Re: some issues when launch debian and windows uos
ZhangShuai
updates
Change to a WhiskyLake Platform,
still have these issues.
I enabled the serial port of the WHL, got some debug messages of ACRN when launch sos and uos. 1. at acrn startup, the uart output: [11007973us][cpu=0][vm0:vcpu0][sev=2][seq=37]:vpci_write_cfg 0:1c.1 not found! off: 0xdb, val: 0xbf [11018799us][cpu=0][vm0:vcpu0][sev=2][seq=38]:vpci_write_cfg 0:1c.2 not found! off: 0xdb, val: 0xbf [11029675us][cpu=0][vm0:vcpu0][sev=2][seq=39]:vpci_write_cfg 0:1c.3 not found! off: 0xdb, val: 0xbf ...... 2. when launch a uos (debian, ubuntu
or clr linux), the uart output :
[721704238us][cpu=0][vm0:vcpu0][sev=3][seq=224]:ret=-1
hypercall=0x80000080 failed in vmcall_vmexit_handler
[721716301us][cpu=0][vm0:vcpu0][sev=3][seq=225]:ret=-1 hypercall=0x80000080 failed in vmcall_vmexit_handler [721727986us][cpu=0][vm0:vcpu0][sev=3][seq=226]:ret=-1 hypercall=0x80000080 failed in vmcall_vmexit_handler [721739730us][cpu=0][vm0:vcpu0][sev=3][seq=227]:ret=-1 hypercall=0x80000080 failed in vmcall_vmexit_handler [733552988us][cpu=0][vm1:vcpu0][sev=3][seq=230]:vlapic: Start Secondary VCPU1 for VM[1]... 3. at the first time of running
install_win.sh, got the message like below. I saw the UEFI shell
on the HDMI screen, then the WHL restarted.
[758442306us][cpu=0][vm0:vcpu0][sev=1][seq=224]:vpci_assign_pcidev
0:14.0 not support FLR or not support PM reset
[758549509us][cpu=0][vm0:vcpu0][sev=3][seq=225]:ret=-1 hypercall=0x80000080 failed in vmcall_vmexit_handler [758575283us][cpu=0][vm0:vcpu0][sev=3][seq=226]:ret=-1 hypercall=0x80000080 failed in vmcall_vmexit_handler [758602622us][cpu=0][vm0:vcpu0][sev=3][seq=227]:ret=-1 hypercall=0x80000080 failed in vmcall_vmexit_handler [758629819us][cpu=0][vm0:vcpu0][sev=3][seq=228]:ret=-1 hypercall=0x80000080 failed in vmcall_vmexit_handler After this time, the system always
restarted directly when running install_win.sh. Nothing output
on the uart.
Best Regards,
ZhangShuai On 2021/3/19 上午10:57, zhangshuai
wrote:
Hi all, -- Xi'an R&D Center Computerized Numerical Control R&D Dept. Shuai Zhang Tel : 029-84503040-8360 E-mail : zhangshuai@... Web : www.jingdiao.com
|
|