Hi Siming Following kernel cmdline is the default values of acrn.bin: root=/dev/sda3 console=ttyS0 rw rootwait console=tty0 consoleblank=0 no_timer_check quiet loglevel=3 i915.nuclear_pageflip=1

hi, I builded the V2.0 with ubuntu on board NUC7i5BNH. It works fine, but there is something wrong in cmdline. $ cat /proc/cmdline root=/dev/sda3 console=ttyS0 rw rootwait console=tty0

sorry I missunderstand the 'native boot' for Normal Boot without acrn hypervisor and kernel VMX and VT-D already enabled in the BIOS arcn.bin efi and bzImage are attached. Thanks for your

Hi Xu Teng Can you get console log for native boot? Need hv console log to check what happened with following menu. menuentry "ACRN Multiboot Ubuntu Service VM" --id ubuntu-service-vm {

acrn boot failed so I run into native mode and get this BR XuTeng

I remake acrn with RELEASE=0, cp acrn.bin to /boot/acrn/ but still failed . I reinstalled the grub-2.05 uefi to /boot/efi/EFI/BOOT/ , and modifyed the grub.cfg in this dir my grub.cfg : ``` ###

"root@acrn-OptiPlex-5040:~# dmesg |grep ACRN [ 0.878968] ACRNTrace: acrn_trace: not support acrn hypervisor! [ 0.878971] ACRN HVLog: acrn_hvlog: not running under acrn hypervisor!"

Hi Xu Teng Do you build acrn with RELEASE=0? If yes; you can get Hypervisor log for ACRN boot with the same cable connection; as well you can get console log with native boot. Please boot with

attach the scenario xml how to get the hypervisor log in native boot mode ? 徐滕 架构师 大同普云大数据有限公司 DATONG PUYUN BIG DATA

Hi Xu Teng Please also share your scenario xml. Do you have any hypervisor log for this issue? BR. Fuzhong From: acrn-users@... <acrn-users@...>On Behalf Of "?? Sent: Thursday, August 20,

Hi, Fuzhong ! Thanks for your reply. I generated the board and scenario xmls using acrn config tools , rebuilt the hypervisor and kernel , update grub , but still stuck ... This is some

ACRN Project TCM - 19th August 2020 Location Online by Zoom: https://zoom.com.cn/j/320664063 Attendees (Total 25, 19/8) Note: If you need to edit this document, please ask for access. We disabled

Hi Xu Teng Thanks for trying acrn on dell optiplex. Please help to boot with native and run: /proc/cpuinfo |grep processor For new platform, please refer following guide to generate board

Hi folks: we have tryed to install sos (ubuntu-18.04) and uos(ubuntu-18.04) on a dell optiplex( i5-6500T 16GB nvme + sata), build acrn hypervisor and kernel , update the grub , these steps all

Hi Siming, Please raise a git issue, will follow up in github. Thanks! BR. Fuzhong From: acrn-users@... <acrn-users@...>On Behalf Of siming Sent: Saturday, August 15, 2020 12:03 PM To:

hi, Following the instructions of the doc https://projectacrn.github.io/1.6/tutorials/using_windows_as_uos.html , but it did not show windows installation on the HDMI screen. This is my build

Hi all, We are very pleased to announceVersion 2.1 release of ACRN. You can see the release blog from https://projectacrn.org/blog/ and detailed Release Notes in website

Hi Siming, This is not a topic on the ACRN mail list. You could ask on clear linux community. Regards Yin, Fengwei

Hi, I builded a clr-linux in the NVMe disk, and installed many packs, like vim, net-tools, service-os ... Now I want build another clr-linux in the Sata disk with the same version. I copied the

ACRN Project TCM - 5th Aug 2020 Location 1. Online by Zoom:https://zoom.com.cn/j/320664063 Attendees (Total 21, 5/8) Note: If you need to edit this document, please ask for access. We