0_DEVSCOPE0_ID 0x0U #define DRHD0_DEVSCOPE0_BUS 0x0U #define DRHD0_DEVSCOPE0_PATH 0x10U #define DRHD1_DEV_CNT 0x2U #define DRHD1_SEGMENT 0x0U #define DRHD1_FLAGS 0x1U #define DRHD1_REG_BASE 0xFED91000UL #define DRHD1_IGNORE false #define DRHD1_DEVSCOPE0_TYPE 0x3U #define DRHD1_DEVSCOPE0_ID 0x2U #define DRHD1_DEVSCOPE0_BUS 0xf0U #define DRHD1_DEVSCOPE0_PATH 0xf8U #define DRHD1_DEVSCOPE1_TYPE 0x4U #define DRHD1_DEVSCOPE1_ID 0x0U #define DRHD1_DEVSCOPE1_BUS 0x0U #define DRHD1_DEVSCOPE1_PATH 0xf8U </DRHD_INFO> <CPU_BRAND> "Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz" </CPU_BRAND> <CX_INFO> {{SPACE_FFixedHW, 0x00U, 0x00U, 0x00U, 0x00UL}, 0x01U, 0x01U, 0x00U}, / C1 / {{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1816UL}, 0x02U, 0x97U, 0x00U}, / C2 / {{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1819UL}, 0x03U, 0x40AU, 0x00U}, / C3 / </CX_INFO> <PX_INFO> {0xE10UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002400UL, 0x002400UL}, / P0 / {0xD48UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002200UL, 0x002200UL}, / P1 / {0xC80UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002000UL, 0x002000UL}, / P2 / {0xBB8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001E00UL, 0x001E00UL}, / P3 / {0xB54UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001D00UL, 0x001D00UL}, / P4 / {0xA8CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001B00UL, 0x001B00UL}, / P5 / {0x9C4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001900UL, 0x001900UL}, / P6 / {0x8FCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001700UL, 0x001700UL}, / P7 / {0x834UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001500UL, 0x001500UL}, / P8 / {0x76CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001300UL, 0x001300UL}, / P9 / {0x6A4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001100UL, 0x001100UL}, / P10 / {0x5DCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x000F00UL, 0x000F00UL}, / P11 / {0x578UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000E00UL, 0x000E00UL}, / P12 / {0x4B0UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000C00UL, 0x000C00UL}, / P13 / {0x3E8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000A00UL, 0x000A00UL}, / P14 / {0x320UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000800UL, 0x000800UL}, / P15 / </PX_INFO> <CLOS_INFO> clos supported by cache:False clos max:0 </CLOS_INFO> <SYSTEM_RAM_INFO> 00001000-00057fff : System RAM 00059000-0009dfff : System RAM 00100000-3fffffff : System RAM 40400000-ae6bafff : System RAM ae6bd000-b58b7fff : System RAM b6540000-b6549fff : System RAM b6ffe000-b6ffefff : System RAM 100000000-23effffff : System RAM </SYSTEM_RAM_INFO> <BLOCK_DEVICE_INFO> /dev/sda3: TYPE="ext4" /dev/sda4: TYPE="ext4" </BLOCK_DEVICE_INFO> <TTYS_INFO> seri:/dev/ttyS0 type:portio base:0x3F8 irq:4 </TTYS_INFO> <AVAILABLE_IRQ_INFO> 3, 5, 6, 7, 10, 11, 12, 13, 14, 15 </AVAILABLE_IRQ_INFO> <TOTAL_MEM_INFO> 7975552 kB </TOTAL_MEM_INFO> <CPU_PROCESSOR_INFO> 0, 1, 2, 3 </CPU_PROCESSOR_INFO> </acrn-config> sdc.xml <?xml version='1.0' encoding='utf-8'?> <acrn-config board="acer" scenario="sdc"> <vm id="0"> <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order> <name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name> <uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid> <guest_flags desc="Select all applicable flags for the VM" multiselect="true"> <guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag> </guest_flags> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution." /> <memory> <start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa> <size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size> </memory> <os_config> <name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name> <kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type> <kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod> <bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs> </os_config> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id> </vuart> <pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num> <pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs> <board_private> <rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs> <console desc="ttyS console for Linux kernel">/dev/ttyS0</console> <bootargs desc="Specify kernel boot arguments"> rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3 i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1 </bootargs> </board_private> </vm> <vm id="1"> <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order> <uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid> <guest_flags desc="Select all applicable flags for the VM" multiselect="true"> <guest_flag /> </guest_flags> <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU."> <pcpu_id>1</pcpu_id> <pcpu_id>2</pcpu_id> <pcpu_id>3</pcpu_id> </vcpu_affinity> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution." /> <epc_section desc="epc section"> <base desc="SGX EPC section base, must be page aligned">0</base> <size desc="SGX EPC section size in Bytes, must be page aligned">0</size> </epc_section> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." >INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id> </vuart> </vm> <vm configurable="0" desc="specific for Kata" id="2"> <load_order configurable="0" desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM.">POST_LAUNCHED_VM</load_order> <uuid configurable="0" desc="vm uuid">a7ada506-1ab0-4b6b-a0da-e513ca9b8c2f</uuid> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos> <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU."> <pcpu_id>3</pcpu_id> </vcpu_affinity> <epc_section desc="epc section"> <base desc="SGX EPC section base, must be page aligned">0</base> <size desc="SGX EPC section size in Bytes, must be page aligned">0</size> </epc_section> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base configurable="0" desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">COM1_BASE</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base configurable="0" desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">COM2_BASE</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id> </vuart> </vm> </acrn-config> Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails."
More All Messages By This Member
Rajagopal Aravindan #438 Hello Victor, >>Please post your UOS launch script. PFB, my signature. Thanks, Rajagopal UOS launch script #!/bin/bash # Copyright (C) 2019 Intel Corporation. # SPDX-License-Identifier: BSD-3-Clause offline_path="/sys/class/vhm/acrn_vhm" # Check the device file of /dev/acrn_hsm to determine the offline_path if [ -e "/dev/acrn_hsm" ]; then offline_path="/sys/class/acrn/acrn_hsm" fi function run_container() { vm_name=vm1 config_src="/usr/share/acrn/samples/nuc/runC.json" shell="/usr/share/acrn/conf/add/$vm_name.sh" arg_file="/usr/share/acrn/conf/add/$vm_name.args" runc_bundle="/usr/share/acrn/conf/add/runc/$vm_name" rootfs_dir="/usr/share/acrn/conf/add/runc/rootfs" config_dst="$runc_bundle/config.json" input=$(runc list -f table \| awk '{print $1}''{print $3}') arr=(${input// / }) for((i=0;i<${#arr[@]};i++)) do if [ "$vm_name" = "${arr[$i]}" ]; then if [ "running" = "${arr[$i+1]}" ]; then echo "runC instance ${arr[$i]} is running" exit else runc kill ${arr[$i]} runc delete ${arr[$i]} fi fi done vmsts=$(acrnctl list) vms=(${vmsts// / }) for((i=0;i<${#vms[@]};i++)) do if [ "$vm_name" = "${vms[$i]}" ]; then if [ "stopped" != "${vms[$i+1]}" ]; then echo "Uos ${vms[$i]} ${vms[$i+1]}" acrnctl stop ${vms[$i]} fi fi done if [ ! -f "$shell" ]; then echo "Pls add the vm at first!" exit fi if [ ! -f "$arg_file" ]; then echo "Pls add the vm args!" exit fi if [ ! -d "$rootfs_dir" ]; then mkdir -p "$rootfs_dir" fi if [ ! -d "$runc_bundle" ]; then mkdir -p "$runc_bundle" fi if [ ! -f "$config_dst" ]; then cp "$config_src" "$config_dst" args=$(sed '{s/-C//g;s/^[ \t]//g;s/^/\"/;s/ /\",\"/g;s/$/\"/}' ${arg_file})* sed -i "s\|\"sh\"\|\"$shell\", $args\|" $config_dst fi runc run --bundle $runc_bundle -d $vm_name echo "The runC container is running in backgroud" echo "'#runc exec <vmname> bash' to login the container bash" exit } function launch_clear() { mac=$(cat /sys/class/net/e/address)* vm_name=vm$1 mac_seed=${mac:9:8}-${vm_name} #check if the vm is running or not vm_ps=$(pgrep -a -f acrn-dm) result=$(echo $vm_ps \| grep -w "${vm_name}") if [[ "$result" != "" ]]; then echo "$vm_name is running, can't create twice!" exit fi #logger_setting, format: logger_name,level; like following logger_setting="--logger_setting console,level=4;kmsg,level=3;disk,level=5" #for pm by vuart setting pm_channel="--pm_notify_channel uart " pm_by_vuart="--pm_by_vuart pty,/run/acrn/life_mngr_"$vm_name pm_vuart_node=" -s 1:0,lpc -l com2,/run/acrn/life_mngr_"$vm_name #for memsize setting mem_size=2048M acrn-dm -A -m $mem_size -s 0:0,hostbridge \ -s 2,pci-gvt -G "$2" \ -s 5,virtio-console,@stdio:stdio_port \ -s 6,virtio-hyper_dmabuf \ -s 3,virtio-blk,/home/ghost/acrn_new/uos/clear-26440-kvm.img \ -k /lib/modules/kernel/default-iot-lts2018 \ -s 4,virtio-net,tap0 \ -s 7,virtio-rnd \ --ovmf /usr/share/acrn/bios/OVMF.fd \ $pm_channel $pm_by_vuart $pm_vuart_node \ $logger_setting \ --mac_seed $mac_seed \ $vm_name } #add following cmdline to grub.cfg and update kernel #when launching LaaG by OVMF #rw rootwait maxcpus=1 nohpet console=tty0 console=hvc0 #console=ttyS0 no_timer_check ignore_loglevel #log_buf_len=16M consoleblank=0 #tsc=reliable i915.avail_planes_per_pipe="64 448 8" #i915.enable_hangcheck=0 i915.nuclear_pageflip=1 #i915.enable_guc_loading=0 #i915.enable_guc_submission=0 i915.enable_guc=0 # offline SOS CPUs except BSP before launch UOS for i in `ls -d /sys/devices/system/cpu/cpu[1-99]`; do online=`cat $i/online` idx=`echo $i \| tr -cd "[1-99]"` echo cpu$idx online=$online if [ "$online" = "1" ]; then echo 0 > $i/online # during boot time, cpu hotplug may be disabled by pci_device_probe during a pci module insmod while [ "$online" = "1" ]; do sleep 1 echo 0 > $i/online online=`cat $i/online` done echo $idx > ${offline_path}/offline_cpu fi done if [ "$1" = "-C" ];then echo "runc_container" run_container else launch_clear 1 "64 448 8" 0x070F00 fi toggle quoted message Show quoted text From: acrn-users@... <acrn-users@...> on behalf of Victor Sun <victor.sun@...> Sent: Thursday, November 21, 2019 11:18 AM To: acrn-users@... <acrn-users@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hi Rajagopal, Please post your UOS launch script. BR, Victor On 11/21/2019 1:41 PM, Rajagopal Aravindan via Lists.Projectacrn.Org wrote: Hello Victor, W.r.t the subject, we were able to get ACRN to boot into SOS. However, when trying to start UOS we run into the below error GVT: open /sys/kernel/gvt/control/create_gvt_instance failed GVT: init failed : No such file or directory pci pci-gvt init failed I guess its related to graphics virtualization but not able to get past that. Any inputs on this, please ? PFB (my signature) the board & sdc xmls. Thanks, Rajagopal board.xml <acrn-config board="acer"> <BIOS_INFO> BIOS Information Vendor: Acer Version: P21-A1E Release Date: 04/12/2019 BIOS Revision: 5.12 </BIOS_INFO> <BASE_BOARD_INFO> Base Board Information Manufacturer: Acer Product Name: H310CH5-M23 Version: P21-A1E </BASE_BOARD_INFO> <PCI_DEVICE> 00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 08) 00:02.0 VGA compatible controller: Intel Corporation 8th Gen Core Processor Gaussian Mixture Model Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] 00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model Region 0: Memory at df12f000 (64-bit, non-prefetchable) [disabled] [size=4K] 00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller Region 0: Memory at df110000 (64-bit, non-prefetchable) [size=64K] 00:14.2 Signal processing controller: Intel Corporation 200 Series PCH Thermal Subsystem Region 0: Memory at df12e000 (64-bit, non-prefetchable) [size=4K] 00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1 Region 0: Memory at df12d000 (64-bit, non-prefetchable) [size=4K] 00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode] Region 0: Memory at df128000 (32-bit, non-prefetchable) [size=8K] Region 1: Memory at df12c000 (32-bit, non-prefetchable) [size=256] Region 5: Memory at df12b000 (32-bit, non-prefetchable) [size=2K] 00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 (rev f0) 00:1f.0 ISA bridge: Intel Corporation Device a2ca 00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller Region 0: Memory at df124000 (32-bit, non-prefetchable) [disabled] [size=16K] 00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio Region 0: Memory at df120000 (64-bit, non-prefetchable) [size=16K] Region 4: Memory at df100000 (64-bit, non-prefetchable) [size=64K] 00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller Region 0: Memory at df12a000 (64-bit, non-prefetchable) [size=256] 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Region 2: Memory at df004000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at df000000 (64-bit, non-prefetchable) [size=16K] </PCI_DEVICE> <PCI_VID_PID> 00:00.0 0600: 8086:3e1f (rev 08) 00:02.0 0300: 8086:3e91 00:08.0 0880: 8086:1911 00:14.0 0c03: 8086:a2af 00:14.2 1180: 8086:a2b1 00:16.0 0780: 8086:a2ba 00:17.0 0106: 8086:a282 00:1c.0 0604: 8086:a294 (rev f0) 00:1f.0 0601: 8086:a2ca 00:1f.2 0580: 8086:a2a1 00:1f.3 0403: 8086:a2f0 00:1f.4 0c05: 8086:a2a3 01:00.0 0200: 10ec:8168 (rev 15) </PCI_VID_PID> <WAKE_VECTOR_INFO> #define WAKE_VECTOR_32 0xB65B0F0CUL #define WAKE_VECTOR_64 0xB65B0F18UL </WAKE_VECTOR_INFO> <RESET_REGISTER_INFO> #define RESET_REGISTER_ADDRESS 0xCF9UL #define RESET_REGISTER_SPACE_ID SPACE_SYSTEM_IO #define RESET_REGISTER_VALUE 0x6U </RESET_REGISTER_INFO> <PM_INFO> #define PM1A_EVT_SPACE_ID SPACE_SYSTEM_IO #define PM1A_EVT_BIT_WIDTH 0x20U #define PM1A_EVT_BIT_OFFSET 0x0U #define PM1A_EVT_ADDRESS 0x1800UL #define PM1A_EVT_ACCESS_SIZE 0x2U #define PM1B_EVT_SPACE_ID SPACE_SYSTEM_IO #define PM1B_EVT_BIT_WIDTH 0x0U #define PM1B_EVT_BIT_OFFSET 0x0U #define PM1B_EVT_ADDRESS 0x0UL #define PM1B_EVT_ACCESS_SIZE 0x2U #define PM1A_CNT_SPACE_ID SPACE_SYSTEM_IO #define PM1A_CNT_BIT_WIDTH 0x10U #define PM1A_CNT_BIT_OFFSET 0x0U #define PM1A_CNT_ADDRESS 0x1804UL #define PM1A_CNT_ACCESS_SIZE 0x2U #define PM1B_CNT_SPACE_ID SPACE_SYSTEM_IO #define PM1B_CNT_BIT_WIDTH 0x0U #define PM1B_CNT_BIT_OFFSET 0x0U #define PM1B_CNT_ADDRESS 0x0UL #define PM1B_CNT_ACCESS_SIZE 0x2U </PM_INFO> <S3_INFO> #define S3_PKG_VAL_PM1A 0x5U #define S3_PKG_VAL_PM1B 0U #define S3_PKG_RESERVED 0x0U </S3_INFO> <S5_INFO> #define S5_PKG_VAL_PM1A 0x7U #define S5_PKG_VAL_PM1B 0U #define S5_PKG_RESERVED 0x0U </S5_INFO> <DRHD_INFO> #define DRHD_COUNT 2U #define DRHD0_DEV_CNT 0x1U #define DRHD0_SEGMENT 0x0U #define DRHD0_FLAGS 0x0U #define DRHD0_REG_BASE 0xFED90000UL #define DRHD0_IGNORE true #define DRHD0_DEVSCOPE0_TYPE 0x1U #define DRHD0_DEVSCOPE0_ID 0x0U #define DRHD0_DEVSCOPE0_BUS 0x0U #define DRHD0_DEVSCOPE0_PATH 0x10U #define DRHD1_DEV_CNT 0x2U #define DRHD1_SEGMENT 0x0U #define DRHD1_FLAGS 0x1U #define DRHD1_REG_BASE 0xFED91000UL #define DRHD1_IGNORE false #define DRHD1_DEVSCOPE0_TYPE 0x3U #define DRHD1_DEVSCOPE0_ID 0x2U #define DRHD1_DEVSCOPE0_BUS 0xf0U #define DRHD1_DEVSCOPE0_PATH 0xf8U #define DRHD1_DEVSCOPE1_TYPE 0x4U #define DRHD1_DEVSCOPE1_ID 0x0U #define DRHD1_DEVSCOPE1_BUS 0x0U #define DRHD1_DEVSCOPE1_PATH 0xf8U </DRHD_INFO> <CPU_BRAND> "Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz" </CPU_BRAND> <CX_INFO> {{SPACE_FFixedHW, 0x00U, 0x00U, 0x00U, 0x00UL}, 0x01U, 0x01U, 0x00U}, / C1 / {{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1816UL}, 0x02U, 0x97U, 0x00U}, / C2 / {{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1819UL}, 0x03U, 0x40AU, 0x00U}, / C3 / </CX_INFO> <PX_INFO> {0xE10UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002400UL, 0x002400UL}, / P0 / {0xD48UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002200UL, 0x002200UL}, / P1 / {0xC80UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002000UL, 0x002000UL}, / P2 / {0xBB8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001E00UL, 0x001E00UL}, / P3 / {0xB54UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001D00UL, 0x001D00UL}, / P4 / {0xA8CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001B00UL, 0x001B00UL}, / P5 / {0x9C4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001900UL, 0x001900UL}, / P6 / {0x8FCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001700UL, 0x001700UL}, / P7 / {0x834UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001500UL, 0x001500UL}, / P8 / {0x76CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001300UL, 0x001300UL}, / P9 / {0x6A4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001100UL, 0x001100UL}, / P10 / {0x5DCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x000F00UL, 0x000F00UL}, / P11 / {0x578UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000E00UL, 0x000E00UL}, / P12 / {0x4B0UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000C00UL, 0x000C00UL}, / P13 / {0x3E8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000A00UL, 0x000A00UL}, / P14 / {0x320UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000800UL, 0x000800UL}, / P15 / </PX_INFO> <CLOS_INFO> clos supported by cache:False clos max:0 </CLOS_INFO> <SYSTEM_RAM_INFO> 00001000-00057fff : System RAM 00059000-0009dfff : System RAM 00100000-3fffffff : System RAM 40400000-ae6bafff : System RAM ae6bd000-b58b7fff : System RAM b6540000-b6549fff : System RAM b6ffe000-b6ffefff : System RAM 100000000-23effffff : System RAM </SYSTEM_RAM_INFO> <BLOCK_DEVICE_INFO> /dev/sda3: TYPE="ext4" /dev/sda4: TYPE="ext4" </BLOCK_DEVICE_INFO> <TTYS_INFO> seri:/dev/ttyS0 type:portio base:0x3F8 irq:4 </TTYS_INFO> <AVAILABLE_IRQ_INFO> 3, 5, 6, 7, 10, 11, 12, 13, 14, 15 </AVAILABLE_IRQ_INFO> <TOTAL_MEM_INFO> 7975552 kB </TOTAL_MEM_INFO> <CPU_PROCESSOR_INFO> 0, 1, 2, 3 </CPU_PROCESSOR_INFO> </acrn-config> sdc.xml <?xml version='1.0' encoding='utf-8'?> <acrn-config board="acer" scenario="sdc"> <vm id="0"> <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order> <name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name> <uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid> <guest_flags desc="Select all applicable flags for the VM" multiselect="true"> <guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag> </guest_flags> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution." /> <memory> <start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa> <size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size> </memory> <os_config> <name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name> <kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type> <kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod> <bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs> </os_config> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id> </vuart> <pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num> <pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs> <board_private> <rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs> <console desc="ttyS console for Linux kernel">/dev/ttyS0</console> <bootargs desc="Specify kernel boot arguments"> rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3 i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1 </bootargs> </board_private> </vm> <vm id="1"> <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order> <uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid> <guest_flags desc="Select all applicable flags for the VM" multiselect="true"> <guest_flag /> </guest_flags> <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU."> <pcpu_id>1</pcpu_id> <pcpu_id>2</pcpu_id> <pcpu_id>3</pcpu_id> </vcpu_affinity> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution." /> <epc_section desc="epc section"> <base desc="SGX EPC section base, must be page aligned">0</base> <size desc="SGX EPC section size in Bytes, must be page aligned">0</size> </epc_section> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." >INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id> </vuart> </vm> <vm configurable="0" desc="specific for Kata" id="2"> <load_order configurable="0" desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM.">POST_LAUNCHED_VM</load_order> <uuid configurable="0" desc="vm uuid">a7ada506-1ab0-4b6b-a0da-e513ca9b8c2f</uuid> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos> <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU."> <pcpu_id>3</pcpu_id> </vcpu_affinity> <epc_section desc="epc section"> <base desc="SGX EPC section base, must be page aligned">0</base> <size desc="SGX EPC section size in Bytes, must be page aligned">0</size> </epc_section> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base configurable="0" desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">COM1_BASE</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base configurable="0" desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">COM2_BASE</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id> </vuart> </vm> </acrn-config> Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails." Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails."
