Hi Geoffroy. I'm little bit confused now. Two things need to be clear. 1. SOS kernel image file - What kernel image should I use? with ACRN Hypervisor v0.3 - org.clearlinux.pk414-sos.4.14.57-69

Are you sure you have the kernel in the right place, your grub entry indicated: /boot/acrn/org.clearlinux.pk414-sos.4.14.74-115 but the kernel is usually placed in a different folder (and under a

Hi. I had changed SOS kernel image to org.clearlinux.iot-lts2018-sos.4.19.0-19. and checked ACRN hypervisor is first boot option with command 'sudo efibootmgr –v'. Also, I did select “ACRN

Meeting Archives: https://drive.google.com/drive/u/2/folders/1_XTGu6re3BOQAjtPx636Mz1T5lOy2UWC ACRN Project TCM - 21st November 2018 Location Online conference link: https://zoom.us/j/45717121 Zoom

The normal boot flow is: EFI BIOS-> acrn.efi->grub->SOS kernel -> user land “ACRN ubuntu SOS appeared in boot list” doesn’t mean the grub must be loaded by acrn.efi. This is why I asked you

Hello, Yang. Thank you for the reply. 1, is your acrn.efi loaded by EFI firmware correctly? You can run “ sudo efibootmgr –v” to check if the “ACRN Hypervisor” is first boot option,

Showing “Black screen” only is hard to know your issue exactly. Also NUC6i5SYH is not official supported hardware, we didn’t run test with it. But can you check below 3 points to narrow

Hello. This is Taekyoung Kim. I have same problem with booting both Clear Linux SOS and Ubuntu SOS. My machine shows black screen and reboots automatically. I have a question regarding this issue. -

HI, Eden: Please take a look at https://github.com/liuming50/meta-acrn-manifest if you have interest, I have ported ACRN+Celadon to Yocto, so you can build and deploy a Celadon Android image within a

Thanks Hongbo. Any update, pls let me known. Best Regards, Eden Chai 发件人: acrn-users@... <acrn-users@...> 代表 Wang, Hongbo <hongbo.wang@...> 发送时间: 2018年11月19日 9:19 收件人:

We’re still working on a setup guide now because Celadon and ACRN has kernel update to 4.19. Best regards. Hongbo Tel: +86-21-6116 7445 MP: +86-1364 1793 689 Mail:hongbo.wang@...

Hi , Anyone could help tell me how to run Celadon as a Guest OS on ACRN on NUC ? Best Regards, Eden

Meeting Minutes Archive: https://drive.google.com/drive/u/2/folders/1_XTGu6re3BOQAjtPx636Mz1T5lOy2UWC ACRN Project TCM - 14th November 2018 Location Online conference link: https://zoom.us/j/45717121

Hi all, We are pleased to announceversion 0.3 release of ACRN. You can see the Release Notes in the website https://projectacrn.github.io/latest/release_notes.html. To learn more about ACRN:

TCM Archives: https://drive.google.com/drive/u/2/folders/1_XTGu6re3BOQAjtPx636Mz1T5lOy2UWC ACRN Project TCM - 7th November 2018 Location Online conference link: https://zoom.us/j/45717121 Zoom

Meeting Archive: https://drive.google.com/drive/u/2/folders/1_XTGu6re3BOQAjtPx636Mz1T5lOy2UWC Location Online conference link: https://zoom.us/j/880368975 Zoom Meeting ID: 880-368-975 If Dial in: +1

Hi, Joe, Thanks for the update, we will also check from our end. Thanks & Best Regards, Jason Chen SSG -> OTC -> Intel Auto Hypervisor Team

Hi Jason, Eventually I found out the culprit: After removing CONFIG_SERIAL_8250_PNP=y from kernel_config_uefi_sos I have the expected behavior. Thanks, Joe

On Mon, Oct 29, 2018 at 08:26 PM, Chen, Jason CJ wrote: Your information make me a little confuse, if we enabled irq auto detection, either the port could detect the real irq as 6, or the port could