Hi Tonny, I did that already and did not work (see my original post), the working trick was to disable the boot entry 0003. Tomasz

I think this has to do with the UP2 UEFI firmware, it gives me problem on my UP2 board. I could never figure out what sequence of commands would reliably set the boot order correctly but I also very

Hi Tomasz, Your `efibootmgr -v` output indicates the #3 entry will be picked up first, which is the fall back boot entry for Systemd-boot. Please change the order with `efibootmgr -o` option. You

Hi Tomasz, After UP2 boot up with native, Could you please try following command with uart disabled first? sudo efibootmgr -c -l "\EFI\acrn\acrn.efi" -d /dev/mmcblk0-p 1 -L "ACRN Hypervisor UP2" -u

Hi, Thanks for the hint. I had no re-enable the UEFI shell boot entry. There I could try to load acrn.efi: and it loaded well. So that gave me an idea: I disabled the boot 0003 entirely (namely

Hi Tomasz, Not sure whether you are familiar with EFI shell. If yes, can you try to load acrn.efi from EFI shell? That make sure the ACRN is loaded. Regards

Hi, That I figured out already yes. But why? (installer did not show any issue, the only thing which seems suspicious is the EFI bootorder as I described) And how to fix this? Thanks, Tomasz

This means you boot sos kernel directly without ACRN. Regards Yin, Fengwei

Hi, I cannot get ACRN hypervisor running on my setup: - UP² board (Celeron N3350) - Clear Linux, fresh install, version 32910 I followed the documentation here: -

Special Notes: If you have Zoom connection issue by using web browser, pleaseinstall & launch Zoom application, manually input the meeting ID(320664063) to join the Zoom meeting. Agenda &

Special Notes: If you have Zoom connection issue by using web browser, please launch Zoom application, manually input the meeting ID(320664063) to join the Zoom meeting. ACRN Project TCM - 22th Apr

Special Notes: If you have Zoom connection issue by using web browser, pleaseinstall & launch Zoom application, manually input the meeting ID(320664063) to join the Zoom meeting. Topic (4/22): ACRN

Special Notes: If you have Zoom connection issue by using web browser, please launch Zoom application, manually input the meeting ID(320664063) to join the Zoom meeting. ACRN Project TCM - 15th Apr

Hi all, If you have Zoom connection issue by using web browser, please launch Zoom application, manually input the meeting ID (320664063)to join the Zoom meeting. Zoom has security hole which are

Hi all, · There is some issues about login in Zoom use web, please use Zoom PC client to login in and input “Zoom Meeting ID:320 664 063”, thanks! BRs, Xiangyang Wu.

ACRN Project TCM - 8th Apr 2020 Location Online by Zoom: https://zoom.com.cn/j/320664063 Attendees (Total 42, 8/4) Note: If need to edit this document, please ask for access. We disabled

Topic (4/8):CSE Virtualization Introduction Presenter: Winkler, Tomas Short description: ACRN CSE introduction, we’ll talk about CSE and its virtualization within ACRN device model.

Hi Steve, "fine" here means the build work or the ACRN serial console also work? Regards Yin, Fengwei

Thanks for the confirmation! Cheers, Geoffroy

Hi Geoffroy, Container build works fine. Cheers Steve. -- Engineering Director IOTech Systems Ltd.