More All Messages By This Member
Liu, Fuzhong #439 Hi Rajagopal Is GVT-g patches included in your SOS kernel? Could you please share the SOS kernel version you used? Anyway, please remove -s 2,pci-gvt -G "$2" \ in your script; and have a try. If the issue is still there, please run following cmd in sos: acrn-dm -v /usr/sbin/iasl -v Thanks! BR. Fuzhong toggle quoted message Show quoted text From: acrn-users@... <acrn-users@...> On Behalf Of Rajagopal Aravindan via Lists.Projectacrn.Org Sent: Thursday, November 21, 2019 3:40 PM To: Sun, Victor <victor.sun@...>; acrn-users@... Subject: Re: [acrn-users] ACRN on CoffeeLake Hello Victor, >>Please post your UOS launch script. PFB, my signature. Thanks, Rajagopal UOS launch script #!/bin/bash # Copyright (C) 2019 Intel Corporation. # SPDX-License-Identifier: BSD-3-Clause offline_path="/sys/class/vhm/acrn_vhm" # Check the device file of /dev/acrn_hsm to determine the offline_path if [ -e "/dev/acrn_hsm" ]; then offline_path="/sys/class/acrn/acrn_hsm" fi function run_container() { vm_name=vm1 config_src="/usr/share/acrn/samples/nuc/runC.json" shell="/usr/share/acrn/conf/add/$vm_name.sh" arg_file="/usr/share/acrn/conf/add/$vm_name.args" runc_bundle="/usr/share/acrn/conf/add/runc/$vm_name" rootfs_dir="/usr/share/acrn/conf/add/runc/rootfs" config_dst="$runc_bundle/config.json" input=$(runc list -f table \| awk '{print $1}''{print $3}') arr=(${input// / }) for((i=0;i<${#arr[@]};i++)) do if [ "$vm_name" = "${arr[$i]}" ]; then if [ "running" = "${arr[$i+1]}" ]; then echo "runC instance ${arr[$i]} is running" exit else runc kill ${arr[$i]} runc delete ${arr[$i]} fi fi done vmsts=$(acrnctl list) vms=(${vmsts// / }) for((i=0;i<${#vms[@]};i++)) do if [ "$vm_name" = "${vms[$i]}" ]; then if [ "stopped" != "${vms[$i+1]}" ]; then echo "Uos ${vms[$i]} ${vms[$i+1]}" acrnctl stop ${vms[$i]} fi fi done if [ ! -f "$shell" ]; then echo "Pls add the vm at first!" exit fi if [ ! -f "$arg_file" ]; then echo "Pls add the vm args!" exit fi if [ ! -d "$rootfs_dir" ]; then mkdir -p "$rootfs_dir" fi if [ ! -d "$runc_bundle" ]; then mkdir -p "$runc_bundle" fi if [ ! -f "$config_dst" ]; then cp "$config_src" "$config_dst" args=$(sed '{s/-C//g;s/^[ \t]//g;s/^/\"/;s/ /\",\"/g;s/$/\"/}' ${arg_file})* sed -i "s\|\"sh\"\|\"$shell\", $args\|" $config_dst fi runc run --bundle $runc_bundle -d $vm_name echo "The runC container is running in backgroud" echo "'#runc exec <vmname> bash' to login the container bash" exit } function launch_clear() { mac=$(cat /sys/class/net/e/address)* vm_name=vm$1 mac_seed=${mac:9:8}-${vm_name} #check if the vm is running or not vm_ps=$(pgrep -a -f acrn-dm) result=$(echo $vm_ps \| grep -w "${vm_name}") if [[ "$result" != "" ]]; then echo "$vm_name is running, can't create twice!" exit fi #logger_setting, format: logger_name,level; like following logger_setting="--logger_setting console,level=4;kmsg,level=3;disk,level=5" #for pm by vuart setting pm_channel="--pm_notify_channel uart " pm_by_vuart="--pm_by_vuart pty,/run/acrn/life_mngr_"$vm_name pm_vuart_node=" -s 1:0,lpc -l com2,/run/acrn/life_mngr_"$vm_name #for memsize setting mem_size=2048M acrn-dm -A -m $mem_size -s 0:0,hostbridge \ -s 2,pci-gvt -G "$2" \ -s 5,virtio-console,@stdio:stdio_port \ -s 6,virtio-hyper_dmabuf \ -s 3,virtio-blk,/home/ghost/acrn_new/uos/clear-26440-kvm.img \ -k /lib/modules/kernel/default-iot-lts2018 \ -s 4,virtio-net,tap0 \ -s 7,virtio-rnd \ --ovmf /usr/share/acrn/bios/OVMF.fd \ $pm_channel $pm_by_vuart $pm_vuart_node \ $logger_setting \ --mac_seed $mac_seed \ $vm_name } #add following cmdline to grub.cfg and update kernel #when launching LaaG by OVMF #rw rootwait maxcpus=1 nohpet console=tty0 console=hvc0 #console=ttyS0 no_timer_check ignore_loglevel #log_buf_len=16M consoleblank=0 #tsc=reliable i915.avail_planes_per_pipe="64 448 8" #i915.enable_hangcheck=0 i915.nuclear_pageflip=1 #i915.enable_guc_loading=0 #i915.enable_guc_submission=0 i915.enable_guc=0 # offline SOS CPUs except BSP before launch UOS for i in `ls -d /sys/devices/system/cpu/cpu[1-99]`; do online=`cat $i/online` idx=`echo $i \| tr -cd "[1-99]"` echo cpu$idx online=$online if [ "$online" = "1" ]; then echo 0 > $i/online # during boot time, cpu hotplug may be disabled by pci_device_probe during a pci module insmod while [ "$online" = "1" ]; do sleep 1 echo 0 > $i/online online=`cat $i/online` done echo $idx > ${offline_path}/offline_cpu fi done if [ "$1" = "-C" ];then echo "runc_container" run_container else launch_clear 1 "64 448 8" 0x070F00 fi From: acrn-users@... <acrn-users@...> on behalf of Victor Sun <victor.sun@...> Sent: Thursday, November 21, 2019 11:18 AM To: acrn-users@... <acrn-users@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hi Rajagopal, Please post your UOS launch script. BR, Victor On 11/21/2019 1:41 PM, Rajagopal Aravindan via Lists.Projectacrn.Org wrote: Hello Victor, W.r.t the subject, we were able to get ACRN to boot into SOS. However, when trying to start UOS we run into the below error GVT: open /sys/kernel/gvt/control/create_gvt_instance failed GVT: init failed : No such file or directory pci pci-gvt init failed I guess its related to graphics virtualization but not able to get past that. Any inputs on this, please ? PFB (my signature) the board & sdc xmls. Thanks, Rajagopal board.xml <acrn-config board="acer"> <BIOS_INFO> BIOS Information Vendor: Acer Version: P21-A1E Release Date: 04/12/2019 BIOS Revision: 5.12 </BIOS_INFO> <BASE_BOARD_INFO> Base Board Information Manufacturer: Acer Product Name: H310CH5-M23 Version: P21-A1E </BASE_BOARD_INFO> <PCI_DEVICE> 00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 08) 00:02.0 VGA compatible controller: Intel Corporation 8th Gen Core Processor Gaussian Mixture Model Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] 00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model Region 0: Memory at df12f000 (64-bit, non-prefetchable) [disabled] [size=4K] 00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller Region 0: Memory at df110000 (64-bit, non-prefetchable) [size=64K] 00:14.2 Signal processing controller: Intel Corporation 200 Series PCH Thermal Subsystem Region 0: Memory at df12e000 (64-bit, non-prefetchable) [size=4K] 00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1 Region 0: Memory at df12d000 (64-bit, non-prefetchable) [size=4K] 00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode] Region 0: Memory at df128000 (32-bit, non-prefetchable) [size=8K] Region 1: Memory at df12c000 (32-bit, non-prefetchable) [size=256] Region 5: Memory at df12b000 (32-bit, non-prefetchable) [size=2K] 00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 (rev f0) 00:1f.0 ISA bridge: Intel Corporation Device a2ca 00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller Region 0: Memory at df124000 (32-bit, non-prefetchable) [disabled] [size=16K] 00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio Region 0: Memory at df120000 (64-bit, non-prefetchable) [size=16K] Region 4: Memory at df100000 (64-bit, non-prefetchable) [size=64K] 00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller Region 0: Memory at df12a000 (64-bit, non-prefetchable) [size=256] 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Region 2: Memory at df004000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at df000000 (64-bit, non-prefetchable) [size=16K] </PCI_DEVICE> <PCI_VID_PID> 00:00.0 0600: 8086:3e1f (rev 08) 00:02.0 0300: 8086:3e91 00:08.0 0880: 8086:1911 00:14.0 0c03: 8086:a2af 00:14.2 1180: 8086:a2b1 00:16.0 0780: 8086:a2ba 00:17.0 0106: 8086:a282 00:1c.0 0604: 8086:a294 (rev f0) 00:1f.0 0601: 8086:a2ca 00:1f.2 0580: 8086:a2a1 00:1f.3 0403: 8086:a2f0 00:1f.4 0c05: 8086:a2a3 01:00.0 0200: 10ec:8168 (rev 15) </PCI_VID_PID> <WAKE_VECTOR_INFO> #define WAKE_VECTOR_32 0xB65B0F0CUL #define WAKE_VECTOR_64 0xB65B0F18UL </WAKE_VECTOR_INFO> <RESET_REGISTER_INFO> #define RESET_REGISTER_ADDRESS 0xCF9UL #define RESET_REGISTER_SPACE_ID SPACE_SYSTEM_IO #define RESET_REGISTER_VALUE 0x6U </RESET_REGISTER_INFO> <PM_INFO> #define PM1A_EVT_SPACE_ID SPACE_SYSTEM_IO #define PM1A_EVT_BIT_WIDTH 0x20U #define PM1A_EVT_BIT_OFFSET 0x0U #define PM1A_EVT_ADDRESS 0x1800UL #define PM1A_EVT_ACCESS_SIZE 0x2U #define PM1B_EVT_SPACE_ID SPACE_SYSTEM_IO #define PM1B_EVT_BIT_WIDTH 0x0U #define PM1B_EVT_BIT_OFFSET 0x0U #define PM1B_EVT_ADDRESS 0x0UL #define PM1B_EVT_ACCESS_SIZE 0x2U #define PM1A_CNT_SPACE_ID SPACE_SYSTEM_IO #define PM1A_CNT_BIT_WIDTH 0x10U #define PM1A_CNT_BIT_OFFSET 0x0U #define PM1A_CNT_ADDRESS 0x1804UL #define PM1A_CNT_ACCESS_SIZE 0x2U #define PM1B_CNT_SPACE_ID SPACE_SYSTEM_IO #define PM1B_CNT_BIT_WIDTH 0x0U #define PM1B_CNT_BIT_OFFSET 0x0U #define PM1B_CNT_ADDRESS 0x0UL #define PM1B_CNT_ACCESS_SIZE 0x2U </PM_INFO> <S3_INFO> #define S3_PKG_VAL_PM1A 0x5U #define S3_PKG_VAL_PM1B 0U #define S3_PKG_RESERVED 0x0U </S3_INFO> <S5_INFO> #define S5_PKG_VAL_PM1A 0x7U #define S5_PKG_VAL_PM1B 0U #define S5_PKG_RESERVED 0x0U </S5_INFO> <DRHD_INFO> #define DRHD_COUNT 2U #define DRHD0_DEV_CNT 0x1U #define DRHD0_SEGMENT 0x0U #define DRHD0_FLAGS 0x0U #define DRHD0_REG_BASE 0xFED90000UL #define DRHD0_IGNORE true #define DRHD0_DEVSCOPE0_TYPE 0x1U #define DRHD0_DEVSCOPE0_ID 0x0U #define DRHD0_DEVSCOPE0_BUS 0x0U #define DRHD0_DEVSCOPE0_PATH 0x10U #define DRHD1_DEV_CNT 0x2U #define DRHD1_SEGMENT 0x0U #define DRHD1_FLAGS 0x1U #define DRHD1_REG_BASE 0xFED91000UL #define DRHD1_IGNORE false #define DRHD1_DEVSCOPE0_TYPE 0x3U #define DRHD1_DEVSCOPE0_ID 0x2U #define DRHD1_DEVSCOPE0_BUS 0xf0U #define DRHD1_DEVSCOPE0_PATH 0xf8U #define DRHD1_DEVSCOPE1_TYPE 0x4U #define DRHD1_DEVSCOPE1_ID 0x0U #define DRHD1_DEVSCOPE1_BUS 0x0U #define DRHD1_DEVSCOPE1_PATH 0xf8U </DRHD_INFO> <CPU_BRAND> "Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz" </CPU_BRAND> <CX_INFO> {{SPACE_FFixedHW, 0x00U, 0x00U, 0x00U, 0x00UL}, 0x01U, 0x01U, 0x00U}, / C1 / {{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1816UL}, 0x02U, 0x97U, 0x00U}, / C2 / {{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1819UL}, 0x03U, 0x40AU, 0x00U}, / C3 / </CX_INFO> <PX_INFO> {0xE10UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002400UL, 0x002400UL}, / P0 / {0xD48UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002200UL, 0x002200UL}, / P1 / {0xC80UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002000UL, 0x002000UL}, / P2 / {0xBB8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001E00UL, 0x001E00UL}, / P3 / {0xB54UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001D00UL, 0x001D00UL}, / P4 / {0xA8CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001B00UL, 0x001B00UL}, / P5 / {0x9C4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001900UL, 0x001900UL}, / P6 / {0x8FCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001700UL, 0x001700UL}, / P7 / {0x834UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001500UL, 0x001500UL}, / P8 / {0x76CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001300UL, 0x001300UL}, / P9 / {0x6A4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001100UL, 0x001100UL}, / P10 / {0x5DCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x000F00UL, 0x000F00UL}, / P11 / {0x578UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000E00UL, 0x000E00UL}, / P12 / {0x4B0UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000C00UL, 0x000C00UL}, / P13 / {0x3E8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000A00UL, 0x000A00UL}, / P14 / {0x320UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000800UL, 0x000800UL}, / P15 / </PX_INFO> <CLOS_INFO> clos supported by cache:False clos max:0 </CLOS_INFO> <SYSTEM_RAM_INFO> 00001000-00057fff : System RAM 00059000-0009dfff : System RAM 00100000-3fffffff : System RAM 40400000-ae6bafff : System RAM ae6bd000-b58b7fff : System RAM b6540000-b6549fff : System RAM b6ffe000-b6ffefff : System RAM 100000000-23effffff : System RAM </SYSTEM_RAM_INFO> <BLOCK_DEVICE_INFO> /dev/sda3: TYPE="ext4" /dev/sda4: TYPE="ext4" </BLOCK_DEVICE_INFO> <TTYS_INFO> seri:/dev/ttyS0 type:portio base:0x3F8 irq:4 </TTYS_INFO> <AVAILABLE_IRQ_INFO> 3, 5, 6, 7, 10, 11, 12, 13, 14, 15 </AVAILABLE_IRQ_INFO> <TOTAL_MEM_INFO> 7975552 kB </TOTAL_MEM_INFO> <CPU_PROCESSOR_INFO> 0, 1, 2, 3 </CPU_PROCESSOR_INFO> </acrn-config> sdc.xml <?xml version='1.0' encoding='utf-8'?> <acrn-config board="acer" scenario="sdc"> <vm id="0"> <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order> <name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name> <uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid> <guest_flags desc="Select all applicable flags for the VM" multiselect="true"> <guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag> </guest_flags> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution." /> <memory> <start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa> <size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size> </memory> <os_config> <name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name> <kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type> <kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod> <bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs> </os_config> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id> </vuart> <pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num> <pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs> <board_private> <rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs> <console desc="ttyS console for Linux kernel">/dev/ttyS0</console> <bootargs desc="Specify kernel boot arguments"> rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3 i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1 </bootargs> </board_private> </vm> <vm id="1"> <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order> <uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid> <guest_flags desc="Select all applicable flags for the VM" multiselect="true"> <guest_flag /> </guest_flags> <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU."> <pcpu_id>1</pcpu_id> <pcpu_id>2</pcpu_id> <pcpu_id>3</pcpu_id> </vcpu_affinity> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution." /> <epc_section desc="epc section"> <base desc="SGX EPC section base, must be page aligned">0</base> <size desc="SGX EPC section size in Bytes, must be page aligned">0</size> </epc_section> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." >INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id> </vuart> </vm> <vm configurable="0" desc="specific for Kata" id="2"> <load_order configurable="0" desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM.">POST_LAUNCHED_VM</load_order> <uuid configurable="0" desc="vm uuid">a7ada506-1ab0-4b6b-a0da-e513ca9b8c2f</uuid> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos> <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU."> <pcpu_id>3</pcpu_id> </vcpu_affinity> <epc_section desc="epc section"> <base desc="SGX EPC section base, must be page aligned">0</base> <size desc="SGX EPC section size in Bytes, must be page aligned">0</size> </epc_section> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base configurable="0" desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">COM1_BASE</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base configurable="0" desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">COM2_BASE</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id> </vuart> </vm> </acrn-config> Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails." Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails."
