Re: Supported Hardware help needed
Geoffroy Van Cutsem
toggle quoted messageShow quoted text
I would have the same recommendation than Andrew ;-). The easiest path initially is to stick to HW that is known to work and is being tested. I saw in a subsequent email that you have decided to go for the DNHE version, I also agree this is a good choice :-). It gives you flexibility in that you can easily add an additional disk in there (particularly interesting if you want to dedicate HW to a VM, for a pre-launched or a Real-Time VM for example).things.
The other nice advantage that NUC has is it's possible to add a serial port to it very easily (something that is not possible with many of the NUCs in general). For details on how to do that, take a look at those links:
Note that the use of the serial port is considered a debug feature, if you build ACRN with RELEASE=1 then this is completely disabled. It's nevertheless a great asset when developing and working with ACRN initially!
Nice to hear that!!
4GB may be a bit limiting depending on what User VMs you want to run. But it shouldn't prevent ACRN from running at all. The UP2 board has 2 serial ports, which one are you trying to use?
Have you seen this guide? https://projectacrn.github.io/2.1/tutorials/up2.html