More All Messages By This Member
Rajagopal Aravindan #440 Hello Victor & Fuzhong, Thanks for pitching in Fuzhong. >>Could you please share the SOS kernel version you used? We tried 2 kernels for SOS, as below ... 4.19.0-22.iot-lts2018-sos - ClearLinux's pre-built kernel 4.19.73-PKT-190919T160721Z-00001-g7a3835deba16 - Built from source https://github.com/projectacrn/acrn-kernel/ >>Anyway, please remove -s 2,pci-gvt -G "$2" \ in your script; and have a try. We ran into the error below (my signature). >>acrn-dm -v DM version is: 1.4-unstable-7b0cafa8-dirty (daily tag:acrn-2019w43.5-140000p), build by root@2019-11-20 10:51:28 [ acrn-2019w43.5-140000p is the daily tag which i picked from release page. Not sure why this gives DM version as unstable!! ] >>/usr/sbin/iasl -v Intel ACPI Component Architecture ASL+ Optimizing Compiler/Disassembler version 20180105 Copyright (c) 2000 - 2018 Intel Corporation Thanks, Rajagopal cpu1 online=0 cpu2 online=0 cpu3 online=0 SW_LOAD: get kernel path /lib/modules/kernel/default-iot-lts2018 SW_LOAD: get ovmf path /usr/share/acrn/bios/OVMF.fd, size 0x200000 pm by vuart node-index = 0 logger: name=console, level=4 logger: name=kmsg, level=3 logger: name=disk, level=5 vm_create: vm1 VHM api version 1.0 vm_setup_memory: size=0x80000000 open hugetlbfs file /run/hugepage/acrn/huge_lv1/vm1/D279543825D611E8864ECB7A18B34643 open hugetlbfs file /run/hugepage/acrn/huge_lv2/vm1/D279543825D611E8864ECB7A18B34643 level 0 free/need pages:1/1 page size:0x200000 level 1 free/need pages:2/2 page size:0x40000000 try to setup hugepage with: level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0 level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0 total_size 0x180000000 mmap ptr 0x0x7f25be079000 -> baseaddr 0x0x7f25c0000000 mmap 0x80000000@0x7f25c0000000 touch 2 pages with pagesz 0x40000000 mmap 0x200000@0x7f26bfe00000 touch 1 pages with pagesz 0x200000 really setup hugepage with: level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0 level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0 vm_init_vdevs pci init hostbridge pci init lpc pci init virtio-blk pci init virtio-net pci init virtio-console pci init virtio-hyper_dmabuf pci init virtio-rnd tpm: init_vtpm2:Invalid socket path! polling 38... Listening 38... /tmp/dm.XBeZ4MB 46: [0004] Address : fec00000 Error 6303 - ^ Integer too large for target (00000000FEC00000 - max 1 bytes) /tmp/dm.XBeZ4MB 58: [0001] Subtable Type : 02 Error 6302 - Flag value is too large ^ (Maximum 1 bit) /tmp/dm.XBeZ4MB 62: [0004] Interrupt : 00000009 Error 6302 - Flag value is too large ^ (Maximum 2 bit) /tmp/dm.XBeZ4MB 63: [0002] Flags (decoded below) : 000D Error 6302 - Flag value is too large ^ (Maximum 2 bit) acpi_build failed, error=-1 pci deinit hostbridge pci deinit lpc pci deinit virtio-blk pci deinit virtio-net vtnet tx thread closing... pci deinit virtio-console pci deinit virtio-hyper_dmabuf pci deinit virtio-rnd mngr_client_new: Failed to accept from fd 38, err: Invalid argument Stop listening 38... Stop polling 38... toggle quoted message Show quoted text From: acrn-users@... <acrn-users@...> on behalf of Liu, Fuzhong <fuzhong.liu@...> Sent: Thursday, November 21, 2019 4:13 PM To: acrn-users@... <acrn-users@...>; Sun, Victor <victor.sun@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hi Rajagopal Is GVT-g patches included in your SOS kernel? Could you please share the SOS kernel version you used? Anyway, please remove -s 2,pci-gvt -G "$2" \ in your script; and have a try. If the issue is still there, please run following cmd in sos: acrn-dm -v /usr/sbin/iasl -v Thanks! BR. Fuzhong From: acrn-users@... <acrn-users@...> On Behalf Of Rajagopal Aravindan via Lists.Projectacrn.Org Sent: Thursday, November 21, 2019 3:40 PM To: Sun, Victor <victor.sun@...>; acrn-users@... Subject: Re: [acrn-users] ACRN on CoffeeLake Hello Victor, >>Please post your UOS launch script. PFB, my signature. Thanks, Rajagopal UOS launch script #!/bin/bash # Copyright (C) 2019 Intel Corporation. # SPDX-License-Identifier: BSD-3-Clause offline_path="/sys/class/vhm/acrn_vhm" # Check the device file of /dev/acrn_hsm to determine the offline_path if [ -e "/dev/acrn_hsm" ]; then offline_path="/sys/class/acrn/acrn_hsm" fi function run_container() { vm_name=vm1 config_src="/usr/share/acrn/samples/nuc/runC.json" shell="/usr/share/acrn/conf/add/$vm_name.sh" arg_file="/usr/share/acrn/conf/add/$vm_name.args" runc_bundle="/usr/share/acrn/conf/add/runc/$vm_name" rootfs_dir="/usr/share/acrn/conf/add/runc/rootfs" config_dst="$runc_bundle/config.json" input=$(runc list -f table \| awk '{print $1}''{print $3}') arr=(${input// / }) for((i=0;i<${#arr[@]};i++)) do if [ "$vm_name" = "${arr[$i]}" ]; then if [ "running" = "${arr[$i+1]}" ]; then echo "runC instance ${arr[$i]} is running" exit else runc kill ${arr[$i]} runc delete ${arr[$i]} fi fi done vmsts=$(acrnctl list) vms=(${vmsts// / }) for((i=0;i<${#vms[@]};i++)) do if [ "$vm_name" = "${vms[$i]}" ]; then if [ "stopped" != "${vms[$i+1]}" ]; then echo "Uos ${vms[$i]} ${vms[$i+1]}" acrnctl stop ${vms[$i]} fi fi done if [ ! -f "$shell" ]; then echo "Pls add the vm at first!" exit fi if [ ! -f "$arg_file" ]; then echo "Pls add the vm args!" exit fi if [ ! -d "$rootfs_dir" ]; then mkdir -p "$rootfs_dir" fi if [ ! -d "$runc_bundle" ]; then mkdir -p "$runc_bundle" fi if [ ! -f "$config_dst" ]; then cp "$config_src" "$config_dst" args=$(sed '{s/-C//g;s/^[ \t]//g;s/^/\"/;s/ /\",\"/g;s/$/\"/}' ${arg_file})* sed -i "s\|\"sh\"\|\"$shell\", $args\|" $config_dst fi runc run --bundle $runc_bundle -d $vm_name echo "The runC container is running in backgroud" echo "'#runc exec <vmname> bash' to login the container bash" exit } function launch_clear() { mac=$(cat /sys/class/net/e/address)* vm_name=vm$1 mac_seed=${mac:9:8}-${vm_name} #check if the vm is running or not vm_ps=$(pgrep -a -f acrn-dm) result=$(echo $vm_ps \| grep -w "${vm_name}") if [[ "$result" != "" ]]; then echo "$vm_name is running, can't create twice!" exit fi #logger_setting, format: logger_name,level; like following logger_setting="--logger_setting console,level=4;kmsg,level=3;disk,level=5" #for pm by vuart setting pm_channel="--pm_notify_channel uart " pm_by_vuart="--pm_by_vuart pty,/run/acrn/life_mngr_"$vm_name pm_vuart_node=" -s 1:0,lpc -l com2,/run/acrn/life_mngr_"$vm_name #for memsize setting mem_size=2048M acrn-dm -A -m $mem_size -s 0:0,hostbridge \ -s 2,pci-gvt -G "$2" \ -s 5,virtio-console,@stdio:stdio_port \ -s 6,virtio-hyper_dmabuf \ -s 3,virtio-blk,/home/ghost/acrn_new/uos/clear-26440-kvm.img \ -k /lib/modules/kernel/default-iot-lts2018 \ -s 4,virtio-net,tap0 \ -s 7,virtio-rnd \ --ovmf /usr/share/acrn/bios/OVMF.fd \ $pm_channel $pm_by_vuart $pm_vuart_node \ $logger_setting \ --mac_seed $mac_seed \ $vm_name } #add following cmdline to grub.cfg and update kernel #when launching LaaG by OVMF #rw rootwait maxcpus=1 nohpet console=tty0 console=hvc0 #console=ttyS0 no_timer_check ignore_loglevel #log_buf_len=16M consoleblank=0 #tsc=reliable i915.avail_planes_per_pipe="64 448 8" #i915.enable_hangcheck=0 i915.nuclear_pageflip=1 #i915.enable_guc_loading=0 #i915.enable_guc_submission=0 i915.enable_guc=0 # offline SOS CPUs except BSP before launch UOS for i in `ls -d /sys/devices/system/cpu/cpu[1-99]`; do online=`cat $i/online` idx=`echo $i \| tr -cd "[1-99]"` echo cpu$idx online=$online if [ "$online" = "1" ]; then echo 0 > $i/online # during boot time, cpu hotplug may be disabled by pci_device_probe during a pci module insmod while [ "$online" = "1" ]; do sleep 1 echo 0 > $i/online online=`cat $i/online` done echo $idx > ${offline_path}/offline_cpu fi done if [ "$1" = "-C" ];then echo "runc_container" run_container else launch_clear 1 "64 448 8" 0x070F00 fi From: acrn-users@... <acrn-users@...> on behalf of Victor Sun <victor.sun@...> Sent: Thursday, November 21, 2019 11:18 AM To: acrn-users@... <acrn-users@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hi Rajagopal, Please post your UOS launch script. BR, Victor On 11/21/2019 1:41 PM, Rajagopal Aravindan via Lists.Projectacrn.Org wrote: Hello Victor, W.r.t the subject, we were able to get ACRN to boot into SOS. However, when trying to start UOS we run into the below error GVT: open /sys/kernel/gvt/control/create_gvt_instance failed GVT: init failed : No such file or directory pci pci-gvt init failed I guess its related to graphics virtualization but not able to get past that. Any inputs on this, please ? PFB (my signature) the board & sdc xmls. Thanks, Rajagopal board.xml <acrn-config board="acer"> <BIOS_INFO> BIOS Information Vendor: Acer Version: P21-A1E Release Date: 04/12/2019 BIOS Revision: 5.12 </BIOS_INFO> <BASE_BOARD_INFO> Base Board Information Manufacturer: Acer Product Name: H310CH5-M23 Version: P21-A1E </BASE_BOARD_INFO> <PCI_DEVICE> 00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 08) 00:02.0 VGA compatible controller: Intel Corporation 8th Gen Core Processor Gaussian Mixture Model Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] 00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model Region 0: Memory at df12f000 (64-bit, non-prefetchable) [disabled] [size=4K] 00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller Region 0: Memory at df110000 (64-bit, non-prefetchable) [size=64K] 00:14.2 Signal processing controller: Intel Corporation 200 Series PCH Thermal Subsystem Region 0: Memory at df12e000 (64-bit, non-prefetchable) [size=4K] 00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1 Region 0: Memory at df12d000 (64-bit, non-prefetchable) [size=4K] 00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode] Region 0: Memory at df128000 (32-bit, non-prefetchable) [size=8K] Region 1: Memory at df12c000 (32-bit, non-prefetchable) [size=256] Region 5: Memory at df12b000 (32-bit, non-prefetchable) [size=2K] 00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 (rev f0) 00:1f.0 ISA bridge: Intel Corporation Device a2ca 00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller Region 0: Memory at df124000 (32-bit, non-prefetchable) [disabled] [size=16K] 00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio Region 0: Memory at df120000 (64-bit, non-prefetchable) [size=16K] Region 4: Memory at df100000 (64-bit, non-prefetchable) [size=64K] 00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller Region 0: Memory at df12a000 (64-bit, non-prefetchable) [size=256] 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Region 2: Memory at df004000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at df000000 (64-bit, non-prefetchable) [size=16K] </PCI_DEVICE> <PCI_VID_PID> 00:00.0 0600: 8086:3e1f (rev 08) 00:02.0 0300: 8086:3e91 00:08.0 0880: 8086:1911 00:14.0 0c03: 8086:a2af 00:14.2 1180: 8086:a2b1 00:16.0 0780: 8086:a2ba 00:17.0 0106: 8086:a282 00:1c.0 0604: 8086:a294 (rev f0) 00:1f.0 0601: 8086:a2ca 00:1f.2 0580: 8086:a2a1 00:1f.3 0403: 8086:a2f0 00:1f.4 0c05: 8086:a2a3 01:00.0 0200: 10ec:8168 (rev 15) </PCI_VID_PID> <WAKE_VECTOR_INFO> #define WAKE_VECTOR_32 0xB65B0F0CUL #define WAKE_VECTOR_64 0xB65B0F18UL </WAKE_VECTOR_INFO> <RESET_REGISTER_INFO> #define RESET_REGISTER_ADDRESS 0xCF9UL #define RESET_REGISTER_SPACE_ID SPACE_SYSTEM_IO #define RESET_REGISTER_VALUE 0x6U </RESET_REGISTER_INFO> <PM_INFO> #define PM1A_EVT_SPACE_ID SPACE_SYSTEM_IO #define PM1A_EVT_BIT_WIDTH 0x20U #define PM1A_EVT_BIT_OFFSET 0x0U #define PM1A_EVT_ADDRESS 0x1800UL #define PM1A_EVT_ACCESS_SIZE 0x2U #define PM1B_EVT_SPACE_ID SPACE_SYSTEM_IO #define PM1B_EVT_BIT_WIDTH 0x0U #define PM1B_EVT_BIT_OFFSET 0x0U #define PM1B_EVT_ADDRESS 0x0UL #define PM1B_EVT_ACCESS_SIZE 0x2U #define PM1A_CNT_SPACE_ID SPACE_SYSTEM_IO #define PM1A_CNT_BIT_WIDTH 0x10U #define PM1A_CNT_BIT_OFFSET 0x0U #define PM1A_CNT_ADDRESS 0x1804UL #define PM1A_CNT_ACCESS_SIZE 0x2U #define PM1B_CNT_SPACE_ID SPACE_SYSTEM_IO #define PM1B_CNT_BIT_WIDTH 0x0U #define PM1B_CNT_BIT_OFFSET 0x0U #define PM1B_CNT_ADDRESS 0x0UL #define PM1B_CNT_ACCESS_SIZE 0x2U </PM_INFO> <S3_INFO> #define S3_PKG_VAL_PM1A 0x5U #define S3_PKG_VAL_PM1B 0U #define S3_PKG_RESERVED 0x0U </S3_INFO> <S5_INFO> #define S5_PKG_VAL_PM1A 0x7U #define S5_PKG_VAL_PM1B 0U #define S5_PKG_RESERVED 0x0U </S5_INFO> <DRHD_INFO> #define DRHD_COUNT 2U #define DRHD0_DEV_CNT 0x1U #define DRHD0_SEGMENT 0x0U #define DRHD0_FLAGS 0x0U #define DRHD0_REG_BASE 0xFED90000UL #define DRHD0_IGNORE true #define DRHD0_DEVSCOPE0_TYPE 0x1U #define DRHD0_DEVSCOPE0_ID 0x0U #define DRHD0_DEVSCOPE0_BUS 0x0U #define DRHD0_DEVSCOPE0_PATH 0x10U #define DRHD1_DEV_CNT 0x2U #define DRHD1_SEGMENT 0x0U #define DRHD1_FLAGS 0x1U #define DRHD1_REG_BASE 0xFED91000UL #define DRHD1_IGNORE false #define DRHD1_DEVSCOPE0_TYPE 0x3U #define DRHD1_DEVSCOPE0_ID 0x2U #define DRHD1_DEVSCOPE0_BUS 0xf0U #define DRHD1_DEVSCOPE0_PATH 0xf8U #define DRHD1_DEVSCOPE1_TYPE 0x4U #define DRHD1_DEVSCOPE1_ID 0x0U #define DRHD1_DEVSCOPE1_BUS 0x0U #define DRHD1_DEVSCOPE1_PATH 0xf8U </DRHD_INFO> <CPU_BRAND> "Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz" </CPU_BRAND> <CX_INFO> {{SPACE_FFixedHW, 0x00U, 0x00U, 0x00U, 0x00UL}, 0x01U, 0x01U, 0x00U}, / C1 / {{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1816UL}, 0x02U, 0x97U, 0x00U}, / C2 / {{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1819UL}, 0x03U, 0x40AU, 0x00U}, / C3 / </CX_INFO> <PX_INFO> {0xE10UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002400UL, 0x002400UL}, / P0 / {0xD48UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002200UL, 0x002200UL}, / P1 / {0xC80UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002000UL, 0x002000UL}, / P2 / {0xBB8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001E00UL, 0x001E00UL}, / P3 / {0xB54UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001D00UL, 0x001D00UL}, / P4 / {0xA8CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001B00UL, 0x001B00UL}, / P5 / {0x9C4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001900UL, 0x001900UL}, / P6 / {0x8FCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001700UL, 0x001700UL}, / P7 / {0x834UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001500UL, 0x001500UL}, / P8 / {0x76CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001300UL, 0x001300UL}, / P9 / {0x6A4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001100UL, 0x001100UL}, / P10 / {0x5DCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x000F00UL, 0x000F00UL}, / P11 / {0x578UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000E00UL, 0x000E00UL}, / P12 / {0x4B0UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000C00UL, 0x000C00UL}, / P13 / {0x3E8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000A00UL, 0x000A00UL}, / P14 / {0x320UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000800UL, 0x000800UL}, / P15 / </PX_INFO> <CLOS_INFO> clos supported by cache:False clos max:0 </CLOS_INFO> <SYSTEM_RAM_INFO> 00001000-00057fff : System RAM 00059000-0009dfff : System RAM 00100000-3fffffff : System RAM 40400000-ae6bafff : System RAM ae6bd000-b58b7fff : System RAM b6540000-b6549fff : System RAM b6ffe000-b6ffefff : System RAM 100000000-23effffff : System RAM </SYSTEM_RAM_INFO> <BLOCK_DEVICE_INFO> /dev/sda3: TYPE="ext4" /dev/sda4: TYPE="ext4" </BLOCK_DEVICE_INFO> <TTYS_INFO> seri:/dev/ttyS0 type:portio base:0x3F8 irq:4 </TTYS_INFO> <AVAILABLE_IRQ_INFO> 3, 5, 6, 7, 10, 11, 12, 13, 14, 15 </AVAILABLE_IRQ_INFO> <TOTAL_MEM_INFO> 7975552 kB </TOTAL_MEM_INFO> <CPU_PROCESSOR_INFO> 0, 1, 2, 3 </CPU_PROCESSOR_INFO> </acrn-config> sdc.xml <?xml version='1.0' encoding='utf-8'?> <acrn-config board="acer" scenario="sdc"> <vm id="0"> <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order> <name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name> <uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid> <guest_flags desc="Select all applicable flags for the VM" multiselect="true"> <guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag> </guest_flags> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution." /> <memory> <start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa> <size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size> </memory> <os_config> <name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name> <kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type> <kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod> <bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs> </os_config> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id> </vuart> <pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num> <pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs> <board_private> <rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs> <console desc="ttyS console for Linux kernel">/dev/ttyS0</console> <bootargs desc="Specify kernel boot arguments"> rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3 i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1 </bootargs> </board_private> </vm> <vm id="1"> <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order> <uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid> <guest_flags desc="Select all applicable flags for the VM" multiselect="true"> <guest_flag /> </guest_flags> <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU."> <pcpu_id>1</pcpu_id> <pcpu_id>2</pcpu_id> <pcpu_id>3</pcpu_id> </vcpu_affinity> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution." /> <epc_section desc="epc section"> <base desc="SGX EPC section base, must be page aligned">0</base> <size desc="SGX EPC section size in Bytes, must be page aligned">0</size> </epc_section> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." >INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id> </vuart> </vm> <vm configurable="0" desc="specific for Kata" id="2"> <load_order configurable="0" desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM.">POST_LAUNCHED_VM</load_order> <uuid configurable="0" desc="vm uuid">a7ada506-1ab0-4b6b-a0da-e513ca9b8c2f</uuid> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos> <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU."> <pcpu_id>3</pcpu_id> </vcpu_affinity> <epc_section desc="epc section"> <base desc="SGX EPC section base, must be page aligned">0</base> <size desc="SGX EPC section size in Bytes, must be page aligned">0</size> </epc_section> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base configurable="0" desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">COM1_BASE</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base configurable="0" desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">COM2_BASE</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id> </vuart> </vm> </acrn-config> Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails." Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails." Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails."
More All Messages By This Member
Liu, Fuzhong #441 Hi Rajagopal, The iasl version is too old; it doesn’t match with acrn-dm of v1.4. Please use the one in Clear build 31670(iasl version 20191018). https://download.clearlinux.org/releases/31670/clear/ Thanks! BR. Fuzhong toggle quoted message Show quoted text From: acrn-users@... <acrn-users@...> On Behalf Of Rajagopal Aravindan via Lists.Projectacrn.Org Sent: Thursday, November 21, 2019 9:00 PM To: Liu, Fuzhong <fuzhong.liu@...>; acrn-users@...; Sun, Victor <victor.sun@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hello Victor & Fuzhong, Thanks for pitching in Fuzhong. >>Could you please share the SOS kernel version you used? We tried 2 kernels for SOS, as below ... 4.19.0-22.iot-lts2018-sos - ClearLinux's pre-built kernel 4.19.73-PKT-190919T160721Z-00001-g7a3835deba16 - Built from source https://github.com/projectacrn/acrn-kernel/ >>Anyway, please remove -s 2,pci-gvt -G "$2" \ in your script; and have a try. We ran into the error below (my signature). >>acrn-dm -v DM version is: 1.4-unstable-7b0cafa8-dirty (daily tag:acrn-2019w43.5-140000p), build by root@2019-11-20 10:51:28 [ acrn-2019w43.5-140000p is the daily tag which i picked from release page. Not sure why this gives DM version as unstable!! ] >>/usr/sbin/iasl -v Intel ACPI Component Architecture ASL+ Optimizing Compiler/Disassembler version 20180105 Copyright (c) 2000 - 2018 Intel Corporation Thanks, Rajagopal cpu1 online=0 cpu2 online=0 cpu3 online=0 SW_LOAD: get kernel path /lib/modules/kernel/default-iot-lts2018 SW_LOAD: get ovmf path /usr/share/acrn/bios/OVMF.fd, size 0x200000 pm by vuart node-index = 0 logger: name=console, level=4 logger: name=kmsg, level=3 logger: name=disk, level=5 vm_create: vm1 VHM api version 1.0 vm_setup_memory: size=0x80000000 open hugetlbfs file /run/hugepage/acrn/huge_lv1/vm1/D279543825D611E8864ECB7A18B34643 open hugetlbfs file /run/hugepage/acrn/huge_lv2/vm1/D279543825D611E8864ECB7A18B34643 level 0 free/need pages:1/1 page size:0x200000 level 1 free/need pages:2/2 page size:0x40000000 try to setup hugepage with: level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0 level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0 total_size 0x180000000 mmap ptr 0x0x7f25be079000 -> baseaddr 0x0x7f25c0000000 mmap 0x80000000@0x7f25c0000000 touch 2 pages with pagesz 0x40000000 mmap 0x200000@0x7f26bfe00000 touch 1 pages with pagesz 0x200000 really setup hugepage with: level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0 level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0 vm_init_vdevs pci init hostbridge pci init lpc pci init virtio-blk pci init virtio-net pci init virtio-console pci init virtio-hyper_dmabuf pci init virtio-rnd tpm: init_vtpm2:Invalid socket path! polling 38... Listening 38... /tmp/dm.XBeZ4MB 46: [0004] Address : fec00000 Error 6303 - ^ Integer too large for target (00000000FEC00000 - max 1 bytes) /tmp/dm.XBeZ4MB 58: [0001] Subtable Type : 02 Error 6302 - Flag value is too large ^ (Maximum 1 bit) /tmp/dm.XBeZ4MB 62: [0004] Interrupt : 00000009 Error 6302 - Flag value is too large ^ (Maximum 2 bit) /tmp/dm.XBeZ4MB 63: [0002] Flags (decoded below) : 000D Error 6302 - Flag value is too large ^ (Maximum 2 bit) acpi_build failed, error=-1 pci deinit hostbridge pci deinit lpc pci deinit virtio-blk pci deinit virtio-net vtnet tx thread closing... pci deinit virtio-console pci deinit virtio-hyper_dmabuf pci deinit virtio-rnd mngr_client_new: Failed to accept from fd 38, err: Invalid argument Stop listening 38... Stop polling 38... From: acrn-users@... <acrn-users@...> on behalf of Liu, Fuzhong <fuzhong.liu@...> Sent: Thursday, November 21, 2019 4:13 PM To: acrn-users@... <acrn-users@...>; Sun, Victor <victor.sun@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hi Rajagopal Is GVT-g patches included in your SOS kernel? Could you please share the SOS kernel version you used? Anyway, please remove -s 2,pci-gvt -G "$2" \ in your script; and have a try. If the issue is still there, please run following cmd in sos: acrn-dm -v /usr/sbin/iasl -v Thanks! BR. Fuzhong From: acrn-users@... <acrn-users@...> On Behalf Of Rajagopal Aravindan via Lists.Projectacrn.Org Sent: Thursday, November 21, 2019 3:40 PM To: Sun, Victor <victor.sun@...>; acrn-users@... Subject: Re: [acrn-users] ACRN on CoffeeLake Hello Victor, >>Please post your UOS launch script. PFB, my signature. Thanks, Rajagopal UOS launch script #!/bin/bash # Copyright (C) 2019 Intel Corporation. # SPDX-License-Identifier: BSD-3-Clause offline_path="/sys/class/vhm/acrn_vhm" # Check the device file of /dev/acrn_hsm to determine the offline_path if [ -e "/dev/acrn_hsm" ]; then offline_path="/sys/class/acrn/acrn_hsm" fi function run_container() { vm_name=vm1 config_src="/usr/share/acrn/samples/nuc/runC.json" shell="/usr/share/acrn/conf/add/$vm_name.sh" arg_file="/usr/share/acrn/conf/add/$vm_name.args" runc_bundle="/usr/share/acrn/conf/add/runc/$vm_name" rootfs_dir="/usr/share/acrn/conf/add/runc/rootfs" config_dst="$runc_bundle/config.json" input=$(runc list -f table \| awk '{print $1}''{print $3}') arr=(${input// / }) for((i=0;i<${#arr[@]};i++)) do if [ "$vm_name" = "${arr[$i]}" ]; then if [ "running" = "${arr[$i+1]}" ]; then echo "runC instance ${arr[$i]} is running" exit else runc kill ${arr[$i]} runc delete ${arr[$i]} fi fi done vmsts=$(acrnctl list) vms=(${vmsts// / }) for((i=0;i<${#vms[@]};i++)) do if [ "$vm_name" = "${vms[$i]}" ]; then if [ "stopped" != "${vms[$i+1]}" ]; then echo "Uos ${vms[$i]} ${vms[$i+1]}" acrnctl stop ${vms[$i]} fi fi done if [ ! -f "$shell" ]; then echo "Pls add the vm at first!" exit fi if [ ! -f "$arg_file" ]; then echo "Pls add the vm args!" exit fi if [ ! -d "$rootfs_dir" ]; then mkdir -p "$rootfs_dir" fi if [ ! -d "$runc_bundle" ]; then mkdir -p "$runc_bundle" fi if [ ! -f "$config_dst" ]; then cp "$config_src" "$config_dst" args=$(sed '{s/-C//g;s/^[ \t]//g;s/^/\"/;s/ /\",\"/g;s/$/\"/}' ${arg_file})* sed -i "s\|\"sh\"\|\"$shell\", $args\|" $config_dst fi runc run --bundle $runc_bundle -d $vm_name echo "The runC container is running in backgroud" echo "'#runc exec <vmname> bash' to login the container bash" exit } function launch_clear() { mac=$(cat /sys/class/net/e/address)* vm_name=vm$1 mac_seed=${mac:9:8}-${vm_name} #check if the vm is running or not vm_ps=$(pgrep -a -f acrn-dm) result=$(echo $vm_ps \| grep -w "${vm_name}") if [[ "$result" != "" ]]; then echo "$vm_name is running, can't create twice!" exit fi #logger_setting, format: logger_name,level; like following logger_setting="--logger_setting console,level=4;kmsg,level=3;disk,level=5" #for pm by vuart setting pm_channel="--pm_notify_channel uart " pm_by_vuart="--pm_by_vuart pty,/run/acrn/life_mngr_"$vm_name pm_vuart_node=" -s 1:0,lpc -l com2,/run/acrn/life_mngr_"$vm_name #for memsize setting mem_size=2048M acrn-dm -A -m $mem_size -s 0:0,hostbridge \ -s 2,pci-gvt -G "$2" \ -s 5,virtio-console,@stdio:stdio_port \ -s 6,virtio-hyper_dmabuf \ -s 3,virtio-blk,/home/ghost/acrn_new/uos/clear-26440-kvm.img \ -k /lib/modules/kernel/default-iot-lts2018 \ -s 4,virtio-net,tap0 \ -s 7,virtio-rnd \ --ovmf /usr/share/acrn/bios/OVMF.fd \ $pm_channel $pm_by_vuart $pm_vuart_node \ $logger_setting \ --mac_seed $mac_seed \ $vm_name } #add following cmdline to grub.cfg and update kernel #when launching LaaG by OVMF #rw rootwait maxcpus=1 nohpet console=tty0 console=hvc0 #console=ttyS0 no_timer_check ignore_loglevel #log_buf_len=16M consoleblank=0 #tsc=reliable i915.avail_planes_per_pipe="64 448 8" #i915.enable_hangcheck=0 i915.nuclear_pageflip=1 #i915.enable_guc_loading=0 #i915.enable_guc_submission=0 i915.enable_guc=0 # offline SOS CPUs except BSP before launch UOS for i in `ls -d /sys/devices/system/cpu/cpu[1-99]`; do online=`cat $i/online` idx=`echo $i \| tr -cd "[1-99]"` echo cpu$idx online=$online if [ "$online" = "1" ]; then echo 0 > $i/online # during boot time, cpu hotplug may be disabled by pci_device_probe during a pci module insmod while [ "$online" = "1" ]; do sleep 1 echo 0 > $i/online online=`cat $i/online` done echo $idx > ${offline_path}/offline_cpu fi done if [ "$1" = "-C" ];then echo "runc_container" run_container else launch_clear 1 "64 448 8" 0x070F00 fi From: acrn-users@... <acrn-users@...> on behalf of Victor Sun <victor.sun@...> Sent: Thursday, November 21, 2019 11:18 AM To: acrn-users@... <acrn-users@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hi Rajagopal, Please post your UOS launch script. BR, Victor On 11/21/2019 1:41 PM, Rajagopal Aravindan via Lists.Projectacrn.Org wrote: Hello Victor, W.r.t the subject, we were able to get ACRN to boot into SOS. However, when trying to start UOS we run into the below error GVT: open /sys/kernel/gvt/control/create_gvt_instance failed GVT: init failed : No such file or directory pci pci-gvt init failed I guess its related to graphics virtualization but not able to get past that. Any inputs on this, please ? PFB (my signature) the board & sdc xmls. Thanks, Rajagopal board.xml <acrn-config board="acer"> <BIOS_INFO> BIOS Information Vendor: Acer Version: P21-A1E Release Date: 04/12/2019 BIOS Revision: 5.12 </BIOS_INFO> <BASE_BOARD_INFO> Base Board Information Manufacturer: Acer Product Name: H310CH5-M23 Version: P21-A1E </BASE_BOARD_INFO> <PCI_DEVICE> 00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 08) 00:02.0 VGA compatible controller: Intel Corporation 8th Gen Core Processor Gaussian Mixture Model Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] 00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model Region 0: Memory at df12f000 (64-bit, non-prefetchable) [disabled] [size=4K] 00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller Region 0: Memory at df110000 (64-bit, non-prefetchable) [size=64K] 00:14.2 Signal processing controller: Intel Corporation 200 Series PCH Thermal Subsystem Region 0: Memory at df12e000 (64-bit, non-prefetchable) [size=4K] 00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1 Region 0: Memory at df12d000 (64-bit, non-prefetchable) [size=4K] 00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode] Region 0: Memory at df128000 (32-bit, non-prefetchable) [size=8K] Region 1: Memory at df12c000 (32-bit, non-prefetchable) [size=256] Region 5: Memory at df12b000 (32-bit, non-prefetchable) [size=2K] 00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 (rev f0) 00:1f.0 ISA bridge: Intel Corporation Device a2ca 00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller Region 0: Memory at df124000 (32-bit, non-prefetchable) [disabled] [size=16K] 00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio Region 0: Memory at df120000 (64-bit, non-prefetchable) [size=16K] Region 4: Memory at df100000 (64-bit, non-prefetchable) [size=64K] 00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller Region 0: Memory at df12a000 (64-bit, non-prefetchable) [size=256] 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Region 2: Memory at df004000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at df000000 (64-bit, non-prefetchable) [size=16K] </PCI_DEVICE> <PCI_VID_PID> 00:00.0 0600: 8086:3e1f (rev 08) 00:02.0 0300: 8086:3e91 00:08.0 0880: 8086:1911 00:14.0 0c03: 8086:a2af 00:14.2 1180: 8086:a2b1 00:16.0 0780: 8086:a2ba 00:17.0 0106: 8086:a282 00:1c.0 0604: 8086:a294 (rev f0) 00:1f.0 0601: 8086:a2ca 00:1f.2 0580: 8086:a2a1 00:1f.3 0403: 8086:a2f0 00:1f.4 0c05: 8086:a2a3 01:00.0 0200: 10ec:8168 (rev 15) </PCI_VID_PID> <WAKE_VECTOR_INFO> #define WAKE_VECTOR_32 0xB65B0F0CUL #define WAKE_VECTOR_64 0xB65B0F18UL </WAKE_VECTOR_INFO> <RESET_REGISTER_INFO> #define RESET_REGISTER_ADDRESS 0xCF9UL #define RESET_REGISTER_SPACE_ID SPACE_SYSTEM_IO #define RESET_REGISTER_VALUE 0x6U </RESET_REGISTER_INFO> <PM_INFO> #define PM1A_EVT_SPACE_ID SPACE_SYSTEM_IO #define PM1A_EVT_BIT_WIDTH 0x20U #define PM1A_EVT_BIT_OFFSET 0x0U #define PM1A_EVT_ADDRESS 0x1800UL #define PM1A_EVT_ACCESS_SIZE 0x2U #define PM1B_EVT_SPACE_ID SPACE_SYSTEM_IO #define PM1B_EVT_BIT_WIDTH 0x0U #define PM1B_EVT_BIT_OFFSET 0x0U #define PM1B_EVT_ADDRESS 0x0UL #define PM1B_EVT_ACCESS_SIZE 0x2U #define PM1A_CNT_SPACE_ID SPACE_SYSTEM_IO #define PM1A_CNT_BIT_WIDTH 0x10U #define PM1A_CNT_BIT_OFFSET 0x0U #define PM1A_CNT_ADDRESS 0x1804UL #define PM1A_CNT_ACCESS_SIZE 0x2U #define PM1B_CNT_SPACE_ID SPACE_SYSTEM_IO #define PM1B_CNT_BIT_WIDTH 0x0U #define PM1B_CNT_BIT_OFFSET 0x0U #define PM1B_CNT_ADDRESS 0x0UL #define PM1B_CNT_ACCESS_SIZE 0x2U </PM_INFO> <S3_INFO> #define S3_PKG_VAL_PM1A 0x5U #define S3_PKG_VAL_PM1B 0U #define S3_PKG_RESERVED 0x0U </S3_INFO> <S5_INFO> #define S5_PKG_VAL_PM1A 0x7U #define S5_PKG_VAL_PM1B 0U #define S5_PKG_RESERVED 0x0U </S5_INFO> <DRHD_INFO> #define DRHD_COUNT 2U #define DRHD0_DEV_CNT 0x1U #define DRHD0_SEGMENT 0x0U #define DRHD0_FLAGS 0x0U #define DRHD0_REG_BASE 0xFED90000UL #define DRHD0_IGNORE true #define DRHD0_DEVSCOPE0_TYPE 0x1U #define DRHD0_DEVSCOPE0_ID 0x0U #define DRHD0_DEVSCOPE0_BUS 0x0U #define DRHD0_DEVSCOPE0_PATH 0x10U #define DRHD1_DEV_CNT 0x2U #define DRHD1_SEGMENT 0x0U #define DRHD1_FLAGS 0x1U #define DRHD1_REG_BASE 0xFED91000UL #define DRHD1_IGNORE false #define DRHD1_DEVSCOPE0_TYPE 0x3U #define DRHD1_DEVSCOPE0_ID 0x2U #define DRHD1_DEVSCOPE0_BUS 0xf0U #define DRHD1_DEVSCOPE0_PATH 0xf8U #define DRHD1_DEVSCOPE1_TYPE 0x4U #define DRHD1_DEVSCOPE1_ID 0x0U #define DRHD1_DEVSCOPE1_BUS 0x0U #define DRHD1_DEVSCOPE1_PATH 0xf8U </DRHD_INFO> <CPU_BRAND> "Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz" </CPU_BRAND> <CX_INFO> {{SPACE_FFixedHW, 0x00U, 0x00U, 0x00U, 0x00UL}, 0x01U, 0x01U, 0x00U}, / C1 / {{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1816UL}, 0x02U, 0x97U, 0x00U}, / C2 / {{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1819UL}, 0x03U, 0x40AU, 0x00U}, / C3 / </CX_INFO> <PX_INFO> {0xE10UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002400UL, 0x002400UL}, / P0 / {0xD48UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002200UL, 0x002200UL}, / P1 / {0xC80UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002000UL, 0x002000UL}, / P2 / {0xBB8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001E00UL, 0x001E00UL}, / P3 / {0xB54UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001D00UL, 0x001D00UL}, / P4 / {0xA8CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001B00UL, 0x001B00UL}, / P5 / {0x9C4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001900UL, 0x001900UL}, / P6 / {0x8FCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001700UL, 0x001700UL}, / P7 / {0x834UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001500UL, 0x001500UL}, / P8 / {0x76CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001300UL, 0x001300UL}, / P9 / {0x6A4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001100UL, 0x001100UL}, / P10 / {0x5DCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x000F00UL, 0x000F00UL}, / P11 / {0x578UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000E00UL, 0x000E00UL}, / P12 / {0x4B0UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000C00UL, 0x000C00UL}, / P13 / {0x3E8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000A00UL, 0x000A00UL}, / P14 / {0x320UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000800UL, 0x000800UL}, / P15 / </PX_INFO> <CLOS_INFO> clos supported by cache:False clos max:0 </CLOS_INFO> <SYSTEM_RAM_INFO> 00001000-00057fff : System RAM 00059000-0009dfff : System RAM 00100000-3fffffff : System RAM 40400000-ae6bafff : System RAM ae6bd000-b58b7fff : System RAM b6540000-b6549fff : System RAM b6ffe000-b6ffefff : System RAM 100000000-23effffff : System RAM </SYSTEM_RAM_INFO> <BLOCK_DEVICE_INFO> /dev/sda3: TYPE="ext4" /dev/sda4: TYPE="ext4" </BLOCK_DEVICE_INFO> <TTYS_INFO> seri:/dev/ttyS0 type:portio base:0x3F8 irq:4 </TTYS_INFO> <AVAILABLE_IRQ_INFO> 3, 5, 6, 7, 10, 11, 12, 13, 14, 15 </AVAILABLE_IRQ_INFO> <TOTAL_MEM_INFO> 7975552 kB </TOTAL_MEM_INFO> <CPU_PROCESSOR_INFO> 0, 1, 2, 3 </CPU_PROCESSOR_INFO> </acrn-config> sdc.xml <?xml version='1.0' encoding='utf-8'?> <acrn-config board="acer" scenario="sdc"> <vm id="0"> <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order> <name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name> <uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid> <guest_flags desc="Select all applicable flags for the VM" multiselect="true"> <guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag> </guest_flags> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution." /> <memory> <start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa> <size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size> </memory> <os_config> <name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name> <kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type> <kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod> <bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs> </os_config> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id> </vuart> <pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num> <pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs> <board_private> <rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs> <console desc="ttyS console for Linux kernel">/dev/ttyS0</console> <bootargs desc="Specify kernel boot arguments"> rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3 i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1 </bootargs> </board_private> </vm> <vm id="1"> <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order> <uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid> <guest_flags desc="Select all applicable flags for the VM" multiselect="true"> <guest_flag /> </guest_flags> <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU."> <pcpu_id>1</pcpu_id> <pcpu_id>2</pcpu_id> <pcpu_id>3</pcpu_id> </vcpu_affinity> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution." /> <epc_section desc="epc section"> <base desc="SGX EPC section base, must be page aligned">0</base> <size desc="SGX EPC section size in Bytes, must be page aligned">0</size> </epc_section> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." >INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id> </vuart> </vm> <vm configurable="0" desc="specific for Kata" id="2"> <load_order configurable="0" desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM.">POST_LAUNCHED_VM</load_order> <uuid configurable="0" desc="vm uuid">a7ada506-1ab0-4b6b-a0da-e513ca9b8c2f</uuid> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos> <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU."> <pcpu_id>3</pcpu_id> </vcpu_affinity> <epc_section desc="epc section"> <base desc="SGX EPC section base, must be page aligned">0</base> <size desc="SGX EPC section size in Bytes, must be page aligned">0</size> </epc_section> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base configurable="0" desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">COM1_BASE</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base configurable="0" desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">COM2_BASE</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id> </vuart> </vm> </acrn-config> Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails." Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails." Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails."
More All Messages By This Member
Rajagopal Aravindan #443 Hello Fuzhong, >>Please use the one in Clear build 31670(iasl version 20191018). It worked. I am now able to boot my UOS without GUI on using above iasl. >>Is GVT-g patches included in your SOS kernel? What / how to check ? I guess this would be needed to boot UOS with GUI, right ? Thanks, Rajagopal toggle quoted message Show quoted text On Thu, Nov 21, 2019 at 7:27 PM Liu, Fuzhong <fuzhong.liu@...> wrote: Hi Rajagopal, The iasl version is too old; it doesn’t match with acrn-dm of v1.4. Please use the one in Clear build 31670(iasl version 20191018). https://download.clearlinux.org/releases/31670/clear/ Thanks! BR. Fuzhong From: acrn-users@... <acrn-users@...> On Behalf Of Rajagopal Aravindan via Lists.Projectacrn.Org Sent: Thursday, November 21, 2019 9:00 PM To: Liu, Fuzhong <fuzhong.liu@...>; acrn-users@...; Sun, Victor <victor.sun@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hello Victor & Fuzhong, Thanks for pitching in Fuzhong. >>Could you please share the SOS kernel version you used? We tried 2 kernels for SOS, as below ... 4.19.0-22.iot-lts2018-sos - ClearLinux's pre-built kernel 4.19.73-PKT-190919T160721Z-00001-g7a3835deba16 - Built from source https://github.com/projectacrn/acrn-kernel/ >>Anyway, please remove -s 2,pci-gvt -G "$2" \ in your script; and have a try. We ran into the error below (my signature). >>acrn-dm -v DM version is: 1.4-unstable-7b0cafa8-dirty (daily tag:acrn-2019w43.5-140000p), build by root@2019-11-20 10:51:28 [ acrn-2019w43.5-140000p is the daily tag which i picked from release page. Not sure why this gives DM version as unstable!! ] >>/usr/sbin/iasl -v Intel ACPI Component Architecture ASL+ Optimizing Compiler/Disassembler version 20180105 Copyright (c) 2000 - 2018 Intel Corporation Thanks, Rajagopal cpu1 online=0 cpu2 online=0 cpu3 online=0 SW_LOAD: get kernel path /lib/modules/kernel/default-iot-lts2018 SW_LOAD: get ovmf path /usr/share/acrn/bios/OVMF.fd, size 0x200000 pm by vuart node-index = 0 logger: name=console, level=4 logger: name=kmsg, level=3 logger: name=disk, level=5 vm_create: vm1 VHM api version 1.0 vm_setup_memory: size=0x80000000 open hugetlbfs file /run/hugepage/acrn/huge_lv1/vm1/D279543825D611E8864ECB7A18B34643 open hugetlbfs file /run/hugepage/acrn/huge_lv2/vm1/D279543825D611E8864ECB7A18B34643 level 0 free/need pages:1/1 page size:0x200000 level 1 free/need pages:2/2 page size:0x40000000 try to setup hugepage with: level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0 level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0 total_size 0x180000000 mmap ptr 0x0x7f25be079000 -> baseaddr 0x0x7f25c0000000 mmap 0x80000000@0x7f25c0000000 touch 2 pages with pagesz 0x40000000 mmap 0x200000@0x7f26bfe00000 touch 1 pages with pagesz 0x200000 really setup hugepage with: level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0 level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0 vm_init_vdevs pci init hostbridge pci init lpc pci init virtio-blk pci init virtio-net pci init virtio-console pci init virtio-hyper_dmabuf pci init virtio-rnd tpm: init_vtpm2:Invalid socket path! polling 38... Listening 38... /tmp/dm.XBeZ4MB 46: [0004] Address : fec00000 Error 6303 - ^ Integer too large for target (00000000FEC00000 - max 1 bytes) /tmp/dm.XBeZ4MB 58: [0001] Subtable Type : 02 Error 6302 - Flag value is too large ^ (Maximum 1 bit) /tmp/dm.XBeZ4MB 62: [0004] Interrupt : 00000009 Error 6302 - Flag value is too large ^ (Maximum 2 bit) /tmp/dm.XBeZ4MB 63: [0002] Flags (decoded below) : 000D Error 6302 - Flag value is too large ^ (Maximum 2 bit) acpi_build failed, error=-1 pci deinit hostbridge pci deinit lpc pci deinit virtio-blk pci deinit virtio-net vtnet tx thread closing... pci deinit virtio-console pci deinit virtio-hyper_dmabuf pci deinit virtio-rnd mngr_client_new: Failed to accept from fd 38, err: Invalid argument Stop listening 38... Stop polling 38... From: acrn-users@... <acrn-users@...> on behalf of Liu, Fuzhong <fuzhong.liu@...> Sent: Thursday, November 21, 2019 4:13 PM To: acrn-users@... <acrn-users@...>; Sun, Victor <victor.sun@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hi Rajagopal Is GVT-g patches included in your SOS kernel? Could you please share the SOS kernel version you used? Anyway, please remove -s 2,pci-gvt -G "$2" \ in your script; and have a try. If the issue is still there, please run following cmd in sos: acrn-dm -v /usr/sbin/iasl -v Thanks! BR. Fuzhong From: acrn-users@... <acrn-users@...> On Behalf Of Rajagopal Aravindan via Lists.Projectacrn.Org Sent: Thursday, November 21, 2019 3:40 PM To: Sun, Victor <victor.sun@...>; acrn-users@... Subject: Re: [acrn-users] ACRN on CoffeeLake Hello Victor, >>Please post your UOS launch script. PFB, my signature. Thanks, Rajagopal UOS launch script #!/bin/bash # Copyright (C) 2019 Intel Corporation. # SPDX-License-Identifier: BSD-3-Clause offline_path="/sys/class/vhm/acrn_vhm" # Check the device file of /dev/acrn_hsm to determine the offline_path if [ -e "/dev/acrn_hsm" ]; then offline_path="/sys/class/acrn/acrn_hsm" fi function run_container() { vm_name=vm1 config_src="/usr/share/acrn/samples/nuc/runC.json" shell="/usr/share/acrn/conf/add/$vm_name.sh" arg_file="/usr/share/acrn/conf/add/$vm_name.args" runc_bundle="/usr/share/acrn/conf/add/runc/$vm_name" rootfs_dir="/usr/share/acrn/conf/add/runc/rootfs" config_dst="$runc_bundle/config.json" input=$(runc list -f table \| awk '{print $1}''{print $3}') arr=(${input// / }) for((i=0;i<${#arr[@]};i++)) do if [ "$vm_name" = "${arr[$i]}" ]; then if [ "running" = "${arr[$i+1]}" ]; then echo "runC instance ${arr[$i]} is running" exit else runc kill ${arr[$i]} runc delete ${arr[$i]} fi fi done vmsts=$(acrnctl list) vms=(${vmsts// / }) for((i=0;i<${#vms[@]};i++)) do if [ "$vm_name" = "${vms[$i]}" ]; then if [ "stopped" != "${vms[$i+1]}" ]; then echo "Uos ${vms[$i]} ${vms[$i+1]}" acrnctl stop ${vms[$i]} fi fi done if [ ! -f "$shell" ]; then echo "Pls add the vm at first!" exit fi if [ ! -f "$arg_file" ]; then echo "Pls add the vm args!" exit fi if [ ! -d "$rootfs_dir" ]; then mkdir -p "$rootfs_dir" fi if [ ! -d "$runc_bundle" ]; then mkdir -p "$runc_bundle" fi if [ ! -f "$config_dst" ]; then cp "$config_src" "$config_dst" args=$(sed '{s/-C//g;s/^[ \t]//g;s/^/\"/;s/ /\",\"/g;s/$/\"/}' ${arg_file})* sed -i "s\|\"sh\"\|\"$shell\", $args\|" $config_dst fi runc run --bundle $runc_bundle -d $vm_name echo "The runC container is running in backgroud" echo "'#runc exec <vmname> bash' to login the container bash" exit } function launch_clear() { mac=$(cat /sys/class/net/e/address)* vm_name=vm$1 mac_seed=${mac:9:8}-${vm_name} #check if the vm is running or not vm_ps=$(pgrep -a -f acrn-dm) result=$(echo $vm_ps \| grep -w "${vm_name}") if [[ "$result" != "" ]]; then echo "$vm_name is running, can't create twice!" exit fi #logger_setting, format: logger_name,level; like following logger_setting="--logger_setting console,level=4;kmsg,level=3;disk,level=5" #for pm by vuart setting pm_channel="--pm_notify_channel uart " pm_by_vuart="--pm_by_vuart pty,/run/acrn/life_mngr_"$vm_name pm_vuart_node=" -s 1:0,lpc -l com2,/run/acrn/life_mngr_"$vm_name #for memsize setting mem_size=2048M acrn-dm -A -m $mem_size -s 0:0,hostbridge \ -s 2,pci-gvt -G "$2" \ -s 5,virtio-console,@stdio:stdio_port \ -s 6,virtio-hyper_dmabuf \ -s 3,virtio-blk,/home/ghost/acrn_new/uos/clear-26440-kvm.img \ -k /lib/modules/kernel/default-iot-lts2018 \ -s 4,virtio-net,tap0 \ -s 7,virtio-rnd \ --ovmf /usr/share/acrn/bios/OVMF.fd \ $pm_channel $pm_by_vuart $pm_vuart_node \ $logger_setting \ --mac_seed $mac_seed \ $vm_name } #add following cmdline to grub.cfg and update kernel #when launching LaaG by OVMF #rw rootwait maxcpus=1 nohpet console=tty0 console=hvc0 #console=ttyS0 no_timer_check ignore_loglevel #log_buf_len=16M consoleblank=0 #tsc=reliable i915.avail_planes_per_pipe="64 448 8" #i915.enable_hangcheck=0 i915.nuclear_pageflip=1 #i915.enable_guc_loading=0 #i915.enable_guc_submission=0 i915.enable_guc=0 # offline SOS CPUs except BSP before launch UOS for i in `ls -d /sys/devices/system/cpu/cpu[1-99]`; do online=`cat $i/online` idx=`echo $i \| tr -cd "[1-99]"` echo cpu$idx online=$online if [ "$online" = "1" ]; then echo 0 > $i/online # during boot time, cpu hotplug may be disabled by pci_device_probe during a pci module insmod while [ "$online" = "1" ]; do sleep 1 echo 0 > $i/online online=`cat $i/online` done echo $idx > ${offline_path}/offline_cpu fi done if [ "$1" = "-C" ];then echo "runc_container" run_container else launch_clear 1 "64 448 8" 0x070F00 fi From: acrn-users@... <acrn-users@...> on behalf of Victor Sun <victor.sun@...> Sent: Thursday, November 21, 2019 11:18 AM To: acrn-users@... <acrn-users@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hi Rajagopal, Please post your UOS launch script. BR, Victor On 11/21/2019 1:41 PM, Rajagopal Aravindan via Lists.Projectacrn.Org wrote: Hello Victor, W.r.t the subject, we were able to get ACRN to boot into SOS. However, when trying to start UOS we run into the below error GVT: open /sys/kernel/gvt/control/create_gvt_instance failed GVT: init failed : No such file or directory pci pci-gvt init failed I guess its related to graphics virtualization but not able to get past that. Any inputs on this, please ? PFB (my signature) the board & sdc xmls. Thanks, Rajagopal board.xml <acrn-config board="acer"> <BIOS_INFO> BIOS Information Vendor: Acer Version: P21-A1E Release Date: 04/12/2019 BIOS Revision: 5.12 </BIOS_INFO> <BASE_BOARD_INFO> Base Board Information Manufacturer: Acer Product Name: H310CH5-M23 Version: P21-A1E </BASE_BOARD_INFO> <PCI_DEVICE> 00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 08) 00:02.0 VGA compatible controller: Intel Corporation 8th Gen Core Processor Gaussian Mixture Model Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] 00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model Region 0: Memory at df12f000 (64-bit, non-prefetchable) [disabled] [size=4K] 00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller Region 0: Memory at df110000 (64-bit, non-prefetchable) [size=64K] 00:14.2 Signal processing controller: Intel Corporation 200 Series PCH Thermal Subsystem Region 0: Memory at df12e000 (64-bit, non-prefetchable) [size=4K] 00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1 Region 0: Memory at df12d000 (64-bit, non-prefetchable) [size=4K] 00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode] Region 0: Memory at df128000 (32-bit, non-prefetchable) [size=8K] Region 1: Memory at df12c000 (32-bit, non-prefetchable) [size=256] Region 5: Memory at df12b000 (32-bit, non-prefetchable) [size=2K] 00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 (rev f0) 00:1f.0 ISA bridge: Intel Corporation Device a2ca 00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller Region 0: Memory at df124000 (32-bit, non-prefetchable) [disabled] [size=16K] 00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio Region 0: Memory at df120000 (64-bit, non-prefetchable) [size=16K] Region 4: Memory at df100000 (64-bit, non-prefetchable) [size=64K] 00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller Region 0: Memory at df12a000 (64-bit, non-prefetchable) [size=256] 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Region 2: Memory at df004000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at df000000 (64-bit, non-prefetchable) [size=16K] </PCI_DEVICE> <PCI_VID_PID> 00:00.0 0600: 8086:3e1f (rev 08) 00:02.0 0300: 8086:3e91 00:08.0 0880: 8086:1911 00:14.0 0c03: 8086:a2af 00:14.2 1180: 8086:a2b1 00:16.0 0780: 8086:a2ba 00:17.0 0106: 8086:a282 00:1c.0 0604: 8086:a294 (rev f0) 00:1f.0 0601: 8086:a2ca 00:1f.2 0580: 8086:a2a1 00:1f.3 0403: 8086:a2f0 00:1f.4 0c05: 8086:a2a3 01:00.0 0200: 10ec:8168 (rev 15) </PCI_VID_PID> <WAKE_VECTOR_INFO> #define WAKE_VECTOR_32 0xB65B0F0CUL #define WAKE_VECTOR_64 0xB65B0F18UL </WAKE_VECTOR_INFO> <RESET_REGISTER_INFO> #define RESET_REGISTER_ADDRESS 0xCF9UL #define RESET_REGISTER_SPACE_ID SPACE_SYSTEM_IO #define RESET_REGISTER_VALUE 0x6U </RESET_REGISTER_INFO> <PM_INFO> #define PM1A_EVT_SPACE_ID SPACE_SYSTEM_IO #define PM1A_EVT_BIT_WIDTH 0x20U #define PM1A_EVT_BIT_OFFSET 0x0U #define PM1A_EVT_ADDRESS 0x1800UL #define PM1A_EVT_ACCESS_SIZE 0x2U #define PM1B_EVT_SPACE_ID SPACE_SYSTEM_IO #define PM1B_EVT_BIT_WIDTH 0x0U #define PM1B_EVT_BIT_OFFSET 0x0U #define PM1B_EVT_ADDRESS 0x0UL #define PM1B_EVT_ACCESS_SIZE 0x2U #define PM1A_CNT_SPACE_ID SPACE_SYSTEM_IO #define PM1A_CNT_BIT_WIDTH 0x10U #define PM1A_CNT_BIT_OFFSET 0x0U #define PM1A_CNT_ADDRESS 0x1804UL #define PM1A_CNT_ACCESS_SIZE 0x2U #define PM1B_CNT_SPACE_ID SPACE_SYSTEM_IO #define PM1B_CNT_BIT_WIDTH 0x0U #define PM1B_CNT_BIT_OFFSET 0x0U #define PM1B_CNT_ADDRESS 0x0UL #define PM1B_CNT_ACCESS_SIZE 0x2U </PM_INFO> <S3_INFO> #define S3_PKG_VAL_PM1A 0x5U #define S3_PKG_VAL_PM1B 0U #define S3_PKG_RESERVED 0x0U </S3_INFO> <S5_INFO> #define S5_PKG_VAL_PM1A 0x7U #define S5_PKG_VAL_PM1B 0U #define S5_PKG_RESERVED 0x0U </S5_INFO> <DRHD_INFO> #define DRHD_COUNT 2U #define DRHD0_DEV_CNT 0x1U #define DRHD0_SEGMENT 0x0U #define DRHD0_FLAGS 0x0U #define DRHD0_REG_BASE 0xFED90000UL #define DRHD0_IGNORE true #define DRHD0_DEVSCOPE0_TYPE 0x1U #define DRHD0_DEVSCOPE0_ID 0x0U #define DRHD0_DEVSCOPE0_BUS 0x0U #define DRHD0_DEVSCOPE0_PATH 0x10U #define DRHD1_DEV_CNT 0x2U #define DRHD1_SEGMENT 0x0U #define DRHD1_FLAGS 0x1U #define DRHD1_REG_BASE 0xFED91000UL #define DRHD1_IGNORE false #define DRHD1_DEVSCOPE0_TYPE 0x3U #define DRHD1_DEVSCOPE0_ID 0x2U #define DRHD1_DEVSCOPE0_BUS 0xf0U #define DRHD1_DEVSCOPE0_PATH 0xf8U #define DRHD1_DEVSCOPE1_TYPE 0x4U #define DRHD1_DEVSCOPE1_ID 0x0U #define DRHD1_DEVSCOPE1_BUS 0x0U #define DRHD1_DEVSCOPE1_PATH 0xf8U </DRHD_INFO> <CPU_BRAND> "Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz" </CPU_BRAND> <CX_INFO> {{SPACE_FFixedHW, 0x00U, 0x00U, 0x00U, 0x00UL}, 0x01U, 0x01U, 0x00U}, / C1 / {{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1816UL}, 0x02U, 0x97U, 0x00U}, / C2 / {{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1819UL}, 0x03U, 0x40AU, 0x00U}, / C3 / </CX_INFO> <PX_INFO> {0xE10UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002400UL, 0x002400UL}, / P0 / {0xD48UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002200UL, 0x002200UL}, / P1 / {0xC80UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002000UL, 0x002000UL}, / P2 / {0xBB8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001E00UL, 0x001E00UL}, / P3 / {0xB54UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001D00UL, 0x001D00UL}, / P4 / {0xA8CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001B00UL, 0x001B00UL}, / P5 / {0x9C4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001900UL, 0x001900UL}, / P6 / {0x8FCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001700UL, 0x001700UL}, / P7 / {0x834UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001500UL, 0x001500UL}, / P8 / {0x76CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001300UL, 0x001300UL}, / P9 / {0x6A4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001100UL, 0x001100UL}, / P10 / {0x5DCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x000F00UL, 0x000F00UL}, / P11 / {0x578UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000E00UL, 0x000E00UL}, / P12 / {0x4B0UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000C00UL, 0x000C00UL}, / P13 / {0x3E8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000A00UL, 0x000A00UL}, / P14 / {0x320UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000800UL, 0x000800UL}, / P15 / </PX_INFO> <CLOS_INFO> clos supported by cache:False clos max:0 </CLOS_INFO> <SYSTEM_RAM_INFO> 00001000-00057fff : System RAM 00059000-0009dfff : System RAM 00100000-3fffffff : System RAM 40400000-ae6bafff : System RAM ae6bd000-b58b7fff : System RAM b6540000-b6549fff : System RAM b6ffe000-b6ffefff : System RAM 100000000-23effffff : System RAM </SYSTEM_RAM_INFO> <BLOCK_DEVICE_INFO> /dev/sda3: TYPE="ext4" /dev/sda4: TYPE="ext4" </BLOCK_DEVICE_INFO> <TTYS_INFO> seri:/dev/ttyS0 type:portio base:0x3F8 irq:4 </TTYS_INFO> <AVAILABLE_IRQ_INFO> 3, 5, 6, 7, 10, 11, 12, 13, 14, 15 </AVAILABLE_IRQ_INFO> <TOTAL_MEM_INFO> 7975552 kB </TOTAL_MEM_INFO> <CPU_PROCESSOR_INFO> 0, 1, 2, 3 </CPU_PROCESSOR_INFO> </acrn-config> sdc.xml <?xml version='1.0' encoding='utf-8'?> <acrn-config board="acer" scenario="sdc"> <vm id="0"> <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order> <name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name> <uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid> <guest_flags desc="Select all applicable flags for the VM" multiselect="true"> <guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag> </guest_flags> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution." /> <memory> <start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa> <size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size> </memory> <os_config> <name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name> <kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type> <kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod> <bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs> </os_config> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id> </vuart> <pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num> <pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs> <board_private> <rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs> <console desc="ttyS console for Linux kernel">/dev/ttyS0</console> <bootargs desc="Specify kernel boot arguments"> rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3 i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1 </bootargs> </board_private> </vm> <vm id="1"> <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order> <uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid> <guest_flags desc="Select all applicable flags for the VM" multiselect="true"> <guest_flag /> </guest_flags> <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU."> <pcpu_id>1</pcpu_id> <pcpu_id>2</pcpu_id> <pcpu_id>3</pcpu_id> </vcpu_affinity> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution." /> <epc_section desc="epc section"> <base desc="SGX EPC section base, must be page aligned">0</base> <size desc="SGX EPC section size in Bytes, must be page aligned">0</size> </epc_section> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." >INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id> </vuart> </vm> <vm configurable="0" desc="specific for Kata" id="2"> <load_order configurable="0" desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM.">POST_LAUNCHED_VM</load_order> <uuid configurable="0" desc="vm uuid">a7ada506-1ab0-4b6b-a0da-e513ca9b8c2f</uuid> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos> <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU."> <pcpu_id>3</pcpu_id> </vcpu_affinity> <epc_section desc="epc section"> <base desc="SGX EPC section base, must be page aligned">0</base> <size desc="SGX EPC section size in Bytes, must be page aligned">0</size> </epc_section> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base configurable="0" desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">COM1_BASE</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base configurable="0" desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">COM2_BASE</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id> </vuart> </vm> </acrn-config> Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails." Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails." Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails."
More All Messages By This Member
Liu, Fuzhong #445 Hi Rajagopal GVT-g patch dedicated for CoffeeLake(873ac6395609 - (2019-10-21 13:34:19 +0800) drivers/i915: Treat COFFEELAKE as KABYLAKE to enable gvt-g on 0x3EA0 GPU device) is merged into in ACRN -kernel on 2019-10-21, but not in Clear Linux E2E kernel; since 4.19 kernel is PV, not accept patch any more. Please have a try with latest acrn-kernel: https://github.com/projectacrn/acrn-kernel If still can’t fix GVT-g issue on your platform with the latest acrn-kernel; please run “lshw” in sos console. And share the info with us. Thanks! BR. Fuzhong toggle quoted message Show quoted text From: acrn-users@... <acrn-users@...> On Behalf Of Rajagopal Aravindan Sent: Saturday, November 23, 2019 9:10 PM To: acrn-users@... Cc: Sun, Victor <victor.sun@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hello Fuzhong, >>Please use the one in Clear build 31670(iasl version 20191018). It worked. I am now able to boot my UOS without GUI on using above iasl. >>Is GVT-g patches included in your SOS kernel? What / how to check ? I guess this would be needed to boot UOS with GUI, right ? Thanks, Rajagopal On Thu, Nov 21, 2019 at 7:27 PM Liu, Fuzhong <fuzhong.liu@...> wrote: Hi Rajagopal, The iasl version is too old; it doesn’t match with acrn-dm of v1.4. Please use the one in Clear build 31670(iasl version 20191018). https://download.clearlinux.org/releases/31670/clear/ Thanks! BR. Fuzhong From: acrn-users@... <acrn-users@...> On Behalf Of Rajagopal Aravindan via Lists.Projectacrn.Org Sent: Thursday, November 21, 2019 9:00 PM To: Liu, Fuzhong <fuzhong.liu@...>; acrn-users@...; Sun, Victor <victor.sun@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hello Victor & Fuzhong, Thanks for pitching in Fuzhong. >>Could you please share the SOS kernel version you used? We tried 2 kernels for SOS, as below ... 4.19.0-22.iot-lts2018-sos - ClearLinux's pre-built kernel 4.19.73-PKT-190919T160721Z-00001-g7a3835deba16 - Built from source https://github.com/projectacrn/acrn-kernel/ >>Anyway, please remove -s 2,pci-gvt -G "$2" \ in your script; and have a try. We ran into the error below (my signature). >>acrn-dm -v DM version is: 1.4-unstable-7b0cafa8-dirty (daily tag:acrn-2019w43.5-140000p), build by root@2019-11-20 10:51:28 [ acrn-2019w43.5-140000p is the daily tag which i picked from release page. Not sure why this gives DM version as unstable!! ] >>/usr/sbin/iasl -v Intel ACPI Component Architecture ASL+ Optimizing Compiler/Disassembler version 20180105 Copyright (c) 2000 - 2018 Intel Corporation Thanks, Rajagopal cpu1 online=0 cpu2 online=0 cpu3 online=0 SW_LOAD: get kernel path /lib/modules/kernel/default-iot-lts2018 SW_LOAD: get ovmf path /usr/share/acrn/bios/OVMF.fd, size 0x200000 pm by vuart node-index = 0 logger: name=console, level=4 logger: name=kmsg, level=3 logger: name=disk, level=5 vm_create: vm1 VHM api version 1.0 vm_setup_memory: size=0x80000000 open hugetlbfs file /run/hugepage/acrn/huge_lv1/vm1/D279543825D611E8864ECB7A18B34643 open hugetlbfs file /run/hugepage/acrn/huge_lv2/vm1/D279543825D611E8864ECB7A18B34643 level 0 free/need pages:1/1 page size:0x200000 level 1 free/need pages:2/2 page size:0x40000000 try to setup hugepage with: level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0 level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0 total_size 0x180000000 mmap ptr 0x0x7f25be079000 -> baseaddr 0x0x7f25c0000000 mmap 0x80000000@0x7f25c0000000 touch 2 pages with pagesz 0x40000000 mmap 0x200000@0x7f26bfe00000 touch 1 pages with pagesz 0x200000 really setup hugepage with: level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0 level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0 vm_init_vdevs pci init hostbridge pci init lpc pci init virtio-blk pci init virtio-net pci init virtio-console pci init virtio-hyper_dmabuf pci init virtio-rnd tpm: init_vtpm2:Invalid socket path! polling 38... Listening 38... /tmp/dm.XBeZ4MB 46: [0004] Address : fec00000 Error 6303 - ^ Integer too large for target (00000000FEC00000 - max 1 bytes) /tmp/dm.XBeZ4MB 58: [0001] Subtable Type : 02 Error 6302 - Flag value is too large ^ (Maximum 1 bit) /tmp/dm.XBeZ4MB 62: [0004] Interrupt : 00000009 Error 6302 - Flag value is too large ^ (Maximum 2 bit) /tmp/dm.XBeZ4MB 63: [0002] Flags (decoded below) : 000D Error 6302 - Flag value is too large ^ (Maximum 2 bit) acpi_build failed, error=-1 pci deinit hostbridge pci deinit lpc pci deinit virtio-blk pci deinit virtio-net vtnet tx thread closing... pci deinit virtio-console pci deinit virtio-hyper_dmabuf pci deinit virtio-rnd mngr_client_new: Failed to accept from fd 38, err: Invalid argument Stop listening 38... Stop polling 38... From: acrn-users@... <acrn-users@...> on behalf of Liu, Fuzhong <fuzhong.liu@...> Sent: Thursday, November 21, 2019 4:13 PM To: acrn-users@... <acrn-users@...>; Sun, Victor <victor.sun@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hi Rajagopal Is GVT-g patches included in your SOS kernel? Could you please share the SOS kernel version you used? Anyway, please remove -s 2,pci-gvt -G "$2" \ in your script; and have a try. If the issue is still there, please run following cmd in sos: acrn-dm -v /usr/sbin/iasl -v Thanks! BR. Fuzhong From: acrn-users@... <acrn-users@...> On Behalf Of Rajagopal Aravindan via Lists.Projectacrn.Org Sent: Thursday, November 21, 2019 3:40 PM To: Sun, Victor <victor.sun@...>; acrn-users@... Subject: Re: [acrn-users] ACRN on CoffeeLake Hello Victor, >>Please post your UOS launch script. PFB, my signature. Thanks, Rajagopal UOS launch script #!/bin/bash # Copyright (C) 2019 Intel Corporation. # SPDX-License-Identifier: BSD-3-Clause offline_path="/sys/class/vhm/acrn_vhm" # Check the device file of /dev/acrn_hsm to determine the offline_path if [ -e "/dev/acrn_hsm" ]; then offline_path="/sys/class/acrn/acrn_hsm" fi function run_container() { vm_name=vm1 config_src="/usr/share/acrn/samples/nuc/runC.json" shell="/usr/share/acrn/conf/add/$vm_name.sh" arg_file="/usr/share/acrn/conf/add/$vm_name.args" runc_bundle="/usr/share/acrn/conf/add/runc/$vm_name" rootfs_dir="/usr/share/acrn/conf/add/runc/rootfs" config_dst="$runc_bundle/config.json" input=$(runc list -f table \| awk '{print $1}''{print $3}') arr=(${input// / }) for((i=0;i<${#arr[@]};i++)) do if [ "$vm_name" = "${arr[$i]}" ]; then if [ "running" = "${arr[$i+1]}" ]; then echo "runC instance ${arr[$i]} is running" exit else runc kill ${arr[$i]} runc delete ${arr[$i]} fi fi done vmsts=$(acrnctl list) vms=(${vmsts// / }) for((i=0;i<${#vms[@]};i++)) do if [ "$vm_name" = "${vms[$i]}" ]; then if [ "stopped" != "${vms[$i+1]}" ]; then echo "Uos ${vms[$i]} ${vms[$i+1]}" acrnctl stop ${vms[$i]} fi fi done if [ ! -f "$shell" ]; then echo "Pls add the vm at first!" exit fi if [ ! -f "$arg_file" ]; then echo "Pls add the vm args!" exit fi if [ ! -d "$rootfs_dir" ]; then mkdir -p "$rootfs_dir" fi if [ ! -d "$runc_bundle" ]; then mkdir -p "$runc_bundle" fi if [ ! -f "$config_dst" ]; then cp "$config_src" "$config_dst" args=$(sed '{s/-C//g;s/^[ \t]//g;s/^/\"/;s/ /\",\"/g;s/$/\"/}' ${arg_file})* sed -i "s\|\"sh\"\|\"$shell\", $args\|" $config_dst fi runc run --bundle $runc_bundle -d $vm_name echo "The runC container is running in backgroud" echo "'#runc exec <vmname> bash' to login the container bash" exit } function launch_clear() { mac=$(cat /sys/class/net/e/address)* vm_name=vm$1 mac_seed=${mac:9:8}-${vm_name} #check if the vm is running or not vm_ps=$(pgrep -a -f acrn-dm) result=$(echo $vm_ps \| grep -w "${vm_name}") if [[ "$result" != "" ]]; then echo "$vm_name is running, can't create twice!" exit fi #logger_setting, format: logger_name,level; like following logger_setting="--logger_setting console,level=4;kmsg,level=3;disk,level=5" #for pm by vuart setting pm_channel="--pm_notify_channel uart " pm_by_vuart="--pm_by_vuart pty,/run/acrn/life_mngr_"$vm_name pm_vuart_node=" -s 1:0,lpc -l com2,/run/acrn/life_mngr_"$vm_name #for memsize setting mem_size=2048M acrn-dm -A -m $mem_size -s 0:0,hostbridge \ -s 2,pci-gvt -G "$2" \ -s 5,virtio-console,@stdio:stdio_port \ -s 6,virtio-hyper_dmabuf \ -s 3,virtio-blk,/home/ghost/acrn_new/uos/clear-26440-kvm.img \ -k /lib/modules/kernel/default-iot-lts2018 \ -s 4,virtio-net,tap0 \ -s 7,virtio-rnd \ --ovmf /usr/share/acrn/bios/OVMF.fd \ $pm_channel $pm_by_vuart $pm_vuart_node \ $logger_setting \ --mac_seed $mac_seed \ $vm_name } #add following cmdline to grub.cfg and update kernel #when launching LaaG by OVMF #rw rootwait maxcpus=1 nohpet console=tty0 console=hvc0 #console=ttyS0 no_timer_check ignore_loglevel #log_buf_len=16M consoleblank=0 #tsc=reliable i915.avail_planes_per_pipe="64 448 8" #i915.enable_hangcheck=0 i915.nuclear_pageflip=1 #i915.enable_guc_loading=0 #i915.enable_guc_submission=0 i915.enable_guc=0 # offline SOS CPUs except BSP before launch UOS for i in `ls -d /sys/devices/system/cpu/cpu[1-99]`; do online=`cat $i/online` idx=`echo $i \| tr -cd "[1-99]"` echo cpu$idx online=$online if [ "$online" = "1" ]; then echo 0 > $i/online # during boot time, cpu hotplug may be disabled by pci_device_probe during a pci module insmod while [ "$online" = "1" ]; do sleep 1 echo 0 > $i/online online=`cat $i/online` done echo $idx > ${offline_path}/offline_cpu fi done if [ "$1" = "-C" ];then echo "runc_container" run_container else launch_clear 1 "64 448 8" 0x070F00 fi From: acrn-users@... <acrn-users@...> on behalf of Victor Sun <victor.sun@...> Sent: Thursday, November 21, 2019 11:18 AM To: acrn-users@... <acrn-users@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hi Rajagopal, Please post your UOS launch script. BR, Victor On 11/21/2019 1:41 PM, Rajagopal Aravindan via Lists.Projectacrn.Org wrote: Hello Victor, W.r.t the subject, we were able to get ACRN to boot into SOS. However, when trying to start UOS we run into the below error GVT: open /sys/kernel/gvt/control/create_gvt_instance failed GVT: init failed : No such file or directory pci pci-gvt init failed I guess its related to graphics virtualization but not able to get past that. Any inputs on this, please ? PFB (my signature) the board & sdc xmls. Thanks, Rajagopal board.xml <acrn-config board="acer"> <BIOS_INFO> BIOS Information Vendor: Acer Version: P21-A1E Release Date: 04/12/2019 BIOS Revision: 5.12 </BIOS_INFO> <BASE_BOARD_INFO> Base Board Information Manufacturer: Acer Product Name: H310CH5-M23 Version: P21-A1E </BASE_BOARD_INFO> <PCI_DEVICE> 00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 08) 00:02.0 VGA compatible controller: Intel Corporation 8th Gen Core Processor Gaussian Mixture Model Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] 00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model Region 0: Memory at df12f000 (64-bit, non-prefetchable) [disabled] [size=4K] 00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller Region 0: Memory at df110000 (64-bit, non-prefetchable) [size=64K] 00:14.2 Signal processing controller: Intel Corporation 200 Series PCH Thermal Subsystem Region 0: Memory at df12e000 (64-bit, non-prefetchable) [size=4K] 00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1 Region 0: Memory at df12d000 (64-bit, non-prefetchable) [size=4K] 00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode] Region 0: Memory at df128000 (32-bit, non-prefetchable) [size=8K] Region 1: Memory at df12c000 (32-bit, non-prefetchable) [size=256] Region 5: Memory at df12b000 (32-bit, non-prefetchable) [size=2K] 00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 (rev f0) 00:1f.0 ISA bridge: Intel Corporation Device a2ca 00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller Region 0: Memory at df124000 (32-bit, non-prefetchable) [disabled] [size=16K] 00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio Region 0: Memory at df120000 (64-bit, non-prefetchable) [size=16K] Region 4: Memory at df100000 (64-bit, non-prefetchable) [size=64K] 00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller Region 0: Memory at df12a000 (64-bit, non-prefetchable) [size=256] 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Region 2: Memory at df004000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at df000000 (64-bit, non-prefetchable) [size=16K] </PCI_DEVICE> <PCI_VID_PID> 00:00.0 0600: 8086:3e1f (rev 08) 00:02.0 0300: 8086:3e91 00:08.0 0880: 8086:1911 00:14.0 0c03: 8086:a2af 00:14.2 1180: 8086:a2b1 00:16.0 0780: 8086:a2ba 00:17.0 0106: 8086:a282 00:1c.0 0604: 8086:a294 (rev f0) 00:1f.0 0601: 8086:a2ca 00:1f.2 0580: 8086:a2a1 00:1f.3 0403: 8086:a2f0 00:1f.4 0c05: 8086:a2a3 01:00.0 0200: 10ec:8168 (rev 15) </PCI_VID_PID> <WAKE_VECTOR_INFO> #define WAKE_VECTOR_32 0xB65B0F0CUL #define WAKE_VECTOR_64 0xB65B0F18UL </WAKE_VECTOR_INFO> <RESET_REGISTER_INFO> #define RESET_REGISTER_ADDRESS 0xCF9UL #define RESET_REGISTER_SPACE_ID SPACE_SYSTEM_IO #define RESET_REGISTER_VALUE 0x6U </RESET_REGISTER_INFO> <PM_INFO> #define PM1A_EVT_SPACE_ID SPACE_SYSTEM_IO #define PM1A_EVT_BIT_WIDTH 0x20U #define PM1A_EVT_BIT_OFFSET 0x0U #define PM1A_EVT_ADDRESS 0x1800UL #define PM1A_EVT_ACCESS_SIZE 0x2U #define PM1B_EVT_SPACE_ID SPACE_SYSTEM_IO #define PM1B_EVT_BIT_WIDTH 0x0U #define PM1B_EVT_BIT_OFFSET 0x0U #define PM1B_EVT_ADDRESS 0x0UL #define PM1B_EVT_ACCESS_SIZE 0x2U #define PM1A_CNT_SPACE_ID SPACE_SYSTEM_IO #define PM1A_CNT_BIT_WIDTH 0x10U #define PM1A_CNT_BIT_OFFSET 0x0U #define PM1A_CNT_ADDRESS 0x1804UL #define PM1A_CNT_ACCESS_SIZE 0x2U #define PM1B_CNT_SPACE_ID SPACE_SYSTEM_IO #define PM1B_CNT_BIT_WIDTH 0x0U #define PM1B_CNT_BIT_OFFSET 0x0U #define PM1B_CNT_ADDRESS 0x0UL #define PM1B_CNT_ACCESS_SIZE 0x2U </PM_INFO> <S3_INFO> #define S3_PKG_VAL_PM1A 0x5U #define S3_PKG_VAL_PM1B 0U #define S3_PKG_RESERVED 0x0U </S3_INFO> <S5_INFO> #define S5_PKG_VAL_PM1A 0x7U #define S5_PKG_VAL_PM1B 0U #define S5_PKG_RESERVED 0x0U </S5_INFO> <DRHD_INFO> #define DRHD_COUNT 2U #define DRHD0_DEV_CNT 0x1U #define DRHD0_SEGMENT 0x0U #define DRHD0_FLAGS 0x0U #define DRHD0_REG_BASE 0xFED90000UL #define DRHD0_IGNORE true #define DRHD0_DEVSCOPE0_TYPE 0x1U #define DRHD0_DEVSCOPE0_ID 0x0U #define DRHD0_DEVSCOPE0_BUS 0x0U #define DRHD0_DEVSCOPE0_PATH 0x10U #define DRHD1_DEV_CNT 0x2U #define DRHD1_SEGMENT 0x0U #define DRHD1_FLAGS 0x1U #define DRHD1_REG_BASE 0xFED91000UL #define DRHD1_IGNORE false #define DRHD1_DEVSCOPE0_TYPE 0x3U #define DRHD1_DEVSCOPE0_ID 0x2U #define DRHD1_DEVSCOPE0_BUS 0xf0U #define DRHD1_DEVSCOPE0_PATH 0xf8U #define DRHD1_DEVSCOPE1_TYPE 0x4U #define DRHD1_DEVSCOPE1_ID 0x0U #define DRHD1_DEVSCOPE1_BUS 0x0U #define DRHD1_DEVSCOPE1_PATH 0xf8U </DRHD_INFO> <CPU_BRAND> "Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz" </CPU_BRAND> <CX_INFO> {{SPACE_FFixedHW, 0x00U, 0x00U, 0x00U, 0x00UL}, 0x01U, 0x01U, 0x00U}, / C1 / {{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1816UL}, 0x02U, 0x97U, 0x00U}, / C2 / {{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1819UL}, 0x03U, 0x40AU, 0x00U}, / C3 / </CX_INFO> <PX_INFO> {0xE10UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002400UL, 0x002400UL}, / P0 / {0xD48UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002200UL, 0x002200UL}, / P1 / {0xC80UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002000UL, 0x002000UL}, / P2 / {0xBB8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001E00UL, 0x001E00UL}, / P3 / {0xB54UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001D00UL, 0x001D00UL}, / P4 / {0xA8CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001B00UL, 0x001B00UL}, / P5 / {0x9C4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001900UL, 0x001900UL}, / P6 / {0x8FCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001700UL, 0x001700UL}, / P7 / {0x834UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001500UL, 0x001500UL}, / P8 / {0x76CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001300UL, 0x001300UL}, / P9 / {0x6A4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001100UL, 0x001100UL}, / P10 / {0x5DCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x000F00UL, 0x000F00UL}, / P11 / {0x578UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000E00UL, 0x000E00UL}, / P12 / {0x4B0UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000C00UL, 0x000C00UL}, / P13 / {0x3E8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000A00UL, 0x000A00UL}, / P14 / {0x320UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000800UL, 0x000800UL}, / P15 / </PX_INFO> <CLOS_INFO> clos supported by cache:False clos max:0 </CLOS_INFO> <SYSTEM_RAM_INFO> 00001000-00057fff : System RAM 00059000-0009dfff : System RAM 00100000-3fffffff : System RAM 40400000-ae6bafff : System RAM ae6bd000-b58b7fff : System RAM b6540000-b6549fff : System RAM b6ffe000-b6ffefff : System RAM 100000000-23effffff : System RAM </SYSTEM_RAM_INFO> <BLOCK_DEVICE_INFO> /dev/sda3: TYPE="ext4" /dev/sda4: TYPE="ext4" </BLOCK_DEVICE_INFO> <TTYS_INFO> seri:/dev/ttyS0 type:portio base:0x3F8 irq:4 </TTYS_INFO> <AVAILABLE_IRQ_INFO> 3, 5, 6, 7, 10, 11, 12, 13, 14, 15 </AVAILABLE_IRQ_INFO> <TOTAL_MEM_INFO> 7975552 kB </TOTAL_MEM_INFO> <CPU_PROCESSOR_INFO> 0, 1, 2, 3 </CPU_PROCESSOR_INFO> </acrn-config> sdc.xml <?xml version='1.0' encoding='utf-8'?> <acrn-config board="acer" scenario="sdc"> <vm id="0"> <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order> <name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name> <uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid> <guest_flags desc="Select all applicable flags for the VM" multiselect="true"> <guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag> </guest_flags> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution." /> <memory> <start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa> <size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size> </memory> <os_config> <name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name> <kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type> <kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod> <bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs> </os_config> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id> </vuart> <pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num> <pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs> <board_private> <rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs> <console desc="ttyS console for Linux kernel">/dev/ttyS0</console> <bootargs desc="Specify kernel boot arguments"> rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3 i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1 </bootargs> </board_private> </vm> <vm id="1"> <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order> <uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid> <guest_flags desc="Select all applicable flags for the VM" multiselect="true"> <guest_flag /> </guest_flags> <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU."> <pcpu_id>1</pcpu_id> <pcpu_id>2</pcpu_id> <pcpu_id>3</pcpu_id> </vcpu_affinity> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution." /> <epc_section desc="epc section"> <base desc="SGX EPC section base, must be page aligned">0</base> <size desc="SGX EPC section size in Bytes, must be page aligned">0</size> </epc_section> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." >INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id> </vuart> </vm> <vm configurable="0" desc="specific for Kata" id="2"> <load_order configurable="0" desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM.">POST_LAUNCHED_VM</load_order> <uuid configurable="0" desc="vm uuid">a7ada506-1ab0-4b6b-a0da-e513ca9b8c2f</uuid> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos> <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU."> <pcpu_id>3</pcpu_id> </vcpu_affinity> <epc_section desc="epc section"> <base desc="SGX EPC section base, must be page aligned">0</base> <size desc="SGX EPC section size in Bytes, must be page aligned">0</size> </epc_section> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base configurable="0" desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">COM1_BASE</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base configurable="0" desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">COM2_BASE</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id> </vuart> </vm> </acrn-config> Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails." Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails." Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails."
More All Messages By This Member
Wang, Hongbo #446 More inputs to clarify kernel difference between acrn-kernel (https://github.com/projectacrn/acrn-kernel) and Clear Linux’s E2E kernel: Clear Linux E2E kernel is the official and release version for ACRN and E2E (ACRN+Service VM+Guest VM) ACRN-kernel in Github is used as ACRN’s development kernel not for official release. *Best regards.* *Hongbo* Tel: +86-21-6116 7445 MP: +86-1364 1793 689 Mail: hongbo.wang@... toggle quoted message Show quoted text From: acrn-users@... <acrn-users@...> On Behalf Of Liu, Fuzhong Sent: 2019年11月24日 9:25 To: acrn-users@... Cc: Sun, Victor <victor.sun@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hi Rajagopal GVT-g patch dedicated for CoffeeLake(873ac6395609 - (2019-10-21 13:34:19 +0800) drivers/i915: Treat COFFEELAKE as KABYLAKE to enable gvt-g on 0x3EA0 GPU device) is merged into in ACRN -kernel on 2019-10-21, but not in Clear Linux E2E kernel; since 4.19 kernel is PV, not accept patch any more. Please have a try with latest acrn-kernel: https://github.com/projectacrn/acrn-kernel If still can’t fix GVT-g issue on your platform with the latest acrn-kernel; please run “lshw” in sos console. And share the info with us. Thanks! BR. Fuzhong From: acrn-users@... <acrn-users@...> On Behalf Of Rajagopal Aravindan Sent: Saturday, November 23, 2019 9:10 PM To: acrn-users@... Cc: Sun, Victor <victor.sun@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hello Fuzhong, >>Please use the one in Clear build 31670(iasl version 20191018). It worked. I am now able to boot my UOS without GUI on using above iasl. >>Is GVT-g patches included in your SOS kernel? What / how to check ? I guess this would be needed to boot UOS with GUI, right ? Thanks, Rajagopal On Thu, Nov 21, 2019 at 7:27 PM Liu, Fuzhong <fuzhong.liu@...> wrote: Hi Rajagopal, The iasl version is too old; it doesn’t match with acrn-dm of v1.4. Please use the one in Clear build 31670(iasl version 20191018). https://download.clearlinux.org/releases/31670/clear/ Thanks! BR. Fuzhong From: acrn-users@... <acrn-users@...> On Behalf Of Rajagopal Aravindan via Lists.Projectacrn.Org Sent: Thursday, November 21, 2019 9:00 PM To: Liu, Fuzhong <fuzhong.liu@...>; acrn-users@...; Sun, Victor <victor.sun@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hello Victor & Fuzhong, Thanks for pitching in Fuzhong. >>Could you please share the SOS kernel version you used? We tried 2 kernels for SOS, as below ... 4.19.0-22.iot-lts2018-sos - ClearLinux's pre-built kernel 4.19.73-PKT-190919T160721Z-00001-g7a3835deba16 - Built from source https://github.com/projectacrn/acrn-kernel/ >>Anyway, please remove -s 2,pci-gvt -G "$2" \ in your script; and have a try. We ran into the error below (my signature). >>acrn-dm -v DM version is: 1.4-unstable-7b0cafa8-dirty (daily tag:acrn-2019w43.5-140000p), build by root@2019-11-20 10:51:28 [ acrn-2019w43.5-140000p is the daily tag which i picked from release page. Not sure why this gives DM version as unstable!! ] >>/usr/sbin/iasl -v Intel ACPI Component Architecture ASL+ Optimizing Compiler/Disassembler version 20180105 Copyright (c) 2000 - 2018 Intel Corporation Thanks, Rajagopal cpu1 online=0 cpu2 online=0 cpu3 online=0 SW_LOAD: get kernel path /lib/modules/kernel/default-iot-lts2018 SW_LOAD: get ovmf path /usr/share/acrn/bios/OVMF.fd, size 0x200000 pm by vuart node-index = 0 logger: name=console, level=4 logger: name=kmsg, level=3 logger: name=disk, level=5 vm_create: vm1 VHM api version 1.0 vm_setup_memory: size=0x80000000 open hugetlbfs file /run/hugepage/acrn/huge_lv1/vm1/D279543825D611E8864ECB7A18B34643 open hugetlbfs file /run/hugepage/acrn/huge_lv2/vm1/D279543825D611E8864ECB7A18B34643 level 0 free/need pages:1/1 page size:0x200000 level 1 free/need pages:2/2 page size:0x40000000 try to setup hugepage with: level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0 level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0 total_size 0x180000000 mmap ptr 0x0x7f25be079000 -> baseaddr 0x0x7f25c0000000 mmap 0x80000000@0x7f25c0000000 touch 2 pages with pagesz 0x40000000 mmap 0x200000@0x7f26bfe00000 touch 1 pages with pagesz 0x200000 really setup hugepage with: level 0 - lowmem 0x0, biosmem 0x200000, highmem 0x0 level 1 - lowmem 0x80000000, biosmem 0x0, highmem 0x0 vm_init_vdevs pci init hostbridge pci init lpc pci init virtio-blk pci init virtio-net pci init virtio-console pci init virtio-hyper_dmabuf pci init virtio-rnd tpm: init_vtpm2:Invalid socket path! polling 38... Listening 38... /tmp/dm.XBeZ4MB 46: [0004] Address : fec00000 Error 6303 - ^ Integer too large for target (00000000FEC00000 - max 1 bytes) /tmp/dm.XBeZ4MB 58: [0001] Subtable Type : 02 Error 6302 - Flag value is too large ^ (Maximum 1 bit) /tmp/dm.XBeZ4MB 62: [0004] Interrupt : 00000009 Error 6302 - Flag value is too large ^ (Maximum 2 bit) /tmp/dm.XBeZ4MB 63: [0002] Flags (decoded below) : 000D Error 6302 - Flag value is too large ^ (Maximum 2 bit) acpi_build failed, error=-1 pci deinit hostbridge pci deinit lpc pci deinit virtio-blk pci deinit virtio-net vtnet tx thread closing... pci deinit virtio-console pci deinit virtio-hyper_dmabuf pci deinit virtio-rnd mngr_client_new: Failed to accept from fd 38, err: Invalid argument Stop listening 38... Stop polling 38... From: acrn-users@... <acrn-users@...> on behalf of Liu, Fuzhong <fuzhong.liu@...> Sent: Thursday, November 21, 2019 4:13 PM To: acrn-users@... <acrn-users@...>; Sun, Victor <victor.sun@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hi Rajagopal Is GVT-g patches included in your SOS kernel? Could you please share the SOS kernel version you used? Anyway, please remove -s 2,pci-gvt -G "$2" \ in your script; and have a try. If the issue is still there, please run following cmd in sos: acrn-dm -v /usr/sbin/iasl -v Thanks! BR. Fuzhong From: acrn-users@... <acrn-users@...> On Behalf Of Rajagopal Aravindan via Lists.Projectacrn.Org Sent: Thursday, November 21, 2019 3:40 PM To: Sun, Victor <victor.sun@...>; acrn-users@... Subject: Re: [acrn-users] ACRN on CoffeeLake Hello Victor, >>Please post your UOS launch script. PFB, my signature. Thanks, Rajagopal UOS launch script #!/bin/bash # Copyright (C) 2019 Intel Corporation. # SPDX-License-Identifier: BSD-3-Clause offline_path="/sys/class/vhm/acrn_vhm" # Check the device file of /dev/acrn_hsm to determine the offline_path if [ -e "/dev/acrn_hsm" ]; then offline_path="/sys/class/acrn/acrn_hsm" fi function run_container() { vm_name=vm1 config_src="/usr/share/acrn/samples/nuc/runC.json" shell="/usr/share/acrn/conf/add/$vm_name.sh" arg_file="/usr/share/acrn/conf/add/$vm_name.args" runc_bundle="/usr/share/acrn/conf/add/runc/$vm_name" rootfs_dir="/usr/share/acrn/conf/add/runc/rootfs" config_dst="$runc_bundle/config.json" input=$(runc list -f table \| awk '{print $1}''{print $3}') arr=(${input// / }) for((i=0;i<${#arr[@]};i++)) do if [ "$vm_name" = "${arr[$i]}" ]; then if [ "running" = "${arr[$i+1]}" ]; then echo "runC instance ${arr[$i]} is running" exit else runc kill ${arr[$i]} runc delete ${arr[$i]} fi fi done vmsts=$(acrnctl list) vms=(${vmsts// / }) for((i=0;i<${#vms[@]};i++)) do if [ "$vm_name" = "${vms[$i]}" ]; then if [ "stopped" != "${vms[$i+1]}" ]; then echo "Uos ${vms[$i]} ${vms[$i+1]}" acrnctl stop ${vms[$i]} fi fi done if [ ! -f "$shell" ]; then echo "Pls add the vm at first!" exit fi if [ ! -f "$arg_file" ]; then echo "Pls add the vm args!" exit fi if [ ! -d "$rootfs_dir" ]; then mkdir -p "$rootfs_dir" fi if [ ! -d "$runc_bundle" ]; then mkdir -p "$runc_bundle" fi if [ ! -f "$config_dst" ]; then cp "$config_src" "$config_dst" args=$(sed '{s/-C//g;s/^[ \t]//g;s/^/\"/;s/ /\",\"/g;s/$/\"/}' ${arg_file})* sed -i "s\|\"sh\"\|\"$shell\", $args\|" $config_dst fi runc run --bundle $runc_bundle -d $vm_name echo "The runC container is running in backgroud" echo "'#runc exec <vmname> bash' to login the container bash" exit } function launch_clear() { mac=$(cat /sys/class/net/e/address)* vm_name=vm$1 mac_seed=${mac:9:8}-${vm_name} #check if the vm is running or not vm_ps=$(pgrep -a -f acrn-dm) result=$(echo $vm_ps \| grep -w "${vm_name}") if [[ "$result" != "" ]]; then echo "$vm_name is running, can't create twice!" exit fi #logger_setting, format: logger_name,level; like following logger_setting="--logger_setting console,level=4;kmsg,level=3;disk,level=5" #for pm by vuart setting pm_channel="--pm_notify_channel uart " pm_by_vuart="--pm_by_vuart pty,/run/acrn/life_mngr_"$vm_name pm_vuart_node=" -s 1:0,lpc -l com2,/run/acrn/life_mngr_"$vm_name #for memsize setting mem_size=2048M acrn-dm -A -m $mem_size -s 0:0,hostbridge \ -s 2,pci-gvt -G "$2" \ -s 5,virtio-console,@stdio:stdio_port \ -s 6,virtio-hyper_dmabuf \ -s 3,virtio-blk,/home/ghost/acrn_new/uos/clear-26440-kvm.img \ -k /lib/modules/kernel/default-iot-lts2018 \ -s 4,virtio-net,tap0 \ -s 7,virtio-rnd \ --ovmf /usr/share/acrn/bios/OVMF.fd \ $pm_channel $pm_by_vuart $pm_vuart_node \ $logger_setting \ --mac_seed $mac_seed \ $vm_name } #add following cmdline to grub.cfg and update kernel #when launching LaaG by OVMF #rw rootwait maxcpus=1 nohpet console=tty0 console=hvc0 #console=ttyS0 no_timer_check ignore_loglevel #log_buf_len=16M consoleblank=0 #tsc=reliable i915.avail_planes_per_pipe="64 448 8" #i915.enable_hangcheck=0 i915.nuclear_pageflip=1 #i915.enable_guc_loading=0 #i915.enable_guc_submission=0 i915.enable_guc=0 # offline SOS CPUs except BSP before launch UOS for i in `ls -d /sys/devices/system/cpu/cpu[1-99]`; do online=`cat $i/online` idx=`echo $i \| tr -cd "[1-99]"` echo cpu$idx online=$online if [ "$online" = "1" ]; then echo 0 > $i/online # during boot time, cpu hotplug may be disabled by pci_device_probe during a pci module insmod while [ "$online" = "1" ]; do sleep 1 echo 0 > $i/online online=`cat $i/online` done echo $idx > ${offline_path}/offline_cpu fi done if [ "$1" = "-C" ];then echo "runc_container" run_container else launch_clear 1 "64 448 8" 0x070F00 fi From: acrn-users@... <acrn-users@...> on behalf of Victor Sun <victor.sun@...> Sent: Thursday, November 21, 2019 11:18 AM To: acrn-users@... <acrn-users@...> Subject: Re: [acrn-users] ACRN on CoffeeLake Hi Rajagopal, Please post your UOS launch script. BR, Victor On 11/21/2019 1:41 PM, Rajagopal Aravindan via Lists.Projectacrn.Org wrote: Hello Victor, W.r.t the subject, we were able to get ACRN to boot into SOS. However, when trying to start UOS we run into the below error GVT: open /sys/kernel/gvt/control/create_gvt_instance failed GVT: init failed : No such file or directory pci pci-gvt init failed I guess its related to graphics virtualization but not able to get past that. Any inputs on this, please ? PFB (my signature) the board & sdc xmls. Thanks, Rajagopal board.xml <acrn-config board="acer"> <BIOS_INFO> BIOS Information Vendor: Acer Version: P21-A1E Release Date: 04/12/2019 BIOS Revision: 5.12 </BIOS_INFO> <BASE_BOARD_INFO> Base Board Information Manufacturer: Acer Product Name: H310CH5-M23 Version: P21-A1E </BASE_BOARD_INFO> <PCI_DEVICE> 00:00.0 Host bridge: Intel Corporation 8th Gen Core Processor Host Bridge/DRAM Registers (rev 08) 00:02.0 VGA compatible controller: Intel Corporation 8th Gen Core Processor Gaussian Mixture Model Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] 00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model Region 0: Memory at df12f000 (64-bit, non-prefetchable) [disabled] [size=4K] 00:14.0 USB controller: Intel Corporation 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller Region 0: Memory at df110000 (64-bit, non-prefetchable) [size=64K] 00:14.2 Signal processing controller: Intel Corporation 200 Series PCH Thermal Subsystem Region 0: Memory at df12e000 (64-bit, non-prefetchable) [size=4K] 00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1 Region 0: Memory at df12d000 (64-bit, non-prefetchable) [size=4K] 00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode] Region 0: Memory at df128000 (32-bit, non-prefetchable) [size=8K] Region 1: Memory at df12c000 (32-bit, non-prefetchable) [size=256] Region 5: Memory at df12b000 (32-bit, non-prefetchable) [size=2K] 00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 (rev f0) 00:1f.0 ISA bridge: Intel Corporation Device a2ca 00:1f.2 Memory controller: Intel Corporation 200 Series/Z370 Chipset Family Power Management Controller Region 0: Memory at df124000 (32-bit, non-prefetchable) [disabled] [size=16K] 00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio Region 0: Memory at df120000 (64-bit, non-prefetchable) [size=16K] Region 4: Memory at df100000 (64-bit, non-prefetchable) [size=64K] 00:1f.4 SMBus: Intel Corporation 200 Series/Z370 Chipset Family SMBus Controller Region 0: Memory at df12a000 (64-bit, non-prefetchable) [size=256] 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15) Region 2: Memory at df004000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at df000000 (64-bit, non-prefetchable) [size=16K] </PCI_DEVICE> <PCI_VID_PID> 00:00.0 0600: 8086:3e1f (rev 08) 00:02.0 0300: 8086:3e91 00:08.0 0880: 8086:1911 00:14.0 0c03: 8086:a2af 00:14.2 1180: 8086:a2b1 00:16.0 0780: 8086:a2ba 00:17.0 0106: 8086:a282 00:1c.0 0604: 8086:a294 (rev f0) 00:1f.0 0601: 8086:a2ca 00:1f.2 0580: 8086:a2a1 00:1f.3 0403: 8086:a2f0 00:1f.4 0c05: 8086:a2a3 01:00.0 0200: 10ec:8168 (rev 15) </PCI_VID_PID> <WAKE_VECTOR_INFO> #define WAKE_VECTOR_32 0xB65B0F0CUL #define WAKE_VECTOR_64 0xB65B0F18UL </WAKE_VECTOR_INFO> <RESET_REGISTER_INFO> #define RESET_REGISTER_ADDRESS 0xCF9UL #define RESET_REGISTER_SPACE_ID SPACE_SYSTEM_IO #define RESET_REGISTER_VALUE 0x6U </RESET_REGISTER_INFO> <PM_INFO> #define PM1A_EVT_SPACE_ID SPACE_SYSTEM_IO #define PM1A_EVT_BIT_WIDTH 0x20U #define PM1A_EVT_BIT_OFFSET 0x0U #define PM1A_EVT_ADDRESS 0x1800UL #define PM1A_EVT_ACCESS_SIZE 0x2U #define PM1B_EVT_SPACE_ID SPACE_SYSTEM_IO #define PM1B_EVT_BIT_WIDTH 0x0U #define PM1B_EVT_BIT_OFFSET 0x0U #define PM1B_EVT_ADDRESS 0x0UL #define PM1B_EVT_ACCESS_SIZE 0x2U #define PM1A_CNT_SPACE_ID SPACE_SYSTEM_IO #define PM1A_CNT_BIT_WIDTH 0x10U #define PM1A_CNT_BIT_OFFSET 0x0U #define PM1A_CNT_ADDRESS 0x1804UL #define PM1A_CNT_ACCESS_SIZE 0x2U #define PM1B_CNT_SPACE_ID SPACE_SYSTEM_IO #define PM1B_CNT_BIT_WIDTH 0x0U #define PM1B_CNT_BIT_OFFSET 0x0U #define PM1B_CNT_ADDRESS 0x0UL #define PM1B_CNT_ACCESS_SIZE 0x2U </PM_INFO> <S3_INFO> #define S3_PKG_VAL_PM1A 0x5U #define S3_PKG_VAL_PM1B 0U #define S3_PKG_RESERVED 0x0U </S3_INFO> <S5_INFO> #define S5_PKG_VAL_PM1A 0x7U #define S5_PKG_VAL_PM1B 0U #define S5_PKG_RESERVED 0x0U </S5_INFO> <DRHD_INFO> #define DRHD_COUNT 2U #define DRHD0_DEV_CNT 0x1U #define DRHD0_SEGMENT 0x0U #define DRHD0_FLAGS 0x0U #define DRHD0_REG_BASE 0xFED90000UL #define DRHD0_IGNORE true #define DRHD0_DEVSCOPE0_TYPE 0x1U #define DRHD0_DEVSCOPE0_ID 0x0U #define DRHD0_DEVSCOPE0_BUS 0x0U #define DRHD0_DEVSCOPE0_PATH 0x10U #define DRHD1_DEV_CNT 0x2U #define DRHD1_SEGMENT 0x0U #define DRHD1_FLAGS 0x1U #define DRHD1_REG_BASE 0xFED91000UL #define DRHD1_IGNORE false #define DRHD1_DEVSCOPE0_TYPE 0x3U #define DRHD1_DEVSCOPE0_ID 0x2U #define DRHD1_DEVSCOPE0_BUS 0xf0U #define DRHD1_DEVSCOPE0_PATH 0xf8U #define DRHD1_DEVSCOPE1_TYPE 0x4U #define DRHD1_DEVSCOPE1_ID 0x0U #define DRHD1_DEVSCOPE1_BUS 0x0U #define DRHD1_DEVSCOPE1_PATH 0xf8U </DRHD_INFO> <CPU_BRAND> "Intel(R) Core(TM) i3-8100 CPU @ 3.60GHz" </CPU_BRAND> <CX_INFO> {{SPACE_FFixedHW, 0x00U, 0x00U, 0x00U, 0x00UL}, 0x01U, 0x01U, 0x00U}, / C1 / {{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1816UL}, 0x02U, 0x97U, 0x00U}, / C2 / {{SPACE_SYSTEM_IO, 0x08U, 0x00U, 0x00U, 0x1819UL}, 0x03U, 0x40AU, 0x00U}, / C3 / </CX_INFO> <PX_INFO> {0xE10UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002400UL, 0x002400UL}, / P0 / {0xD48UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002200UL, 0x002200UL}, / P1 / {0xC80UL, 0x00UL, 0x0AUL, 0x0AUL, 0x002000UL, 0x002000UL}, / P2 / {0xBB8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001E00UL, 0x001E00UL}, / P3 / {0xB54UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001D00UL, 0x001D00UL}, / P4 / {0xA8CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001B00UL, 0x001B00UL}, / P5 / {0x9C4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001900UL, 0x001900UL}, / P6 / {0x8FCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001700UL, 0x001700UL}, / P7 / {0x834UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001500UL, 0x001500UL}, / P8 / {0x76CUL, 0x00UL, 0x0AUL, 0x0AUL, 0x001300UL, 0x001300UL}, / P9 / {0x6A4UL, 0x00UL, 0x0AUL, 0x0AUL, 0x001100UL, 0x001100UL}, / P10 / {0x5DCUL, 0x00UL, 0x0AUL, 0x0AUL, 0x000F00UL, 0x000F00UL}, / P11 / {0x578UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000E00UL, 0x000E00UL}, / P12 / {0x4B0UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000C00UL, 0x000C00UL}, / P13 / {0x3E8UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000A00UL, 0x000A00UL}, / P14 / {0x320UL, 0x00UL, 0x0AUL, 0x0AUL, 0x000800UL, 0x000800UL}, / P15 / </PX_INFO> <CLOS_INFO> clos supported by cache:False clos max:0 </CLOS_INFO> <SYSTEM_RAM_INFO> 00001000-00057fff : System RAM 00059000-0009dfff : System RAM 00100000-3fffffff : System RAM 40400000-ae6bafff : System RAM ae6bd000-b58b7fff : System RAM b6540000-b6549fff : System RAM b6ffe000-b6ffefff : System RAM 100000000-23effffff : System RAM </SYSTEM_RAM_INFO> <BLOCK_DEVICE_INFO> /dev/sda3: TYPE="ext4" /dev/sda4: TYPE="ext4" </BLOCK_DEVICE_INFO> <TTYS_INFO> seri:/dev/ttyS0 type:portio base:0x3F8 irq:4 </TTYS_INFO> <AVAILABLE_IRQ_INFO> 3, 5, 6, 7, 10, 11, 12, 13, 14, 15 </AVAILABLE_IRQ_INFO> <TOTAL_MEM_INFO> 7975552 kB </TOTAL_MEM_INFO> <CPU_PROCESSOR_INFO> 0, 1, 2, 3 </CPU_PROCESSOR_INFO> </acrn-config> sdc.xml <?xml version='1.0' encoding='utf-8'?> <acrn-config board="acer" scenario="sdc"> <vm id="0"> <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">SOS_VM</load_order> <name desc="Specify the VM name which will be shown in hypervisor console command: vm_list.">ACRN SOS VM</name> <uuid configurable="0" desc="vm uuid">dbbbd434-7a57-4216-a12c-2201f1ab0240</uuid> <guest_flags desc="Select all applicable flags for the VM" multiselect="true"> <guest_flag>GUEST_FLAG_HIGHEST_SEVERITY</guest_flag> </guest_flags> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution." /> <memory> <start_hpa configurable="0" desc="The start physical address in host for the VM">0</start_hpa> <size configurable="0" desc="The memory size in Bytes for the VM">CONFIG_SOS_RAM_SIZE</size> </memory> <os_config> <name desc="Specify the OS name of VM, currently it is not referenced by hypervisor code.">ACRN Service OS</name> <kern_type desc="Specify the kernel image type so that hypervisor could load it correctly. Currently support KERNEL_BZIMAGE and KERNEL_ZEPHYR.">KERNEL_BZIMAGE</kern_type> <kern_mod desc="The tag for kernel image which act as multiboot module, it must exactly match the module tag in GRUB multiboot cmdline.">Linux_bzImage</kern_mod> <bootargs configurable="0" desc="Specify kernel boot arguments">SOS_VM_BOOTARGS</bootargs> </os_config> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." readonly="true">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">SOS_COM1_IRQ</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">SOS_COM2_IRQ</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">1</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id> </vuart> <pci_dev_num configurable="0" desc="pci devices number">SOS_EMULATED_PCI_DEV_NUM</pci_dev_num> <pci_devs configurable="0" desc="pci devices list">sos_pci_devs</pci_devs> <board_private> <rootfs desc="rootfs for Linux kernel">/dev/sda3</rootfs> <console desc="ttyS console for Linux kernel">/dev/ttyS0</console> <bootargs desc="Specify kernel boot arguments"> rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3 i915.nuclear_pageflip=1 i915.avail_planes_per_pipe=0x01010F i915.domain_plane_owners=0x011111110000 i915.enable_gvt=1 </bootargs> </board_private> </vm> <vm id="1"> <load_order desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM." readonly="true">POST_LAUNCHED_VM</load_order> <uuid configurable="0" desc="vm uuid">d2795438-25d6-11e8-864e-cb7a18b34643</uuid> <guest_flags desc="Select all applicable flags for the VM" multiselect="true"> <guest_flag /> </guest_flags> <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU."> <pcpu_id>1</pcpu_id> <pcpu_id>2</pcpu_id> <pcpu_id>3</pcpu_id> </vcpu_affinity> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution." /> <epc_section desc="epc section"> <base desc="SGX EPC section base, must be page aligned">0</base> <size desc="SGX EPC section size in Bytes, must be page aligned">0</size> </epc_section> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address." >INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">COM1_IRQ</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">COM2_IRQ</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">1</target_uart_id> </vuart> </vm> <vm configurable="0" desc="specific for Kata" id="2"> <load_order configurable="0" desc="Specify the VM by its load order: PRE_LAUNCHED_VM, SOS_VM or POST_LAUNCHED_VM.">POST_LAUNCHED_VM</load_order> <uuid configurable="0" desc="vm uuid">a7ada506-1ab0-4b6b-a0da-e513ca9b8c2f</uuid> <clos desc="Class of Service for Cache Allocation Technology. Please refer SDM 17.19.2 for details and use with caution.">0</clos> <vcpu_affinity desc="vCPU affinity map. Each vCPU will pin to the selected pCPU ID. Please make sure each vCPU pin to different pCPU."> <pcpu_id>3</pcpu_id> </vcpu_affinity> <epc_section desc="epc section"> <base desc="SGX EPC section base, must be page aligned">0</base> <size desc="SGX EPC section size in Bytes, must be page aligned">0</size> </epc_section> <vuart id="0"> <type configurable="0" desc="vCOM1 type">VUART_LEGACY_PIO</type> <base configurable="0" desc="vUART0 (A.K.A COM1) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM1 irq">COM1_BASE</irq> </vuart> <vuart id="1"> <type configurable="0" desc="vCOM2 type">VUART_LEGACY_PIO</type> <base configurable="0" desc="vUART1 (A.K.A COM2) enabling switch. Enable by exposing its base address, disable by returning invalid base address.">INVALID_COM_BASE</base> <irq configurable="0" desc="vCOM2 irq">COM2_BASE</irq> <target_vm_id desc="COM2 is used for VM communications. When it is enabled, please specify which target VM that current VM connect to.">0</target_vm_id> <target_uart_id configurable="0" desc="target vUART ID that vCOM2 connect to">0</target_uart_id> </vuart> </vm> </acrn-config> Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails." Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails." Disclaimer: "This message is intended only for the designated recipient(s). It may contain confidential or proprietary information and may be subject to other confidentiality protections. If you are not a designated recipient, you may not review, copy or distribute this message. Please notify the sender by e-mail and delete this message. GlobalEdge does not accept any liability for virus infected mails."
More All Messages By This Member

1 - 9 of 9

1

Previous Topic Next Topic

Home Hashtags Subgroups Terms